Date: Thu, 10 Apr 2003 00:56:44 -0700 From: Joseph Maxwell <jemaxwell@jaymax.com> To: Derrick Ryalls <ryallsd@datasphereweb.com> Cc: questions@FreeBSD.ORG Subject: Re: Mboard + CPU Upgrade Message-ID: <3E9523BC.B3E232CE@jaymax.com> References: <003b01c2faf0$65c5c4b0$0200a8c0@bartxp>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks Derrick, your suggestion worked for initial probe, now UNEXPECTED INCONSISTENCY & fsck problems Derrick Ryalls wrote: > > > > Differences - > > > > Old Architecture: > > > > Shuttle AI61 motherboard > > AMD K7 CPU Processor 900 Mhz > > AMD751 Chipset > > 3 DIMM Sockets > > > > New Architecture: > > > > Shuttle AK32A motherboard > > AMD Athlon CPU 1.5 GHz > > Chipset(s) - 2: VIA VT8366A & VIA VT8233 > > 2 DIMM Sockets each, DDR/SDR > > > > Similarities: > > > > Same Hard drives (2 - Boot & data) > > Memory sticks > > 5 PCI & 1 AGP slots > > 3 PC Cards > > A Diamond Stealth Video Card > > A line modem card > > A SMC NIC > > > > I transferred all the cards including the NIC to ensure > > similarity of Hardware Profile. Machine boots partially, > > probing devices, listing to stdout. Readout aborts > > consistently at a line which is difficult to read on the fly, > > but the last few lines have been extracted, which from by > > naive point of view seems to indicate a USB problem. I've > > done a reconfig of kernel, no significant difference or > > conflicts were found. I've double check the BIOS to make sure > > all relevant USB / PCI options are enabled ( at least so I > > think ). The messages from the last few lines of the probe > > are as follows: > > > > ahci0: <VIA 83C572 USB Controller> port 0xd400-0xd41f irq11 > > at dcsi.... > > > > cio > > <VIA 83C572 USB Controller>> on ubc 10 > > usb0: USB revision 1.0 > > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub0: 2 ports with 2 removable, self powered > > > > At this point, last line above, the screen blanks out, > > process exits presumably. Any suggestions or help would be > > greatly appreciated. > > Shot in the dark here, but perhaps it is a difference in the USB > version. Maybe old one had USB 1 and new one supports USB 2. If you > have no USB devices (or want to see anyway), try going into BIOS and > disabling or clocking down the USB ports. > > Good luck.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E9523BC.B3E232CE>