From owner-freebsd-scsi  Mon Dec 11 10:46:11 2000
From owner-freebsd-scsi@FreeBSD.ORG  Mon Dec 11 10:46:09 2000
Return-Path: <owner-freebsd-scsi@FreeBSD.ORG>
Delivered-To: freebsd-scsi@freebsd.org
Received: from search.sparks.net (search.sparks.net [208.5.188.60])
	by hub.freebsd.org (Postfix) with ESMTP id E0E5137B400
	for <freebsd-scsi@freebsd.org>; Mon, 11 Dec 2000 10:46:08 -0800 (PST)
Received: by search.sparks.net (Postfix, from userid 100)
	id D594BDC74; Mon, 11 Dec 2000 13:44:32 -0500 (EST)
Received: from localhost (localhost [127.0.0.1])
	by search.sparks.net (Postfix) with ESMTP id CAE57D93D
	for <freebsd-scsi@freebsd.org>; Mon, 11 Dec 2000 13:44:32 -0500 (EST)
Date: Mon, 11 Dec 2000 13:44:32 -0500 (EST)
From: David Miller <dmiller@sparks.net>
To: freebsd-scsi@freebsd.org
Subject: LUN 1 on 3.2-R?
Message-ID: <Pine.BSF.4.21.0012111337570.8976-100000@search.sparks.net>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-scsi@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org

Hi All:)

I'm stumped.  I have a 3.2R system with an attached external SCSI-SCSI
RAID controller.  I had a nice 10 drive array last year with 36 GB drives,
and this year I'm adding on another nice array.

I have this in my config file:

# SCSI peripherals
# Only one of each of these is needed, they are dynamically allocated.
controller      scbus0          # SCSI bus (required)
# device                da0             # Direct Access (disks)
disk          da0 at scbus0 target 2 unit 0
disk          da1 at scbus0 target 2 unit 1
device          sa0             # Sequential Access (tape etc)
device          cd0             # CD
device          pass0           # Passthrough device (direct SCSI)


But in dmesg I get:

Waiting 5 seconds for SCSI devices to settle
pass1 at ahc0 bus 0 target 2 lun 1
pass1: <CHAPTEC G5312 G2.2> Fixed Processor SCSI-2 device 
pass1: 80.000MB/s transfers (40.000MHz, offset 127, 16bit), Tagged
Queueing Enabled
pass2 at ahc0 bus 0 target 2 lun 2
pass2: <JMR ELEC FORTRA SERIES. 1.00> Fixed Processor SCSI-2 device 
pass2: 80.000MB/s transfers (40.000MHz, offset 127, 16bit)
da0 at ahc0 bus 0 target 2 lun 0
da0: <CHAPTEC G5312 G2.2> Fixed Direct Access SCSI-2 device 
da0: 80.000MB/s transfers (40.000MHz, offset 127, 16bit), Tagged Queueing
Enabled
da0: 279097MB (571591680 512 byte sectors: 255H 63S/T 35579C)
changing root device to wd0s1a


camcontrol devlist:

su-2.03# camcontrol devlist
<CHAPTEC G5312 G2.2>               at scbus0 target 2 lun 0 (pass0,da0)
<CHAPTEC G5312 G2.2>               at scbus0 target 2 lun 1 (pass1)
<JMR ELEC FORTRA SERIES. 1.00>     at scbus0 target 2 lun 2 (pass2)


The associated da* and pass* devices seem to exist.

What am I missing?

Thanks in advance,

--- David



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message