Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 6 Sep 2013 18:37:29 +0000
From:      John <jwd@FreeBSD.org>
To:        FreeBSD SCSI <freebsd-scsi@freebsd.org>
Subject:   Re: Hung boot - mps related?
Message-ID:  <20130906183728.GA68463@FreeBSD.org>
In-Reply-To: <20130905022028.GA28801@FreeBSD.org>
References:  <20130905022028.GA28801@FreeBSD.org>

next in thread | previous in thread | raw e-mail | index | archive | help
----- John's Original Message -----
> Hi Folks,
> 
>    I updated one of my servers today to the latest 9-stable. The system
> starts to boot up and then hangs with the following:
> 
> mps1: _mapping_add_new_device: failed to add the device with handle 0xe1 to persistent table because there is no free space available
> 
> run_interupt_driven_hooks: still waiting after 60 seconds for xpt_config
> run_interupt_driven_hooks: still waiting after 120 seconds for xpt_config
> run_interupt_driven_hooks: still waiting after 180 seconds for xpt_config
> run_interupt_driven_hooks: still waiting after 240 seconds for xpt_config
> run_interupt_driven_hooks: still waiting after 300 seconds for xpt_config

   Well, there's nothing like following up on your own posting. My apologies
for not seeing this one sooner.  One of my 9207-8e cards didn't have an
up-to-date bios/firmware on it.

   After downloading the latest from the LSI website, the system once
again boots up correctly, and a bit more quickly.

   For the record:

# sas2flash -biosall mptsas2.rom
...

# sas2flash -fwall 9207-8e.bin
...

# sas2flash -listall
LSI Corporation SAS2 Flash Utility
Version 17.00.00.00 (2013.07.19)
Copyright (c) 2008-2013 LSI Corporation. All rights reserved

        Adapter Selected is a LSI SAS: SAS2308_2(D1)

Num   Ctlr            FW Ver        NVDATA        x86-BIOS         PCI Addr
----------------------------------------------------------------------------

0  SAS2308_2(D1)   17.00.01.00    11.00.00.05    07.33.00.00     00:0a:00:00
1  SAS2308_2(D1)   17.00.01.00    11.00.00.05    07.33.00.00     00:27:00:00

        Finished Processing Commands Successfully.
        Exiting SAS2Flash.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20130906183728.GA68463>