Date: Wed, 03 Mar 1999 01:14:13 +0000 From: Erik Umenofer <eriku@silcom.com> To: multimedia@freebsd.org Subject: DMA/IRC timeout on SB16 Message-ID: <36DC8CE5.E75C9A81@silcom.com>
next in thread | raw e-mail | index | archive | help
Hi.
I have a Vibra16x
pnpinfo says...
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID CTL00f0 (0xf0008c0e), Serial Number 0xffffffff
PnP Version 1.0, Vendor Version 16
Device Description: Creative ViBRA16X PnP
Logical Device ID: CTL0043 0x43008c0e #0
Device Description: Audio
TAG Start DF
Good Configuration
IRQ: 5 - only one type (true/edge)
DMA: channel(s) 1
8-bit, not a bus master, count by byte, , Compatibility mode
DMA: channel(s) 3
8-bit, not a bus master, count by byte, , Compatibility mode
I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10
[16-bit addr]
I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4Acceptable
Configuration
IRQ: 5 7 9 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
[16-bit addr]
TAG Start DF
dmesg.....
sb0 at 0x220 irq 5 drq 1 on isa
snd0: <SoundBlaster 16 4.16>
sbxvi0 at drq 5 on isa
snd0: <SoundBlaster 16 4.16>
sbmidi0 at 0x330 on isa
snd0: <SoundBlaster MPU-401>
opl0 at 0x388 on isa
snd0: <Yamaha OPL3 FM>
Loosk good huh??
well....
Sound: DMA (output) timed out - IRQ/DRQ config error?
is all i get....
I've tried drq's 1, 3 but then it says on dmesg
sb0 at 0x220 irq 5 drq 1 on isa
snd0: <SoundBlaster 16 4.16>
SB16 Error: Invalid DMA channel 1/3
bxvi0 not found
sbmidi0 at 0x330 on isa
snd0: <SoundBlaster MPU-401>
opl0 at 0x388 on isa
snd0: <Yamaha OPL3 FM>
How do I tweak my dma's so that it doesnt' time out and the kernel likes
it
ive tried 1,3 and 1,5
WHat else can I do.
IRQ 5 is correct.
erik
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?36DC8CE5.E75C9A81>