Date: Thu, 3 Jul 2003 20:01:21 -0400 From: Kenneth Culver <culverk@yumyumyum.org> To: Laszlo Vagner <george@vagner.com> Cc: questions@freebsd.org Subject: Re: pcm on 5.1 Message-ID: <A5179638-ADB2-11D7-8AA8-0003939B3BD6@yumyumyum.org> In-Reply-To: <3F04C339.70804@vagner.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thursday, July 3, 2003, at 07:58 PM, Laszlo Vagner wrote: > I just updated to 5.1-r and was wondering how to add soundcard support > to the > kernel.? > > in 4.8 i just added 'device pcm' in my kernel config and recompiled > but 5.1 is different > and i dont want to do something to mess things up. > > dmesg follows. > Just do what you've always done. Add device pcm to your kernel. Ken > > amd2000# dmesg > Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003 > root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC > Preloaded elf kernel "/boot/kernel/kernel" at 0xc06d4000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06d4244. > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 1666738222 Hz > CPU: AMD Athlon(TM) XP 2000+ (1666.74-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x662 Stepping = 2 > > Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE > ,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > AMD Features=0xc0400000<AMIE,DSP,3DNow!> > real memory = 536854528 (511 MB) > avail memory = 514064384 (490 MB) > Pentium Pro MTRR support enabled > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <ASUS A7V8X > on motherboard > pcibios: BIOS version 2.10 > Using $PIR table, 12 entries at 0xc00f1cd0 > acpi0: power button is handled as a fixed feature programming model. > Timecounter "ACPI-fast" frequency 3579545 Hz > acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 > acpi_cpu0: <CPU> on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <VIA Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at > device 0.0 on pci0 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > fwohci0: <VIA VT6306> port 0xd800-0xd87f mem 0xed800000-0xed8007ff irq > 5 at device 7.0 on pci0 > fwohci0: OHCI version 1.0 (ROM=1) > fwohci0: No. of Isochronous channel is 8. > fwohci0: EUI64 00:e0:18:00:00:08:81:a6 > fwohci0: Phy 1394a available S400, 3 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > if_fwe0: <Ethernet over FireWire> on firewire0 > if_fwe0: Fake Ethernet address: 02:e0:18:08:81:a6 > sbp0: <SBP2/SCSI over firewire> on firewire0 > fwohci0: Initiate bus reset > atapci0: <Promise PDC20376 SATA150 controller> port > 0xb800-0xb87f,0xd000-0xd00f,0xd400-0xd43f mem > 0xec800000-0xec81ffff,0xed000000-0xed000fff irq 5 at device 8.0 on > pci0 > ata2: at 0xed000000 on atapci0 > ata3: at 0xed000000 on atapci0 > ata4: at 0xed000000 on atapci0 > pci0: <network, ethernet> at device 9.0 (no driver attached) > ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xb400-0xb4ff mem > 0xeb800000-0xeb800fff irq 9 at device 12.0 on pci0 > aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs > xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xb000-0xb03f irq 11 at > device 13.0 on pci0 > xl0: Ethernet address: 00:10:4b:95:5f:63 > miibus0: <MII bus> on xl0 > nsphy0: <DP83840 10/100 media interface> on miibus0 > nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > xl1: <3Com 3c905-TX Fast Etherlink XL> port 0xa800-0xa83f irq 5 at > device 14.0 on pci0 > xl1: Ethernet address: 00:60:97:7b:22:56 > miibus1: <MII bus> on xl1 > nsphy1: <DP83840 10/100 media interface> on miibus1 > nsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > uhci0: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 9 at device > 16.0 on pci0 > usb0: <VIA 83C572 USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhub0: port error, restarting port 1 > uhub0: port error, giving up port 1 > umass0: Shuttle Technology Inc. eUSCSI Bridge Ver 1.11, rev 1.00/1.00, > addr 2 > umass0: Get Max Lun not supported (STALLED) > uhub0: port error, restarting port 2 > uhub0: port error, giving up port 2 > uhci1: <VIA 83C572 USB controller> port 0xa000-0xa01f irq 9 at device > 16.1 on pci0 > usb1: <VIA 83C572 USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <VIA 83C572 USB controller> port 0x9800-0x981f irq 9 at device > 16.2 on pci0 > usb2: <VIA 83C572 USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > pci0: <serial bus, USB> at device 16.3 (no driver attached) > isab0: <PCI-ISA bridge> at device 17.0 on pci0 > isa0: <ISA bus> on isab0 > atapci1: <VIA 8235 UDMA133 controller> port 0x9400-0x940f at device > 17.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci1 > ata1: at 0x170 irq 15 on atapci1 > pci0: <multimedia, audio> at device 17.5 (no driver attached) > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port > 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > sio1 port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > Timecounters tick every 10.000 msec > fwohci0: BUS reset > fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode > firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) > firewire0: bus manager 0 (me) > ad0: 114473MB <ST3120023A> [232581/16/63] at ata0-master UDMA100 > acd0: CD-RW <LITE-ON LTR-52246S> at ata1-master PIO4 > acd1: CDROM <CD-ROM 36X/AKU> at ata1-slave PIO4 > Waiting 15 seconds for SCSI devices to settle > da0 at ahc0 bus 0 target 0 lun 0 > da0: <SEAGATE ST318451LW 0002> Fixed Direct Access SCSI-3 device > da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged > Queueing Enabled > da0: 17501MB (35843671 512 byte sectors: 255H 63S/T 2231C) > da1 at umass-sim0 bus 0 target 0 lun 0 > da1: <CWS ORB2 -SE U ID 0 D29> Removable Direct Access SCSI-2 device > da1: 1.000MB/s transfers > da1: 2103MB (4307184 512 byte sectors: 255H 63S/T 268C) > Mounting root from ufs:/dev/da0s1a > dragon_saver: the console does not support M_VGA_CG320 > module_register_init: MOD_LOAD (dragon_saver, 0xc1534c70, 0) error 19 > cd9660: RockRidge Extension > umass0: Phase Error, residue = 0 > (da1:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi > status == 0x0 > amd2000# > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?A5179638-ADB2-11D7-8AA8-0003939B3BD6>