Date: Fri, 30 Apr 1999 09:51:38 -0300 (EST) From: Paulo Fragoso <paulo@nlink.com.br> To: Wilko Bulte <wilko@yedi.iaf.nl> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: CD SCSI Message-ID: <Pine.BSF.3.96.990430093802.21075A-100000@mirage.nlink.com.br> In-Reply-To: <199904292104.XAA13089@yedi.iaf.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi,
I'm using Adaptec 2940 SCSI. It have suport to ultra-wide scsi devices,
now I have disabled this options in board setup. After this, I haven't
found the problem, yet. But my scsi devices are a bit slower than before.
I'm using one Sony cdrom cdu-76s and one HP cd-writer 6020. The problem
happened more with HP.
My demsg:
------------------------------------------------------------------------
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-19990426-STABLE #4: Wed Apr 28 11:41:54 EST 1999
paulo@seneca.nlink.com.br:/usr/src/sys/compile/KERNEL1
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (200.46-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping=3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
avail memory = 61755392 (60308K bytes)
Preloaded elf kernel "kernel" at 0xc035d000.
Probing for devices on PCI bus 0:
chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip2: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3
de0: <Digital 21041 Ethernet> rev 0x21 int a irq 11 on pci0.17.0
de0: 21041 [10Mb/s] pass 2.1
de0: address 00:80:c8:55:e5:4d
ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 10 on pci0.18.0
ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 15 on
pci0.20.0
Probing for PnP devices:
CSN 1 Vendor ID: CSC4236 [0x3642630e] Serial 0xffffffff Comp ID: @@@0000
[0x0000
0000]
mss_attach <CS4236>1 at 0x530 irq 5 dma 1:3 flags 0x13
pcm1 (CS423x/Yamaha/AD1816 <CS4236> sn 0xffffffff) at 0x530-0x537 irq 5
drq 1 fl
ags 0x13 on isa
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
ppc0 at 0x378 on isa
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppb0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 5L/0101.03> HP ENHANCED PCL5,PJL
lpt0: <generic printer> on ppbus 0
ppi0: <generic parallel i/o> on ppbus 0
lpt0: <generic printer> on ppbus 0
pcm0 not probed due to drq conflict with pcm1 at 1
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
wdc1 not found at 0x170
wt0 not probed due to drq conflict with pcm1 at 1
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
adv0 not found at 0x330
bt_isa_probe: Probe failled for card at 0x330
bt_isa_probe: Probe failled for card at 0x334
bt_isa_probe: Probe failled for card at 0x230
bt_isa_probe: Probe failled for card at 0x234
bt_isa_probe: Probe failled for card at 0x130
bt_isa_probe: Probe failled for card at 0x134
bt0 not found at 0x134
aha0 not found at 0x134
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Intel Pentium detected, installing workaround for F00F bug
IP packet filtering initialized, divert disabled, rule-based forwarding
enabled,
default to accept, unlimited logging
IP Filter: initialized. Default = pass all, Logging = enabled
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 3 lun 0
sa0: <SONY SDT-4000E E326> Removable Sequential Access SCSI-2 device
sa0: 5.000MB/s transfers (5.000MHz, offset 8)
changing root device to da0s1a
da1 at ahc0 bus 0 target 1 lun 0
da1: <CONNER CFP2105S 2.14GB 172A> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 2048MB (4194304 512 byte sectors: 255H 63S/T 261C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL_TM3200S 300X> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 3067MB (6281856 512 byte sectors: 255H 63S/T 391C)
cd0 at ahc0 bus 0 target 2 lun 0
cd0: <SONY CD-ROM CDU-76S 1.1a> Removable CD-ROM SCSI-2 device
cd0: 5.681MB/s transfers (5.681MHz, offset 15)
cd0: cd present [328163 x 2048 byte records]
da2 at ahc0 bus 0 target 5 lun 0
da2: <IOMEGA ZIP 100 D.09> Removable Direct Access SCSI-2 device
da2: 3.300MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
WARNING: / was not properly dismounted
de0: enabling BNC port
cd1 at ahc0 bus 0 target 4 lun 0
cd1: <HP CD-Writer 6020 1.07> Removable CD-ROM SCSI-2 device
cd1: 3.300MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Logical unit not
ready, cau
se not reportable
de0: enabling BNC port
de0: promiscuous mode enabled
sio0: 1 more silo overflow (total 1)
Many Thanks,
Paulo.
On Thu, 29 Apr 1999, Wilko Bulte wrote:
> As Paulo Fragoso wrote ...
> > Hi,
> >
> > After upgrade from 3.1-RELEASE to 3.1-19990426-STABLE, I'm having problems
> > with second scsi cdrom. When I reboot my sistem, it's reborting
> > this some time:
> >
> > (cd1:ahc0:0:4:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
> > (cd1:ahc0:0:4:0): Vendor Specific info:80000000 asc:d0,0
> > (cd1:ahc0:0:4:0): Vendor Specific ASC
> > (cd1:ahc0:0:4:0): fatal error, failed to attach to device
> > (cd1:ahc0:0:4:0): lost device
> > (cd1:ahc0:0:4:0): removing device entry
> >
> > I have two scsi cdroms.
>
> Please tell us what kind of CDROM: manufacturer, model, firmware rev.
> dmesg will tell you . Or 'cat /var/run/dmesg.boot'
>
> Groeten / Cheers,
>
> | / o / / _ Arnhem, The Netherlands - Powered by FreeBSD -
> |/|/ / / /( (_) Bulte WWW : http://www.tcja.nl http://www.freebsd.org
>
------
" ... Overall we've found FreeBSD to excel in performace, stability,
technical support, and of course price. Two years after discovering
FreeBSD, we have yet to find a reason why we switch to anything else"
-David Filo, Yahoo!
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.990430093802.21075A-100000>