Date: Wed, 23 Feb 2005 23:42:52 +0100 From: Tsung-Han Lin <lintn@studi.informatik.uni-stuttgart.de> To: freebsd-acpi@freebsd.org Message-ID: <200502232242.j1NMgq37027872@marvin.informatik.uni-stuttgart.de>
next in thread | raw e-mail | index | archive | help
I newly install FreeBSD 5.3 in my laptop. As soon as installed, I do "cvsup source/ports" and "make world/build kernel". Some bothering problems occur. 1) I close the lid, or use any "Fn"(IBM Function key) -> System hangs. 2) System go to sleep mode or just close the display, when system was long time idle, but system can not go back to alive. It hangs? all stop! 2) I disable(unload) acpi.ko when booting. -> System hangs(sometimes system can not finish boot process.) 3) I compile acpi.ko with ACPI_DEBUG. -> System can not boot, message as "... acpi.ko could not finalize." 4) I check "vmstat -i", jap. I got interrupt storm! CTRL+ALT+ESC can not work, when system hangs. I just begin sammeln the information about error, I try to figure out the key problem and fix it. and hope some one could help me. thanks. My Laptop: ____________________________________________________ | FreeBSD 5.3-RELEASE-p5 |____________________________________________________ | IBM ThinkPad X31 | Machine Type/Model 2672-IQV | BIOS Version 1QET78WW (2.15) (latest) | Embedded Controller Version: 1QHT19WW(1.06) (latest) |_____________________________________________________ following are "dmesg", "hw.acpi", "ASL". _____________________________________________________ boot -v ______________________________________________________ Calibrating TSC clock ... TSC clock: 1498734295 Hz CPU: Intel(R) Pentium(R) M processor 1500MHz (1498.73-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Stepping = 5 Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> real memory = 536215552 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000826000 - 0x000000001f631fff, 518045696 bytes (126476 pages) avail memory = 519241728 (495 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6af0 bios32: Entry = 0xfd750 (c00fd750) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd6e0+0x1f6 pnpbios: Found PnP BIOS data at 0xc00f6b70 pnpbios: Entry = f0000:b616 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> io: <I/O> mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <IBM TP-1Q> on motherboard acpi0: [MPSAFE] acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x66,0x62 on acpi0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=33408086) pcibios: BIOS version 2.10 Found $PIR table, 15 entries at 0xc00fdea0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 1 2 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 1 2 2 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 D 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 9 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 9 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 9 2 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 8 A 0x68 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 2 dev 0 func 0 AcpiOsDerivePciId: bus 2 dev 0 func 1 AcpiOsDerivePciId: bus 0 dev 29 func 7 acpi0: Power Button (fixed) atpic: Programming IRQ9 as level/low acpi_ec0: info: new max delay is 70 us ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 3, width = 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 unknown: not probed (disabled) cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 0.29.0 \\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 0.29.1 \\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 0.29.2 \\_SB_.LNKH irq 0: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 0.29.3 \\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 0.31.0 \\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 0.31.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base d0000000, size 28, enabled found-> vendor=0x8086, dev=0x3340, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3341, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001800, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA) pcib0: possible interrupts: 3 4 5 6 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.LNKC (references 2, priority 5147): interrupts: 11 10 5 9 7 6 4 3 penalty: 60 60 110 120 5060 5060 5060 5060 \\_SB_.LNKA (references 1, priority 2573): interrupts: 11 10 5 9 7 6 4 3 penalty: 60 60 110 120 5060 5060 5060 5060 \\_SB_.LNKD (references 1, priority 2573): interrupts: 11 10 5 9 7 6 4 3 penalty: 60 60 110 120 5060 5060 5060 5060 \\_SB_.LNKH (references 1, priority 2573): interrupts: 11 10 5 9 7 6 4 3 penalty: 60 60 110 120 5060 5060 5060 5060 \\_SB_.LNKB (references 1, priority 2573): interrupts: 11 10 5 9 7 6 4 3 penalty: 60 60 110 120 5060 5060 5060 5060 pcib0: slot 29 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x24c2, revid=0x01 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD) pcib0: possible interrupts: 3 4 5 6 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.LNKC (references 2, priority 5285): interrupts: 10 11 5 9 7 6 4 3 penalty: 120 130 170 240 5120 5120 5120 5120 \\_SB_.LNKD (references 1, priority 2642): interrupts: 10 11 5 9 7 6 4 3 penalty: 120 130 170 240 5120 5120 5120 5120 \\_SB_.LNKH (references 1, priority 2642): interrupts: 10 11 5 9 7 6 4 3 penalty: 120 130 170 240 5120 5120 5120 5120 \\_SB_.LNKB (references 1, priority 2642): interrupts: 10 11 5 9 7 6 4 3 penalty: 120 130 170 240 5120 5120 5120 5120 pcib0: slot 29 INTB routed to irq 11 via \\_SB_.LNKD found-> vendor=0x8086, dev=0x24c4, revid=0x01 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 00001840, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC) pcib0: possible interrupts: 3 4 5 6 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.LNKC (references 2, priority 5422): interrupts: 10 11 5 9 7 6 4 3 penalty: 180 200 230 360 5180 5180 5180 5180 \\_SB_.LNKH (references 1, priority 2711): interrupts: 10 11 5 9 7 6 4 3 penalty: 180 200 230 360 5180 5180 5180 5180 \\_SB_.LNKB (references 1, priority 2711): interrupts: 10 11 5 9 7 6 4 3 penalty: 180 200 230 360 5180 5180 5180 5180 pcib0: slot 29 INTC routed to irq 11 via \\_SB_.LNKC found-> vendor=0x8086, dev=0x24c7, revid=0x01 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[10]: type 1, range 32, base c0000000, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.LNKH) pcib0: possible interrupts: 3 4 5 6 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.LNKH (references 1, priority 2781): interrupts: 10 11 5 9 7 6 4 3 penalty: 240 280 290 480 5240 5240 5240 5240 \\_SB_.LNKB (references 1, priority 2781): interrupts: 10 11 5 9 7 6 4 3 penalty: 240 280 290 480 5240 5240 5240 5240 pcib0: slot 29 INTD routed to irq 11 via \\_SB_.LNKH found-> vendor=0x8086, dev=0x24cd, revid=0x01 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x2448, revid=0x81 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001860, size 4, enabled found-> vendor=0x8086, dev=0x24ca, revid=0x01 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00001880, size 5, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB) pcib0: possible interrupts: 3 4 5 6 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.LNKB (references 1, priority 2850): interrupts: 10 11 5 9 7 6 4 3 penalty: 300 350 350 600 5300 5300 5300 5300 pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=0x8086, dev=0x24c3, revid=0x01 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type 4, range 32, base 00001c00, size 8, enabled map[14]: type 4, range 32, base 000018c0, size 6, enabled map[18]: type 1, range 32, base c0000c00, size 9, enabled map[1c]: type 1, range 32, base c0000800, size 8, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB) pcib0: slot 31 INTB is already routed to irq 11 found-> vendor=0x8086, dev=0x24c5, revid=0x01 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 4, range 32, base 00002000, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB) pcib0: slot 31 INTB is already routed to irq 11 found-> vendor=0x8086, dev=0x24c6, revid=0x01 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 agp0: <Intel 82855 host to AGP bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0 agp0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xd0000000 agp0: allocating GATT for aperture of size 256M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xc0100000-0xc01fffff pcib1: prefetched decode 0xe0000000-0xe7ffffff ACPI PCI link initial configuration: \\_SB_.LNKA irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 1.0.0 \\_SB_.LNKB irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 1.0.1 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base e0000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xe0000000-0xe7ffffff map[14]: type 4, range 32, base 00003000, size 8, enabled pcib1: device (null) requested decoded I/O range 0x3000-0x30ff map[18]: type 1, range 32, base c0100000, size 16, enabled pcib1: device (null) requested decoded memory range 0xc0100000-0xc010ffff pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKA) pcib1: slot 0 INTA is already routed to irq 11 found-> vendor=0x1002, dev=0x4c59, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0387, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ugen0: NT product 0x4d28, rev 1.00/1.00, addr 2 uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 8 pcib2: I/O decode 0x4000-0x8fff pcib2: memory decode 0xc0200000-0xcfffffff pcib2: prefetched decode 0xe8000000-0xefffffff pcib2: Subtractively decoded bridge. ACPI PCI link initial configuration: \\_SB_.LNKA irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.0.0 \\_SB_.LNKB irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.0.1 \\_SB_.LNKC irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.0.2 \\_SB_.LNKA irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.1.0 \\_SB_.LNKC irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.2.0 \\_SB_.LNKD irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.2.1 \\_SB_.LNKA irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.2.2 \\_SB_.LNKB irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.2.3 \\_SB_.LNKC irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.4.0 \\_SB_.LNKD irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.4.1 \\_SB_.LNKA irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.4.2 \\_SB_.LNKB irq*11: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.4.3 \\_SB_.LNKE irq 0: [ 3 4 5 6 7 9 10 11] 11+ low,level,sharable 2.8.0 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base b0000000, size 12, enabled pcib2: device (null) requested decoded memory range 0xb0000000-0xb0000fff pcib2: matched entry for 2.0.INTA (src \\_SB_.LNKA) pcib2: slot 0 INTA is already routed to irq 11 found-> vendor=0x1180, dev=0x0476, revid=0xaa bus=2, slot=0, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base b1000000, size 12, enabled pcib2: device (null) requested decoded memory range 0xb1000000-0xb1000fff pcib2: matched entry for 2.0.INTB (src \\_SB_.LNKB) pcib2: slot 0 INTB is already routed to irq 11 found-> vendor=0x1180, dev=0x0476, revid=0xaa bus=2, slot=0, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base c0202000, size 11, enabled pcib2: device (null) requested decoded memory range 0xc0202000-0xc02027ff pcib2: matched entry for 2.0.INTC (src \\_SB_.LNKC) pcib2: slot 0 INTC is already routed to irq 11 found-> vendor=0x1180, dev=0x0552, revid=0x02 bus=2, slot=0, func=2 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=c, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base c0200000, size 12, enabled pcib2: device (null) requested decoded memory range 0xc0200000-0xc0200fff pcib2: matched entry for 2.2.INTA (src \\_SB_.LNKC) pcib2: slot 2 INTA is already routed to irq 11 found-> vendor=0x8086, dev=0x1043, revid=0x04 bus=2, slot=2, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x22 (8500 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base c0201000, size 12, enabled pcib2: device (null) requested decoded memory range 0xc0201000-0xc0201fff map[14]: type 4, range 32, base 00008000, size 6, enabled pcib2: device (null) requested decoded I/O range 0x8000-0x803f pcib2: matched entry for 2.8.INTA (src \\_SB_.LNKE) pcib2: possible interrupts: 3 4 5 6 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.LNKE (references 1, priority 3111): interrupts: 10 5 11 9 7 6 4 3 penalty: 560 610 620 860 5560 5560 5560 5560 pcib2: slot 8 INTA routed to irq 11 via \\_SB_.LNKE found-> vendor=0x8086, dev=0x103d, revid=0x81 bus=2, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at device 0.0 on pci2 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x04761180 0x02100107 0x060700aa 0x00824000 0x10: 0xb0000000 0x020000dc 0xb0050302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010b 0x40: 0x05321014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x04800001 0x00000000 0x04630464 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x008a0000 0x00000000 0x00f00000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x05321014 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <RF5C476 PCI-CardBus Bridge> mem 0xb1000000-0xb1000fff irq 11 at device 0.1 on pci2 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb1000000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0x04761180 0x02100107 0x060700aa 0x00824000 0x10: 0xb1000000 0x020000dc 0xb0080602 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0700020b 0x40: 0x05321014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x24800000 0x00000000 0x04630464 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x008a0000 0x00000000 0x00f00000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x05321014 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: <Ricoh R5C552> mem 0xc0202000-0xc02027ff irq 11 at device 0.2 on pci2 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xc0202000 fwohci0: [MPSAFE] fwohci0: OHCI version 1.0 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:06:1b:03:29:00:97:cd fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci2: <network> at device 2.0 (no driver attached) fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x8000-0x803f mem 0xc0201000-0xc0201fff irq 11 at device 8.0 on pci2 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0201000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 103d 1014 0522 0081 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:0d:60:cb:51:dc fxp0: [MPSAFE] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1860 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1-master: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x0 ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) pci0: <simple comms> at device 31.6 (no driver attached) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 unknown: not probed (disabled) unknown: not probed (disabled) acpi_cmbat0: <Control Method Battery> on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) acpi_acad0: <AC Adapter> on acpi0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xdc000-0xdffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83 b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 e7 73 4f 4f 97 52 83 b4 1f 00 4f 0d 0e 00 00 07 80 91 87 8f 28 1f 8f b5 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sio0 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0 sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1498734295 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_cmbat0: battery initialization start acpi_ec0: info: new max delay is 270 us acpi_cmbat0: battery initialization done, tried 1 times acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on Intel ICH4 chip ata0-master: setting UDMA100 on Intel ICH4 chip ad0: <FUJITSU MHT2040AT/8423> ATA-6 disk at ata0-master ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/74/63 s:63 l:20487537 [1] f:00 typ:12 s(CHS):1023/255/63 e(CHS):1023/194/63 s:20487600 l:37149840 [2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:57637440 l:20502720 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 10489618944 end 10489651199 GEOM: Configure ad0s2, start 10489651200 length 19020718080 end 29510369279 GEOM: Configure ad0s3, start 29510369280 length 10497392640 end 40007761919 GEOM: Configure ad0s3a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s3b, start 268435456 length 1046151168 end 1314586623 GEOM: Configure ad0s3c, start 0 length 10497392640 end 10497392639 GEOM: Configure ad0s3d, start 1314586624 length 268435456 end 1583022079 GEOM: Configure ad0s3e, start 1583022080 length 268435456 end 1851457535 GEOM: Configure ad0s3f, start 1851457536 length 8645935104 end 10497392639 Mounting root from ufs:/dev/ad0s3a start_init: trying /sbin/init splash: image decoder found: blank_saver __________boot -v;__ dmesg______END__________________________ _____________________________________________________________ sysctl hw.acpi _____________________________________________________________ hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 1 hw.acpi.reset_video: 1 hw.acpi.cpu.throttle_max: 8 hw.acpi.cpu.throttle_state: 8 hw.acpi.cpu.cx_supported: C1/1 C2/1 C3/85 hw.acpi.cpu.cx_lowest: C3 hw.acpi.cpu.cx_usage: 0.00% 100.00% 0.00% hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.tz0.temperature: 3282 hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 3587 hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 3642 hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.battery.life: 100 hw.acpi.battery.time: -1 hw.acpi.battery.state: 0 hw.acpi.battery.units: 1 hw.acpi.battery.info_expire: 5 hw.acpi.acline: 1 _____________hw.acpi_______END__________________ __________________________ ASL: http://w3studi.informatik.uni-stuttgart.de/~lintn/temp/easy-ibmTPX31.asl _________________________ ______END_____REPORT____
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200502232242.j1NMgq37027872>