Date: Wed, 24 Jun 1998 03:38:53 -0700 (PDT) From: max@cca.usart.ru To: freebsd-gnats-submit@FreeBSD.ORG Subject: kern/7044: WaveLAN (2.4G, ISA, full-length board) cames UP but not RUNNING Message-ID: <199806241038.DAA28903@hub.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 7044
>Category: kern
>Synopsis: WaveLAN (2.4G, ISA, full-length board) cames UP but not RUNNING
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Jun 24 03:40:01 PDT 1998
>Last-Modified:
>Originator: Max Gotlib
>Organization:
Urals State Academy Of Railway Transport
>Release: 2.2.5-3.0
>Environment:
FreeBSD stoodg.cca.usart.ru 2.2.5-RELEASE FreeBSD 2.2.5-RELEASE #0: Mon Oct 27 19:19:56 ES 1997 root@stoodg.cca.usart.ru:/usr/src/sys/compile/STOODG i386
>Description:
With full-length, 2.4G, ISA WaveLAN (Lucent Tech.) board, the wl0
interface cames UP but not RUNNING during ifconfig. With WLDEBUG turned
on, the following diagnostics appears:
wl0: entered wlioctl()
wl0: entered wlinit()
wl0: enterd wlhwrst() <- the trouble begins here
wl0: DCE_STATUS: 0x0, Correct NWID's: 0, Wrong NWID's: 0
THR_PRESET: 0xc0, SIGNAL_LVL: 64, SILENCE_LVL: 64
SIGNQUAL: 0x75, NETW_ID: fe:0, DES: 254 <- it's not mine NETWID, nor mine
counterpart's, more - there are no DES
encription chips installed !!!
wl0: doing wlack()
wl0: entered wldiag()
wl0: wldiag() failed: status=0; inw=0; outw=e0a0
scb_status 8200
scb_command 0
scb_cbl 1608
cu_cmd 8007
<- THE FINAL BOOH !
wl0: wlintr() called
Without WLDEBUG turned on, only
wl0: init(): trouble resetting board
appears.
>How-To-Repeat:
cd /sys/i386/conf
cp LINT WL; vi WL; config WL
cd ../../compile/WL
make depend; make; make install
shutdown -r now
turn the power off; inslatt the WaveLAN board; turn power on
ifconfig wl0 inet XXX.XXX.XXX.XXX netmask XXX.XXX.XXX.XXX
:)
>Fix:
In the /sys/i386/include/if_wl_wavelan.h (sibce NtwID is 2-byte value):
- #define WLPSA_NWIDENABLE 0x24
- #define WLPSA_SECURITY 0x25
- #define WLPSA_DESKEY 0x26
+ #define WLPSA_NWIDENABLE 0x25
+ #define WLPSA_SECURITY 0x26
+ #define WLPSA_DESKEY 0x27
In file /sys/i386/isa/if_wl.c:
in function "int wlhwrst(int unit)" just at the beginning :
/* clear reset command and set PIO#1 in autoincrement mode */
sc->hacr = HACR_DEFAULT;
CMD(unit);
+ wlinitmmc(unit);
#ifdef WLDEBUG
if (sc->wl_if.if_flags & IFF_DEBUG)
wlmmcstat(unit); /* Display MMC registers */
#endif WLDEBUG
and in function "static int wlconfig(int unit)" just before the return:
if(wlcmd(unit, "config()-address") == 0)
return(0);
- wlinitmmc(unit);
return(1);
}
So the jist is: during the attachment of the isa device procedure
the MMC unit is initialized (OK), then, during initialization of the
wl0 inteface (wlinit()) the full hardware reset is performed
and the first unit to be reinitialize is command unit, that (at least
in my board) refuses this attempt until MMC is initialized.
Fix was founded via "instruction by instruction" comparasion
of the command flow in FreeBSD and Linux WaveLAN drivers ...
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199806241038.DAA28903>