From owner-freebsd-hardware Tue Nov 12 00:26:45 1996 Return-Path: owner-hardware Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id AAA01926 for hardware-outgoing; Tue, 12 Nov 1996 00:26:45 -0800 (PST) Received: from hp.com (hp.com [15.255.152.4]) by freefall.freebsd.org (8.7.5/8.7.3) with ESMTP id AAA01845 for ; Tue, 12 Nov 1996 00:26:02 -0800 (PST) Received: from srmail.sr.hp.com by hp.com with ESMTP (1.37.109.16/15.5+ECS 3.3) id AA286517010; Tue, 12 Nov 1996 00:23:30 -0800 Received: from hpnmhjw.sr.hp.com by srmail.sr.hp.com with ESMTP (1.37.109.16/15.5+ECS 3.3) id AA164067009; Tue, 12 Nov 1996 00:23:29 -0800 Received: from mina.sr.hp.com by hpnmhjw.sr.hp.com with SMTP (1.37.109.16/15.5+ECS 3.3) id AA113677008; Tue, 12 Nov 1996 00:23:28 -0800 Message-Id: <199611120823.AA113677008@hpnmhjw.sr.hp.com> To: "Michael L. VanLoon -- HeadCandy.com" Cc: BRETT_GLASS@infoworld.com, Harlan Stenn , rschof@mccomm.nl, freebsd-hardware@FreeBSD.org Subject: Re: After changing to an AHA2940 I can't boot the kernel. Reply-To: darrylo@sr.hp.com In-Reply-To: Your message of "Mon, 11 Nov 1996 23:20:12 PST." <199611120720.XAA01622@MindBender.serv.net> Date: Tue, 12 Nov 1996 00:23:27 -0800 From: Darryl Okahata Sender: owner-hardware@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk Michael L. VanLoon (michaelv@MindBender.serv.net) wrote: > >Most likely problem: the sector mapping on one controller is different from > >that on the other. > > This is theoretically possible. But in the Real World, I have never > seen this happen, juggling drives between a BusLogic BT747s, a BT956c, > an Adaptec 2940UW, and an NCR 53c810. I think I mixed a 1542 in there > a few times, too, but I'm not positive. I've seen it between a 1542CF and an NCR815. The Adaptec used a C/H/S geometry like C/64/32 or C/255/63 (I forget which -- perhaps it depends on the "support disks >1GB" setting?). My NCR815-based controller (a DTC 3130B) appears to use a very different geometry: C1/H1/63, where: H1 = int((disk_size / 63 + 1023) / 1024) C1 = int(disk_size / (63 * H1)) disk_size = total size of disk in sectors With the NCR, my Quantum 4GB Atlas has a geometry of 1017/131/63, and my Quantum Fireball 1280S has a geometry of 1019/39/63. These are quite different from the Adaptec geometries. Do the NCR geometries vary from controller to controller? -- Darryl Okahata Internet: darrylo@sr.hp.com DISCLAIMER: this message is the author's personal opinion and does not constitute the support, opinion, or policy of Hewlett-Packard, or of the little green men that have been following him all day.