From owner-freebsd-questions  Wed Mar 22 06:29:15 1995
Return-Path: questions-owner
Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id GAA05873 for questions-outgoing; Wed, 22 Mar 1995 06:29:15 -0800
Received: from mail.euronet.nl (mail.euronet.nl [193.67.112.150]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id GAA05865 for <questions@freebsd.org>; Wed, 22 Mar 1995 06:29:06 -0800
Received: from p11.euronet.nl (p11.euronet.nl [193.67.112.171]) by mail.euronet.nl (8.6.4.1/A/UX 3.1) with SMTP id PAA18926 for <questions@freebsd.org>; Wed, 22 Mar 1995 15:28:44 +0100
Date: Wed, 22 Mar 1995 15:28:44 +0100
Message-Id: <199503221428.PAA18926@mail.euronet.nl>
X-Sender: jg@mail.euronet.nl
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: questions@FreeBSD.org
From: jg@euronet.nl (Jan_Guldemond)
Subject: interrupt mapping on PCI-bus
X-Mailer: <PC Eudora Version 1.4>
Sender: questions-owner@FreeBSD.org
Precedence: bulk

Hi,

Here a piece of the boot-messages:

FreeBSD 2.1.0-Development #0: Thu Feb  2 05:49:22 PST 1995
    jkh@time.cdrom.com:/usr/src/sys/compile/GENERIC
CPU: Pentium (Pentium-class CPU) 67 MHz  Id = 0x517  Origin = "GenuineIntel"

<CUT>

npx0 on motherboard
npx0: INT 16 interface
pci0: scanning device 0..31, mechanism=1.
pci0:0: vendor=0x1039, device=0x406, class=multimedia [not supported]
	map(10): mem32(80000010)
	map(14): mem64(80000010)
	map(18): mem32(80000018)
	map(1c): mem64(80000018)
	map(20): mem32(80000020)
	map(24): mem64(80000020)
pci0:1: vendor=0x1039, device=0x8, class=old [not supported]
ncr0 <ncr 53c810 scsi> int a (config) not bound on pci0:9
	reg20: virtual=0xf1ebc000 physical=0xc0000000
pci_map_int failed: no int line set.
	interruptless mode: reduced performance.
ncr0: restart (scsi reset).
ncr0 scanning for targets 0..6 (V2 pl4 95/01/27)
ncr0 waiting for scsi devices to settle
ncr0 targ 0 lun 0: type 0(direct) fixed SCSI2
ncr0 targ 0 lun 0: <HP      C2490A-300      4140>
sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
sd0: 2033MB (4165272 total sec), 2630 cyl, 18 head, 87 sec, bytes/sec 512
ncr0 targ 1 lun 0: type 0(direct) fixed SCSI2
ncr0 targ 1 lun 0: <HP      C2235-300       0B19>
sd1: 402MB (825012 total sec), 1574 cyl, 9 head, 58 sec, bytes/sec 512
vga0 <display device> on pci0:10
pci0:13: vendor=0x1095, device=0x640, class=storage [not supported]
pci uses physical addresses from 0xc0000000 to 0xc0001000

I don't understand the messages class=..... (3 times). What does these 
calsses mean, FreeBSD doesn't seem to support these!!

What does the pci_map_int_failed message means??? In the CMOS setup the 
PCI-controller seams to be connected to IRQ9. 

ThankS!