Date: Sat, 28 May 2005 00:16:28 +0200 (CEST) From: Wojciech Puchar <wojtek@tensor.3miasto.net> To: freebsd-questions@freebsd.org Subject: Acer 4151LMI notebook help needed Message-ID: <Pine.NEB.4.62.0505280010520.22135@chylonia.3miasto.net>
next in thread | raw e-mail | index | archive | help
1) mouse is not found. it is recognized as PS/2 mouse by NetBSD
2.0 live CD, Linux 2.4 (Knoppix tested), Windows XP.
with FreeBSD (5.4) it isn't recognized at all
2) kernel boots at all when selecting "2 - ACPI enabled" from boot menu.
default boot reboots just after starting kernel. anyway LOTS of errors
goes when booting
3) Novatel Wireless Merlin U530 (UMTS/GPRS) PCMCIA module doesn't
work. it isn't attached at all. with linux it's detected as serial port
and then pppd/chat combination works perfect to connect to internet (by GSM
operator).
thank you for any help Wojtek
PS. 3 DVD's from full mirror already done and works fine. wasn't that
difficult :)
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <STUPID MAPIC_00>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.60GHz (1596.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 536735744 (511 MB)
avail memory = 515563520 (491 MB)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INSYDE RSDT_000> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_ec0: <Embedded Controller: GPE 0x1d> port 0x66,0x62 on acpi0
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc19bea00), AE_NO_HARDWARE_RESPONSE
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc19bea00), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc19be8e0), AE_NO_HARDWARE_RESPONSE
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc19be8e0), AE_NO_HARDWARE_RESPONSE
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (4 Cx states)> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1200-0x121f irq 23 at device 29.0 on pci0
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1220-0x123f irq 19 at device 29.1 on pci0
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1240-0x125f irq 18 at device 29.2 on pci0
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1260-0x127f irq 16 at device 29.3 on pci0
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem 0xb0008000-0xb000bfff,0xb0004000-0xb00047ff irq 20 at device 0.0 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3f:53:71:40:00:e9
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3f:40:00:e9
fwe0: Ethernet address: 02:02:3f:40:00:e9
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xb0002000-0xb0003fff irq 21 at device 1.0 on pci2
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:0f:b0:61:0a:8b
pci2: <network> at device 2.0 (no driver attached)
cbb0: <PCI-CardBus Bridge> at device 4.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci2: <memory, flash> at device 4.1 (no driver attached)
pci2: <base peripheral> at device 4.2 (no driver attached)
pci2: <memory, flash> at device 4.3 (no driver attached)
pci2: <memory, flash> at device 4.4 (no driver attached)
pci0: <multimedia, audio> at device 30.2 (no driver attached)
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 0x1100-0x110f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc19bea00), AE_NO_HARDWARE_RESPONSE
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc19bea00), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc19bea00), AE_NO_HARDWARE_RESPONSE
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc19bea00), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc19bea00), AE_NO_HARDWARE_RESPONSE
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc19bea00), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc19bea00), AE_NO_HARDWARE_RESPONSE
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc19bea00), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc19bea00), AE_NO_HARDWARE_RESPONSE
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc19bea00), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc19bea00), AE_NO_HARDWARE_RESPONSE
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc19bea00), AE_NO_HARDWARE_RESPONSE
acpi_cmbat0: <Control Method Battery> on acpi0
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc19bea00), AE_NO_HARDWARE_RESPONSE
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT1._STA] (Node 0xc19bea00), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc19be8e0), AE_NO_HARDWARE_RESPONSE
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc19be8e0), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc19be8e0), AE_NO_HARDWARE_RESPONSE
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc19be8e0), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc19be8e0), AE_NO_HARDWARE_RESPONSE
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc19be8e0), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc19be8e0), AE_NO_HARDWARE_RESPONSE
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc19be8e0), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc19be8e0), AE_NO_HARDWARE_RESPONSE
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc19be8e0), AE_NO_HARDWARE_RESPONSE
ACPI-0501: *** Error: Handler for [EmbeddedControl] returned AE_NO_HARDWARE_RESPONSE
ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc19be8e0), AE_NO_HARDWARE_RESPONSE
ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.BAT2._STA] (Node 0xc19be8e0), AE_NO_HARDWARE_RESPONSE
acpi_cmbat1: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
sio0: configured irq 0 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 0 not in bitmap of probed irqs 0
sio0: port may not be enabled
orm0: <ISA Option ROMs> at iomem 0xe5000-0xe5fff,0xe0000-0xe1fff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: CHICONY Keyboard NT68P81, rev 1.00/0.01, addr 2, iclass 3/1
kbd1 at ukbd0
Timecounter "TSC" frequency 1596011377 Hz quality 800
Timecounters tick every 10.000 msec
Interrupt storm detected on "irq23: uhci0"; throttling interrupt source
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
cbb0: ready never happened, status = 5f
Interrupt storm detected on "irq16: cbb0 uhci3"; throttling interrupt source
ad2: 57231MB <IC25N060ATMR04-0/MO3OAD4A> [116280/16/63] at ata1-master UDMA33
acd0: DVDR <PIONEER DVD-RW DVR-K15RA/1.04> at ata1-slave PIO4
CIS is too long -- truncating
pccard0: Card has no functions!
cbb0: PC Card card activation failed
umass0: Kingston DataTraveler II+, rev 2.00/1.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Kingston DataTraveler II+ 1.13> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 983MB (2014208 512 byte sectors: 64H 32S/T 983C)
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0
umass0: Phase Error, residue = 0
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0
Mounting root from ufs:/dev/ad2s1a
WARNING: / was not properly dismounted
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.NEB.4.62.0505280010520.22135>