Date: Sun, 22 Mar 1998 17:16:37 +0100 From: Michel Munnix <Michel.Munnix@ping.be> To: aic7xxx@FreeBSD.ORG Subject: aic7xxx-5.0.8 boot problem Message-ID: <35153964.6A61510C@ping.be>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------BF6FC700D28A8C3A0BEF1465 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit after installing aic7xxx-5.0.8 (with linux-2.0.33), my computer looped during boot phase with following messages: (scsi0:0:4:0) Device reset, Message buffer in use (scsi-1:-1:-1:-1) 0 commands found and queue for completion SCSI host 0 channel 0 rest (pid 8) timed out - trying harder SCSI bus is being reset for host 0 channel 0 (scsi0:0:4:0) Reset called, scb 29, flags 0x464 .... and so on (i could write down everything if needed) while the previous driver aic7xxx-5.0.7 with the same kernel worked fine. disabling synchonous negotiation for scsi id 4 solved the problem for aic7xxx-5.0.8 but why did it work previously with aic7xxx-5.0.7 ? here is my boot log from aic7xxx-5.0.7 --------------BF6FC700D28A8C3A0BEF1465 Content-Type: text/plain; charset=us-ascii; name="boot1" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="boot1" Loaded 3865 symbols from /boot/System.map. Symbols match kernel version. klogd 1.3-0, log source = /proc/kmsg started. <4>Console: 16 point font, 400 scans <4>Console: colour VGA+ 80x25, 1 virtual console (max 63) <4>pcibios_init : BIOS32 Service Directory structure at 0x000f99e0 <4>pcibios_init : BIOS32 Service Directory entry at 0xf0400 <4>pcibios_init : PCI BIOS revision 2.10 entry at 0xf0430 <4>Probing PCI hardware. <4>Calibrating delay loop.. ok - 45.06 BogoMIPS <4>Memory: 30784k/32768k available (796k kernel code, 384k reserved, 804k data) <6>Swansea University Computer Society NET3.035 for Linux 2.0 <6>NET3: Unix domain sockets 0.13 for Linux NET3.035. <4>Swansea University Computer Society TCP/IP for NET3.034 <4>IP Protocols: ICMP, UDP, TCP <4>Checking 386/387 coupling... Ok, fpu using exception 16 error reporting. <4>Checking 'hlt' instruction... Ok. <6>Intel Pentium with F0 0F bug - workaround enabled. <4>alias mapping IDT readonly ... ... done <4>Linux version 2.0.33 (root@linux) (gcc version 2.7.2.1) #4 Tue Mar 3 23:55:56 MET 1998 <4>Starting kswapd v 1.4.2.2 <6>Serial driver version 4.13 with no serial options enabled <6>tty00 at 0x03f8 (irq = 4) is a 16550A <6>tty01 at 0x02f8 (irq = 3) is a 16550A <6>Logitech bus mouse detected, using IRQ 5. <4>Real Time Clock Driver v1.07 <4>Ramdisk driver initialized : 16 ramdisks of 4096K size <4>loop: registered device at major 7 <4>ide: i82371 PIIX (Triton) on PCI bus 0 function 57 <4> ide0: BM-DMA at 0xe800-0xe807 <4> ide1: BM-DMA at 0xe808-0xe80f <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>md driver 0.35 MAX_MD_DEV=4, MAX_REAL=8 <4>linear personality registered <4>raid0 personality registered <4>aic7xxx: <Adaptec AHA-294X SCSI host adapter> at PCI 11/0 <6>aic7xxx: Loading serial EEPROM...done <6>aic7xxx: Termination (Low ON, High ON) <6>(scsi0) <Adaptec AHA-294X SCSI host adapter> found at PCI 11/0 <6>(scsi0) Narrow Channel, SCSI ID=7, 16/255 SCBs <6>(scsi0) BIOS enabled, IO Port 0xe000, IO Mem 0xdf800000, IRQ 11 <6>(scsi0) Resetting channel <6>(scsi0) Downloading sequencer code... <6>(scsi0) Will download code for option SCB_PAGING <6>(scsi0) Download complete, 406 instructions downloaded <4>Configuring Adaptec (SCSI-ID 7) at IO:330, IRQ 12, DMA priority 5 <4>scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.0.7/3.2.2 <4> <Adaptec AHA-294X SCSI host adapter> <4>scsi1 : Adaptec 1542 <4>scsi : 2 hosts. <6>(scsi0:0:-1:-1) Scanning channel for devices. <6>(scsi0:-1:-1:-1) Allocating initial 30 SCB structures. <6>(scsi0:0:0:0) Synchronous at 10.0MHz, offset 15. <4> Vendor: QUANTUM Model: EMPIRE_1080S Rev: 1240 <4> Type: Direct-Access ANSI SCSI revision: 02 <4>Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 <6>(scsi0:0:1:0) Synchronous at 5.0MHz, offset 7. <4> Vendor: IBM Model: WDS-3200 !J Rev: S550 <4> Type: Direct-Access ANSI SCSI revision: 02 <4>Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0 <6>(scsi0:0:2:0) Synchronous at 10.0MHz, offset 15. <4> Vendor: Quantum Model: XP32150W Rev: L915 <4> Type: Direct-Access ANSI SCSI revision: 02 <4>Detected scsi disk sdc at scsi0, channel 0, id 2, lun 0 <6>(scsi0:0:3:0) Refusing synchronous negotiation; using asynchronous transfers. <4> Vendor: PHILIPS Model: CDD2600 Rev: 1.07 <4> Type: CD-ROM ANSI SCSI revision: 02 <4>Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 <6>(scsi0:0:4:0) Refusing synchronous negotiation; using asynchronous transfers. <4> Vendor: ARCHIVE Model: VIPER 150 21247 Rev: -011 <4> Type: Sequential-Access ANSI SCSI revision: 01 <6>Detected scsi tape st0 at scsi0, channel 0, id 4, lun 0 <6>(scsi0:0:0:0) Enabled tagged queuing, queue depth 16. <6>(scsi0:0:2:0) Enabled tagged queuing, queue depth 16. <6>(scsi0:-1:-1:-1) Allocating 30 additional SCB structures. <4>scsi : detected 1 SCSI tape 1 SCSI cdrom 3 SCSI disks total. <4>SCSI device sda: hdwr sector= 512 bytes. Sectors= 2109376 [1029 MB] [1.0 GB] <4>SCSI device sdb: hdwr sector= 512 bytes. Sectors= 422912 [206 MB] [0.2 GB] Kernel logging (proc) stopped. Kernel log daemon terminating. --------------BF6FC700D28A8C3A0BEF1465-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?35153964.6A61510C>