Date: Fri, 9 May 2008 23:26:55 GMT From: Vinc Barus <vibarus@googlemail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/123563: [re] watchdog timeout Message-ID: <200805092326.m49NQtPM085775@www.freebsd.org> Resent-Message-ID: <200805092330.m49NU4a7005490@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 123563 >Category: i386 >Synopsis: [re] watchdog timeout >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri May 09 23:30:04 UTC 2008 >Closed-Date: >Last-Modified: >Originator: Vinc Barus >Release: 7-STABLE >Organization: >Environment: FreeBSD knirsch 7.0-STABLE FreeBSD 7.0-STABLE #3: Thu Apr 24 13:43:53 CEST 2008 root@knirsch:/usr/obj/usr/src/sys/GENERIC i386 >Description: Can't use re nic on MSI p35 Neo runnig 7-STABLE. re = <RealTek 8168/8111B PCIe Gigabit Ethernet> onboard if_re.c,v 1.95.2.18 2008/04/22 (stable) causes "re0: watchdog timeout" if_re.c,v 1.95.2.3 2007/12/15 (release) causes "re0: watchdog timeout" I used 1.95.2.3 on 7-RELEASE before then I changed to 7-STABLE at 04/24. 1.95.2.3 was only usable with http://people.freebsd.org/~yongari/re/re.HEAD.patch Today i found out that the release version of if_re.c 1.95.2.3 runs well on stable with the patch from last december without changing to an older version of if_rlreg.h (I use the patch only for if_re.c not for if_rlreg.h) verbose dmesg: Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-STABLE #3: Thu Apr 24 13:43:53 CEST 2008 root@hobs:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc163d000. Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc163d188. Preloaded elf module "/boot/kernel/sound.ko" at 0xc163d238. Preloaded elf module "/boot/kernel/acpi_video.ko" at 0xc163d2e4. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc163d394. Preloaded elf module "/boot/modules/nvidia.ko" at 0xc163d440. Preloaded elf module "/boot/kernel/linux.ko" at 0xc163d4ec. Calibrating clock(s) ... i8254 clock: 1193199 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2669686632 Hz CPU: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2669.69-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20000000<LM> AMD Features2=0x1<LAHF> Cores per package: 2 Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 4096 kbytes, 16-way associative, 64 bytes/line real memory = 3220897792 (3071 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001828000 - 0x00000000bc958fff, 3138588672 bytes (766257 pages) avail memory = 3137998848 (2992 MB) Table 'FACP' at 0xbffb0200 Table 'APIC' at 0xbffb0390 MADT: Found table at 0xbffb0390 MP Configuration Table version 1.1 found at 0xc00fc740 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 130 ACPI ID 3: disabled MADT: Found CPU APIC ID 131 ACPI ID 4: disabled ACPI APIC Table: <021908 APIC1538> INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00f0000 bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x31 pnpbios: Found PnP BIOS data at 0xc00f5cb0 pnpbios: Entry = f0000:6d8a Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 ULE: setup cpu group 1 ULE: setup cpu 1 ULE: adding cpu 1 to group 1: cpus 1 mask 0x2 ACPI: RSDP @ 0x0xf9a90/0x0014 (v 0 ACPIAM) ACPI: RSDT @ 0x0xbffb0000/0x0038 (v 1 021908 RSDT1538 0x20080219 MSFT 0x00000097) ACPI: FACP @ 0x0xbffb0200/0x0084 (v 1 021908 FACP1538 0x20080219 MSFT 0x00000097) ACPI: DSDT @ 0x0xbffb0440/0x5564 (v 1 0AAAA 0AAAA000 0x00000000 INTL 0x20051117) ACPI: FACS @ 0x0xbffbe000/0x0040 ACPI: APIC @ 0x0xbffb0390/0x006C (v 1 021908 APIC1538 0x20080219 MSFT 0x00000097) ACPI: MCFG @ 0x0xbffb0400/0x003C (v 1 021908 OEMMCFG 0x20080219 MSFT 0x00000097) ACPI: OEMB @ 0x0xbffbe040/0x0071 (v 1 021908 OEMB1538 0x20080219 MSFT 0x00000097) ACPI: GSCI @ 0x0xbffbe0c0/0x2024 (v 1 021908 GMCHSCI 0x20080219 MSFT 0x00000097) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000 ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 wlan_amrr: <AMRR Transmit Rate Control Algorithm> wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Apr 24 2008 13:43:42) npx0: INT 16 interface acpi0: <021908 RSDT1538> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xdaaa1000 pa 0x1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=29c08086) pcibios: BIOS version 3.00 AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.FHR0 -> bus 0 dev 31 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bff00000 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 5 Validation 0 5 N 0 5 After Disable 0 255 N 0 5 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 14 N 0 3 4 6 7 10 11 12 14 15 Validation 0 14 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 6 7 10 11 12 14 15 Validation 0 11 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 15 N 0 3 4 6 7 10 11 12 14 15 Validation 0 15 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 6 7 10 11 12 14 15 Validation 0 3 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 82a082a0600082a device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 82a082a0600082a device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x29c0, revid=0x02 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x29c1, revid=0x02 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2937, revid=0x02 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0xac00, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2938, revid=0x02 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=15 map[20]: type I/O Port, range 32, base 0xa880, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x293c, revid=0x02 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=14 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf9fffc00, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2940, revid=0x02 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0104, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2948, revid=0x02 domain=0, bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x294a, revid=0x02 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2934, revid=0x02 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 map[20]: type I/O Port, range 32, base 0xa800, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2935, revid=0x02 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0xa480, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2936, revid=0x02 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=14 map[20]: type I/O Port, range 32, base 0xa400, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2939, revid=0x02 domain=0, bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 map[20]: type I/O Port, range 32, base 0xa080, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 found-> vendor=0x8086, dev=0x293a, revid=0x02 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xf9fff800, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0x92 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0105, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2918, revid=0x02 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2921, revid=0x02 domain=0, bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xa000, size 3, enabled map[14]: type I/O Port, range 32, base 0x9c00, size 2, enabled map[18]: type I/O Port, range 32, base 0x9880, size 3, enabled map[1c]: type I/O Port, range 32, base 0x9800, size 2, enabled map[20]: type I/O Port, range 32, base 0x9480, size 4, enabled map[24]: type I/O Port, range 32, base 0x9400, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2930, revid=0x02 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[10]: type Memory, range 64, base 0xf9fff400, size 8, enabled map[20]: type I/O Port, range 32, base 0x400, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2926, revid=0x02 domain=0, bus=0, slot=31, func=5 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x9000, size 3, enabled map[14]: type I/O Port, range 32, base 0x8c00, size 2, enabled map[18]: type I/O Port, range 32, base 0x8880, size 3, enabled map[1c]: type I/O Port, range 32, base 0x8800, size 2, enabled map[20]: type I/O Port, range 32, base 0x8480, size 4, enabled map[24]: type I/O Port, range 32, base 0x8400, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xb000-0xbfff pcib1: memory decode 0xfa000000-0xfe9fffff pcib1: prefetched decode 0xd0000000-0xdfffffff pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P2 - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x0611, revid=0xa2 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfd000000, size 24, enabled pcib1: requested memory range 0xfd000000-0xfdffffff: good map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled pcib1: requested memory range 0xd0000000-0xdfffffff: good map[1c]: type Memory, range 64, base 0xfa000000, size 25, enabled pcib1: requested memory range 0xfa000000-0xfbffffff: good map[24]: type I/O Port, range 32, base 0xbc00, size 7, enabled pcib1: requested I/O range 0xbc00-0xbc7f: in range pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 pcib1: slot 0 INTA is routed to irq 16 nvidia0: <GeForce 8800 GT> port 0xbc00-0xbc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1 nvidia0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xfd000000 nvidia0: Reserved 0x10000000 bytes for rid 0x14 type 3 at 0xd0000000 nvidia0: Reserved 0x2000000 bytes for rid 0x1c type 3 at 0xfa000000 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 nvidia0: [GIANT-LOCKED] nvidia0: [ITHREAD] uhci0: <UHCI (generic) USB controller> port 0xac00-0xac1f irq 16 at device 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xac00 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xa880-0xa89f irq 21 at device 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa880 ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf9fffc00-0xf9ffffff irq 18 at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf9fffc00 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 4 ports with 4 removable, self powered pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x0-0x0 pcib2: no prefetched decode pci2: <ACPI PCI bus> on pcib2 pci2: domain=0, physical bus=2 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xc000-0xcfff pcib3: memory decode 0xfea00000-0xfeafffff pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 found-> vendor=0x11ab, dev=0x6121, revid=0xb2 domain=0, bus=3, slot=0, func=0 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D3 current D0 MSI supports 1 message map[10]: type I/O Port, range 32, base 0xcc00, size 3, enabled pcib3: requested I/O range 0xcc00-0xcc07: in range map[14]: type I/O Port, range 32, base 0xc880, size 2, enabled pcib3: requested I/O range 0xc880-0xc883: in range map[18]: type I/O Port, range 32, base 0xc800, size 3, enabled pcib3: requested I/O range 0xc800-0xc807: in range map[1c]: type I/O Port, range 32, base 0xc480, size 2, enabled pcib3: requested I/O range 0xc480-0xc483: in range map[20]: type I/O Port, range 32, base 0xc400, size 4, enabled pcib3: requested I/O range 0xc400-0xc40f: in range map[24]: type Memory, range 32, base 0xfeaffc00, size 10, enabled pcib3: requested memory range 0xfeaffc00-0xfeafffff: good pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 16 atapci0: <Marvell ATA controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci3 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc400 atapci0: [MPSAFE] atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcc00 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc880 ata2: reset tp1 mask=03 ostat0=50 ostat1=50 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata2: reset tp2 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER> ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc800 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc480 ata3: reset tp1 mask=03 ostat0=7f ostat1=7f ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff ata3: reset tp2 stat0=ff stat1=ff devices=0x0 ata3: [MPSAFE] ata3: [ITHREAD] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xd000-0xdfff pcib4: memory decode 0xfeb00000-0xfebfffff pcib4: no prefetched decode pci4: <ACPI PCI bus> on pcib4 pci4: domain=0, physical bus=4 found-> vendor=0x10ec, dev=0x8168, revid=0x01 domain=0, bus=4, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type I/O Port, range 32, base 0xd800, size 8, enabled pcib4: requested I/O range 0xd800-0xd8ff: in range map[18]: type Memory, range 64, base 0xfebff000, size 12, enabled pcib4: requested memory range 0xfebff000-0xfebfffff: good pcib4: matched entry for 4.0.INTA pcib4: slot 0 INTA hardwired to IRQ 17 re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfebff000-0xfebfffff irq 17 at device 0.0 on pci4 re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800 re0: MSI count : 2 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: bpf attached re0: Ethernet address: 00:19:db:cd:a3:46 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 52 re0: [MPSAFE] re0: [FILTER] uhci2: <UHCI (generic) USB controller> port 0xa800-0xa81f irq 23 at device 29.0 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa800 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 53 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb3: <UHCI (generic) USB controller> on uhci2 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0xa480-0xa49f irq 19 at device 29.1 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa480 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 54 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: <UHCI (generic) USB controller> on uhci3 usb4: USB revision 1.0 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: <UHCI (generic) USB controller> port 0xa400-0xa41f irq 18 at device 29.2 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa400 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 uhub5: 2 ports with 2 removable, self powered uhci5: <UHCI (generic) USB controller> port 0xa080-0xa09f irq 16 at device 29.3 on pci0 uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xa080 uhci5: [GIANT-LOCKED] uhci5: [ITHREAD] usb6: <UHCI (generic) USB controller> on uhci5 usb6: USB revision 1.0 uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 uhub6: 2 ports with 2 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf9fff800-0xf9fffbff irq 23 at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf9fff800 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb7: EHCI version 1.0 usb7: companion controllers, 2 ports each: usb3 usb4 usb5 usb6 usb7: <EHCI (generic) USB 2.0 controller> on ehci1 usb7: USB revision 2.0 uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7 uhub7: 8 ports with 8 removable, self powered pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib5: domain 0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0xe000-0xefff pcib5: no prefetched decode pcib5: Subtractively decoded bridge. pci5: <ACPI PCI bus> on pcib5 pci5: domain=0, physical bus=5 found-> vendor=0x1102, dev=0x0002, revid=0x08 domain=0, bus=5, slot=1, func=0 class=04-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns) intpin=a, irq=5 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xec00, size 5, enabled pcib5: requested I/O range 0xec00-0xec1f: in range pcib5: matched entry for 5.1.INTA pcib5: slot 1 INTA hardwired to IRQ 17 found-> vendor=0x1102, dev=0x7002, revid=0x08 domain=0, bus=5, slot=1, func=1 class=09-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0xe880, size 3, enabled pcib5: requested I/O range 0xe880-0xe887: in range pcm0: <Creative EMU10K1> port 0xec00-0xec1f irq 17 at device 1.0 on pci5 pcm0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xec00 emu: setmap (1edb000, 800), nseg=1, error=0 emu: setmap (1edc000, 1000), nseg=1, error=0 pcm0: <TriTech TR28602 AC97 Codec (id = 0x54524123)> pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: clone manager: deadline=750ms flags=0x8000001e emu: setmap (1ee9000, 1000), nseg=1, error=0 emu: setmap (1eea000, 1000), nseg=1, error=0 emu: setmap (1eeb000, 1000), nseg=1, error=0 emu: setmap (1eec000, 1000), nseg=1, error=0 pcm0: sndbuf_setmap 1eed000, 1000; 0xe726c000 -> 1eed000 pcm0: sndbuf_setmap 1eee000, 1000; 0xe726d000 -> 1eee000 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH9 SATA300 controller> port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 19 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x9480 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0x9400 ata4: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xa000 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x9c00 ata4: reset tp1 mask=03 ostat0=50 ostat1=00 ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata4: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata4: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata4: [MPSAFE] ata4: [ITHREAD] ata5: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x9880 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x9800 ata5: reset tp1 mask=03 ostat0=50 ostat1=00 ata5: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata5: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata5: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata5: [MPSAFE] ata5: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci2: <Intel ICH9 SATA300 controller> port 0x9000-0x9007,0x8c00-0x8c03,0x8880-0x8887,0x8800-0x8803,0x8480-0x848f,0x8400-0x840f irq 19 at device 31.5 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8480 atapci2: [MPSAFE] atapci2: [ITHREAD] atapci2: Reserved 0x10 bytes for rid 0x24 type 4 at 0x8400 ata6: <ATA channel 0> on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9000 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0x8c00 ata6: reset tp1 mask=03 ostat0=7f ostat1=7f ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat1=0x7f err=0xff lsb=0xff msb=0xff ata6: reset tp2 stat0=ff stat1=ff devices=0x0 ata6: [MPSAFE] ata6: [ITHREAD] ata7: <ATA channel 1> on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x8880 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0x8800 ata7: reset tp1 mask=03 ostat0=7f ostat1=7f ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat1=0x7f err=0xff lsb=0xff msb=0xff ata7: reset tp2 stat0=ff stat1=ff devices=0x0 ata7: [MPSAFE] ata7: [ITHREAD] acpi_button0: <Power Button> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55 sio0: [FILTER] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 56 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ahc_isa_probe 8: ioport 0x8c00 alloc failed ahc_isa_probe 9: ioport 0x9c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xcd000-0xcf7ff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 14 (ISA IRQ 14) to vector 57 ata0: [MPSAFE] ata0: [ITHREAD] ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 58 ata1: [MPSAFE] ata1: [ITHREAD] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0xffffffff (1) atkbd: failed to reset the keyboard. kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 59 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0047 psm0: failed to reset the aux device. bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 197959 -> 100000 procfs registered lapic: Divisor 2, Frequency 166855425 hz Timecounter "TSC" frequency 2669686632 Hz quality -100 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached hptrr: no controller detected. ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad8: 239372MB <Maxtor 7V250F0 VA111900> at ata4-master SATA300 ad8: 490234752 sectors [486344C/16H/63S] 16 sectors/interrupt 1 depth queue ad8: Intel check1 failed ad8: Adaptec check1 failed ad8: LSI (v3) check1 failed ad8: LSI (v2) check1 failed ad8: FreeBSD check1 failed ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad10: 239372MB <Maxtor 7V250F0 VA111900> at ata5-master SATA300 ad10: 490234752 sectors [486344C/16H/63S] 16 sectors/interrupt 1 depth queue ad10: Intel check1 failed ad10: Adaptec check1 failed ad10: LSI (v3) check1 failed ad10: LSI (v2) check1 failed ad10: FreeBSD check1 failed ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 6 to local APIC 0 ioapic0: Assigning ISA IRQ 9 to local APIC 1 ioapic0: Assigning ISA IRQ 14 to local APIC 0 ioapic0: Assigning ISA IRQ 15 to local APIC 1 ioapic0: Assigning PCI IRQ 16 to local APIC 0 ioapic0: Assigning PCI IRQ 17 to local APIC 1 ioapic0: Assigning PCI IRQ 18 to local APIC 0 ioapic0: Assigning PCI IRQ 19 to local APIC 1 ioapic0: Assigning PCI IRQ 21 to local APIC 0 ioapic0: Assigning PCI IRQ 23 to local APIC 1 GEOM: new disk ad8 GEOM: new disk ad10 GEOM_LABEL: Label for provider ad8s1 is ext2fs/ext_1. GEOM_LABEL: Label for provider ad8s3 is msdosfs/fbsd. GEOM_LABEL: Label for provider ad10s5 is ext2fs/1_2. Trying to mount root from ufs:/dev/ad8s2a start_init: trying /sbin/init re0: watchdog timeout re0: watchdog timeout re0: watchdog timeout re0: watchdog timeout This is what I see while booting with (stable) if_re.c 1.95.2.18: re0: link state changed to DOWN re0: no link .....re0: link state changed to UP got link re0: link state changed to DOWN DHCPREQUEST on re0 to 255.255.255.255 port 67 re0: link state changed to UP DHCPREQUEST on re0 to 255.255.255.255 port 67 re0: watchdog timeout re0: link state changed to DOWN DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 8 re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 9 re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 11 re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 13 re0: watchdog timeout re0: link state changed to DOWN DHCPOFFER from 192.168.0.1 DHCPREQUEST on re0 to 255.255.255.255 port 67 re0: link state changed to UP DHCPREQUEST on re0 to 255.255.255.255 port 67 re0: watchdog timeout re0: link state changed to DOWN DHCPACK from 192.168.0.1 re0: link state changed to UP re0: watchdog timeout re0: link state changed to DOWN re0: link state changed to UP bound to 192.168.0.4 -- renewal in 3600 seconds. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=399b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_ UCAST,WOL_MCAST,WOL_MAGIC> ether 00:19:db:cd:a3:46 inet 192.168.0.4 netmask 0xffffff00 broadcast 192.168.0.255 media: Ethernet autoselect (1000baseTX <full-duplex>) status: active vmstat -i: interrupt total rate irq1: atkbd0 10 0 irq6: fdc0 10 0 irq16: nvidia0+++ 46 0 irq17: pcm0 re0 3134 18 irq18: ehci0 uhci4 5 0 irq19: uhci3++ 2872 16 irq21: uhci1 396 2 cpu0: timer 337131 1994 cpu1: timer 336954 1993 Total 680558 4026 Is this a known issue? I couldn't find a previous PR for re watchdog timeouts. Regards, Vinc >How-To-Repeat: Install plain 7-STABLE >Fix: Use if_re.c,v 1.95.2.3 with http://people.freebsd.org/~yongari/re/re.HEAD.patch >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200805092326.m49NQtPM085775>