From owner-freebsd-questions Sun Jan 24 18:31:51 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id SAA00101 for freebsd-questions-outgoing; Sun, 24 Jan 1999 18:31:51 -0800 (PST) (envelope-from owner-freebsd-questions@FreeBSD.ORG) Received: from post.mail.demon.net (finch-post-10.mail.demon.net [194.217.242.38]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id SAA29995 for ; Sun, 24 Jan 1999 18:31:47 -0800 (PST) (envelope-from marko@uk.radan.com) Received: from [158.152.75.22] (helo=uk.radan.com) by post.mail.demon.net with smtp (Exim 2.10 #1) id 104boI-0005Sa-00; Mon, 25 Jan 1999 02:31:30 +0000 Organisation: Radan Computational Ltd., Bath, UK. Phone: +44-1225-320320 Fax: +44-1225-320311 Received: from beavis.uk.radan.com (beavis [193.114.228.122]) by uk.radan.com (8.6.10/8.6.10) with SMTP id CAA00639; Mon, 25 Jan 1999 02:31:02 GMT Received: from uk.radan.com (rasnt-1) by beavis.uk.radan.com (4.1/SMI-4.1) id AA01937; Mon, 25 Jan 99 02:30:59 GMT Message-Id: <36ABD743.9D6D646C@uk.radan.com> Date: Mon, 25 Jan 1999 02:30:27 +0000 From: Mark Ovens X-Mailer: Mozilla 4.5 [en] (Win95; I) X-Accept-Language: en-GB Mime-Version: 1.0 To: gkaplan Cc: freebsd-questions@FreeBSD.ORG Subject: Re: PnP modem installation References: <36A8A6BE.329AB17@castle.net> <36A8AAD7.80BC39BB@uk.radan.com> <36ABACD9.494277FE@castle.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG gkaplan wrote: > > additional information: > ( boot time:) > Boot: -c > FreeBSD 2.2.8-RELEASE #2 > config> pnp 2 0 irq0 3 drq0 0 port0 0x2f8 > config> ls > device port irq drq iomem iosize unit flags enabled > ... > sio0 0x3f8 4 -1 0x0 0 0 0x0 yes > sio1 0x2f8 3 -1 0x0 0 1 0x0 yes > sio2 0x3e8 5 -1 0x0 0 2 0x0 no > sio3 0x2e8 9 -1 0x0 0 3 0x0 no > ... > CSN LDN conf en irqs drqs other (PnP devices) > 1 0 os y 3 0 0 0 port 0x2f8 > 2 0 os y 3 0 0 4 port 0x2f8 > config> quit > #dmesg | more > ... > Probing for PnP devices: > CSN 1 Vendor ID YMH0030 [0x3000a865] Serial 0x80860001 > PnP: override config for CSN 1 LDN 0 vend-id 0x3000a865 > CSN 2 Vendor ID USR2090[0x90207256] Serial 0xffff9f80 > PnP: override config for CSN 2 LDN 0 vend-id 0x9027256 > sio4: type 16550A > sio4: siopnp sn 0xffff9f80 at 0x2f8 irq 3drq -1 flags 0x0 id 21 ^^^^^^^^^^^ See sio1 below > Probing for devices on the ISA bus: > ... > sio0: at 0x3f8-0x3ff irq 4 on isa > sio0 type 16650A > sio1 at 0x2f8-0x2ff irq 3 on isa ^^^^^^^^^^^^^^^^^ You seem to have created a conflict. sio1 and your modem (sio4) are both IRQ3 0x2f8. Since sio1 is probed after sio4 I would imagine that sio1 gets the settings. Try either disabling sio1, or changing it's IRQ and address, or changing the modem's IRQ & address. > sio1 type 16550A > ------------ > changed /etc/remote to include the line > usr:dv=dev/cuaa1:br#115200:pa=none: ^^^^^ I haven't set up a modem like this (I use PPP), however I imagine it's similar. cuaa1 is sio0. Your modem is sio4, which is cuaa5. HTH, let me know how you get on. > ------------ > # tip usr > connected > ~. > # tip usr 4044224 # a legitimate phone number > tip: unknown host tip0 > ____________________________________ > > 1.) There is still an inconstancy between my parameter setting and my > hardware assignment. > 2.) When that is cleared up I would first try to communicate with my isp using > a shell account and then a graphical browser > shell ( telnet, or minicom ) graphical browser (? navigator) > ================================ > Patrick Gardella wrote: > > >I'm not a pnp guru, but I'll try to help. > >dmesg is reporting your modem on CSN 2. > >Your pnp command from below is trying to configure CSN 1 (hence pnp 1 0) > > > >The pnp works like this: > >pnp CSN LDN ... > > > >So I would suggest the following (in order): > >1. if your BIOS supports PnP, try the command "pnp 2 0 enable bios" > >2. if that doesn't work, try "pnp 2 0 enable os irq0 3 drq0 0 port0 > >0x2f8" > > > >Also list the devices when you boot using -c. It may make something clear to > > >you (I once had port1 set instead of port0). > > > >No need to modify the sio.c. > > >Patrick > > Mark Ovens wrote: > > > gkaplan wrote: > > > > > > With kernel 2.2.8 , following suggestions in FAQ: " internal PnP > > > modem can't find" I have the following result: > > > -------- from dmsage output: > > > Probe PnP devices > > > CSN 1 Vendor ID YMH0030 [0x3000a865] Serial 0x80860001 > > > CSN 2 Vendor ID USR2090 [0x90207256] Serial 0xffff9f80 > > > CSN 2 is disabled > > > ---------- > > > sio1 configured irq 3 not in bitmap of probed irqs 0 > > > sio1 not found at 0x2f8 > > > ------------ The irq and port address agrees with values reported from > > > win95 i.e., > > > com2 port 2f8 ns16550an > > > Identifier USR2090ISAPNP\USR2090 > > > ------------ > > > I have edited the table siopnp_ids[] in /sys/i386/isa/sio.c to > > > include the line : > > > { 0x9020756, "USR2090"}, . > > > and then rebuilt the kernel. > > > ------------ > > > The FAQ also mentions a pnp command:" you may have to manually > > > configure the PnP device using the 'pnp' command at boot time, with a > > > command like : > > > 'pnp 1 0 enable os irq0 3 drq0 0 port0 0x2f8' > > ^^^ > > I think you will find that this should be ``2 1'' as its Card Select > > Number is 2 and therefore it's Logical Device Number is 1. > > > > > ------- I have tried this, with no noticeable effect. > > > ------- I was told by the modem manufacturer that this modem is an oem > > > product and the the computer's oem is the responsible party of the > > > installation and proper working of the modem. > > > ------- I was told by the computer oem that the modem in question is not > > > a winmodem. > > > > > > ANY SUGGESTIONS? thank you. > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Trust the computer industry to shorten Year 2000 to Y2K. It was this thinking that caused the problem in the first place. My homepage http://www.users.globalnet.co.uk/~markov Mark Ovens, CNC Apps Engineer, | mailto:marko@uk.radan.com Radan Computational Ltd | http://www.radan.com Bath, England. CAD/CAM solutions | FreeBSD - The Power To Serve for the Sheetmetal Work industry.| http://www.freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message