Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 30 May 2004 19:03:06 +0000
From:      Phillip Neumann <phillip@chile.com>
To:        freebsd-mobile@freebsd.org
Subject:   Re: asus M6N
Message-ID:  <1085943786.738.7.camel@book>
In-Reply-To: <1085940899.782.16.camel@book>
References:  <1085940899.782.16.camel@book>

next in thread | previous in thread | raw e-mail | index | archive | help
i forgot... when i boot with acpi, i get this messages:


May 30 18:55:20 book kernel: SearchNode 0xc6942de0 StartNode 0xc6942de0
ReturnNode 0
May 30 18:55:20 book kernel: ACPI-1287: *** Error: Method execution
failed [\_SB_.ECAV] (Node 0xc6942de0), AE_NOT_FOUND
May 30 18:55:20 book kernel: ACPI-1287: *** Error: Method execution
failed [\_SB_.BATS] (Node 0xc6942da0), AE_NOT_FOUND
May 30 18:55:20 book kernel: ACPI-1287: *** Error: Method execution
failed [\_SB_.BAT0._STA] (Node 0xc6947180), AE_NOT_FOUND


and

5).. how would i enable this internet buttonson the keyboard?=20
ive try setting=20

Option "XkbModel"       "microsoftpro"  in my XF86Config, but xev doesnt
see any event when i press the buttons...


thanks you in advance,



El dom, 30-05-2004 a las 18:14, Phillip Neumann escribi=F3:
> hello..
>=20
> Im trying to use my asus m6n notebook, and have some troubles..
>=20
> 1) DRI. ive attached my XF86Config file. my loader.conf contains
> agp_load=3D"YES".=20
>=20
> > glxinfo |grep direct=20
> Xlib:  extension "XFree86-DRI" missing on display ":0.0".
> direct rendering: No
>=20
>=20
> pciconf -lv sais:
>=20
> none3@pci1:0:0: class=3D0x030000 card=3D0x17721043 chip=3D0x4e501002 rev=
=3D0x00
> hdr=3D0x00    vendor   =3D 'ATI Technologies'
>     class    =3D display
>     subclass =3D VGA
>=20
> so i guess there is no driver loaded for the ati 3D, isnit?
>=20
> if i restart X, with the radeon module loaded, there is no dri either.
> The card is an ATI 9600 Mobile. Am i missing something?=20
>=20
>=20
> 2) Battery status. I wish to get the battery status. apm -l sais 255:
>=20
> "If your laptop does not support this function, 255 is displayed"
>=20
> and ACPI:
>=20
> > sysctl hw.acpi.battery
> hw.acpi.battery.life: -1
> hw.acpi.battery.time: -1
> hw.acpi.battery.state: 7
> hw.acpi.battery.units: 2
> hw.acpi.battery.info_expire: 5
>=20
> Is there any other way to get the battery status?
>=20
>=20
> 3) CPU slowdown
> > sysctl hw.acpi.cpu
> hw.acpi.cpu.cx_supported: C2/1
> hw.acpi.cpu.cx_lowest: 0
> hw.acpi.cpu.cx_history: 445828/0
>=20
> Wasnt there a throtteling options in here? how do i change the hz of
> cpu?...=20
>=20
>=20
> 4) DVD, my dvd playing is slow, compared with windows. ive try setting
> this on loader.coonf:
> hw.ata.ata_dma=3D"1"
> hw.ata.atapi_dma=3D"1"
> but the result is the same...  ive test it with mplayer and totem
> (xine?)
>=20
> Is there a special video driver o codec i should use for DVD playback?
>=20
>=20
>=20
> Thank you in advance.
>=20
>=20
>=20
> PD: this is FreeBSD 5.2.1-p8 with X installed form ports.
--=20

------------------------
Phillip Neumann
phillip@chile.com



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1085943786.738.7.camel>