From owner-freebsd-multimedia Sun Feb 4 18:47: 0 2001 Delivered-To: freebsd-multimedia@freebsd.org Received: from mail.localline.com (mail.localline.com [207.13.92.148]) by hub.freebsd.org (Postfix) with ESMTP id 58CB337B69C for ; Sun, 4 Feb 2001 18:46:38 -0800 (PST) Received: from localline.com (as3pool132.localline.com [207.204.118.132]) by mail.localline.com (8.9.3/8.9.3) with ESMTP id VAA30754 for ; Sun, 4 Feb 2001 21:46:33 -0500 Message-ID: <3A7E1409.FA7B74DF@localline.com> Date: Sun, 04 Feb 2001 21:46:33 -0500 From: Charles & Natalie Fultz X-Mailer: Mozilla 4.76 (Macintosh; U; PPC) X-Accept-Language: en,pdf MIME-Version: 1.0 To: freebsd-multimedia@freebsd.org Subject: DRI w/ XFree-4.0.2 and Voodoo3 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-multimedia@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I'm having problems getting DRI support with XFree86-4.0.2 and my 3Dfx Voodoo3 3000 PCI. X works normally but in the log from xinit it says that DRI is disabled. Here is a log file: XFree86 Version 4.0.2 / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 18 December 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Operating System: FreeBSD 4.2-RELEASE i386 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Tue Jan 30 20:19:44 2001 (==) Using config file: "/etc/X11/XF86Config" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (??) unknown. (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "MAG InnoVision 720V2" (**) | |-->Device "3Dfx Voodoo3 3000 PCI" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) XKB: rules: "xfree86" (**) XKB: model: "pc104" (**) XKB: layout: "en_US" (**) XKB: options: "ctrl:swapcaps" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/m isc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:u nscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X1 1R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.0.2, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.0.2, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI:*(0:17:0) 3Dfx Interactive Voodoo3 rev 1, Mem @ 0xfa000000/25, 0xf80000 00/25, I/O @ 0xfc00/8 (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.1.8 (II) Loading /usr/X11R6/lib/modules/drivers/tdfx_drv.o (II) Module tdfx: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 (II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee, 3dfx Voodoo3, 3dfx Voodoo5 (--) Assigning device section with no busID to primary device (--) Chipset 3dfx Voodoo3 found (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.0.2, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 (II) TDFX(0): Softbooting the board (through the int10 interface). (==) TDFX(0): Write-combining range (0xa0000,0x20000) was already clear (==) TDFX(0): Write-combining range (0xf0000,0x10000) (II) TDFX(0): Primary V_BIOS segment is: 0xc000 (II) TDFX(0): Softbooting the board succeeded. (**) TDFX(0): Depth 24, (--) framebuffer bpp 32 (==) TDFX(0): RGB weight 888 (==) TDFX(0): Default visual is TrueColor (--) TDFX(0): Chipset: "3dfx Voodoo3" (--) TDFX(0): Linear framebuffer at 0xF8000000 (--) TDFX(0): MMIO registers at addr 0xFA000000 (--) TDFX(0): PIO registers at addr 0xFC00 (--) TDFX(0): VideoRAM: 16384 kByte Mapping 32768 kByte (==) TDFX(0): Using gamma correction (1.0, 1.0, 1.0) (II) TDFX(0): MAG InnoVision 720V2: Using hsync range of 30.00-70.00 kHz (II) TDFX(0): MAG InnoVision 720V2: Using vrefresh range of 50.00-120.00 Hz (II) TDFX(0): Clock range: 12.00 to 300.00 MHz (--) TDFX(0): Virtual size is 1280x1024 (pitch 1280) (**) TDFX(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz (==) TDFX(0): DPI set to (75, 75) (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.0.2, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.0.2, module version = 1.0.0 (II) TDFX(0): initializing int10 (==) TDFX(0): Write-combining range (0xa0000,0x20000) was already clear (II) TDFX(0): Primary V_BIOS segment is: 0xc000 (II) TDFX(0): VESA BIOS detected (II) TDFX(0): VESA VBE DDC supported (II) TDFX(0): Manufacturer: MAG Model: 7764 Serial#: 572 (II) TDFX(0): Year: 1996 Week: 48 (II) TDFX(0): EDID Version: 1.1 (II) TDFX(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V (II) TDFX(0): Sync: Separate (II) TDFX(0): Max H-Image Size [cm]: horiz.: 33 vert.: 24 (II) TDFX(0): Gamma: 2.70 (II) TDFX(0): DPMS capabilities: Suspend Off; RGB/Color Display (II) TDFX(0): redX: 0.612 redY: 0.353 greenX: 0.293 greenY: 0.595 (II) TDFX(0): blueX: 0.149 blueY: 0.068 whiteX: 0.281 whiteY: 0.311 (II) TDFX(0): Supported VESA Video Modes: (II) TDFX(0): 720x400@70Hz (II) TDFX(0): 640x480@60Hz (II) TDFX(0): 640x480@75Hz (II) TDFX(0): 800x600@60Hz (II) TDFX(0): 800x600@72Hz (II) TDFX(0): 800x600@75Hz (II) TDFX(0): 1024x768@60Hz (II) TDFX(0): 1024x768@70Hz (II) TDFX(0): 1024x768@75Hz (II) TDFX(0): Manufacturer's mask: 0 (II) TDFX(0): Supported Future Video Modes: (II) TDFX(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) TDFX(0): #1: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) TDFX(0): #2: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) TDFX(0): #3: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) TDFX(0): Supported additional Video Mode: (II) TDFX(0): clock: 25.2 MHz Image Size: 300 x 225 mm (II) TDFX(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_borde r: 0 (II) TDFX(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_borde r: 0 (--) Depth 24 pixmap format is 32 bpp (==) TDFX(0): Write-combining range (0xfa000000,0x2000000) was already clear (==) TDFX(0): Write-combining range (0xf8000000,0x2000000) (==) TDFX(0): Write-combining range (0xa0000,0x10000) was already clear (II) TDFX(0): Textures Memory 0.11 MB (EE) TDFX(0): DRI requires Voodoo3 or later, disabling DRI. (II) TDFX(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Dashed Lines Offscreen Pixmaps Driver provided NonTEGlyphRenderer replacement Setting up tile and stipple cache: 10 128x128 slots (==) TDFX(0): Backing store disabled (==) TDFX(0): Silken mouse enabled (II) TDFX(0): direct rendering disabled (**) Mouse1: Protocol: "PS/2" (**) Mouse1: Core Pointer (==) Mouse1: Buttons: 3 (II) Keyboard "Keyboard1" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) (WW) fcntl(7, F_SETOWN): Inappropriate ioctl for device Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list! Any ideas on what needs to be done to get DRI working? Thanks, Charles Fultz To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message