Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 6 Sep 2012 13:46:43 -0700
From:      YongHyeon PYUN <pyunyh@gmail.com>
To:        Jason Wolfe <nitroboost@gmail.com>
Cc:        freebsd-net@freebsd.org, "Eugene M. Zheganin" <emz@norma.perm.ru>
Subject:   Re: Broadcom NetXtreme BCM5719 support
Message-ID:  <20120906204643.GC3160@michelle.cdnetworks.com>
In-Reply-To: <CAAAm0r0h4-9knuxyVZmYHSmkqaaYzYax%2BZCwwikBAKipZynAmQ@mail.gmail.com>
References:  <CAAAm0r2=_VbmHop7WMmg7UW7u0D%2BJGZn2BO1D7E96BFuGPs=8w@mail.gmail.com> <4FFFBA0D.7080505@norma.perm.ru> <CAAAm0r0h4-9knuxyVZmYHSmkqaaYzYax%2BZCwwikBAKipZynAmQ@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jul 25, 2012 at 01:21:05PM -0700, Jason Wolfe wrote:
> On Thu, Jul 12, 2012 at 11:02 PM, Eugene M. Zheganin <emz@norma.perm.ru> wrote:
> > Hi.
> >
> >
> > On 13.07.2012 04:39, Jason Wolfe wrote:
> >>
> >> bge0:<Broadcom unknown BCM5719, ASIC rev 0x5719001>  mem
> >> 0xf6bf0000-0xf6bfffff,0xf6be0000-0xf6beffff,0xf6bd0000-0xf6bdffff irq
> >> 32 at device 0.0 on pci3
> >> bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
> >> miibus0:<MII bus>  on bge0
> >> bge0: Ethernet Address: xx:xx:xx:xx:xx:xx
> >> ...
> >> bge0: watchdog timeout -- resetting
> >> bge0: link state changed to UP
> >> bge0: link state changed to DOWN
> >> bge0: link state changed to UP
> >> bge0: link state changed to DOWN
> >> bge0: link state changed to UP
> >> bge0: link state changed to DOWN
> >> ...
> >>
> >>
> >> bge0@pci:0:3:0:0:       class=0x020000 card=0x169d103c chip=0x165714e4
> >> rev=0x01 hdr=0x00
> >>      vendor      = 'Broadcom Corporation'
> >>      device      = 'NetXtreme BCM5719 Gigabit Ethernet PCIe'
> >>      class       = network
> >>      subclass    = ethernet
> >>
> >> Anything in the pipe on this one, or any access I can provide that
> >> might assist us?
> >>
> > I got a BMC5722 chip (and IBM x3250 mX systems), but same stuff with
> > timeout/resets. I can say 8.1/8.2 were more stable concerning bge(4).
> > You could try to switch off tso and vlanhwtso, at least it did the trick for
> > me (did it ? not sure though. I was having problems one a month on 8.1/8.2,
> > after upgrading to 8.3-STABLE I start having problems with it every day,
> > literally, after ifconfig bge0 -tso -vlanhwtso it's running for 5 day now.)
> >
> > Eugene.
> 
> Yeah, I had no luck even with all options disabled.  The NIC
> constantly bounces, and ifconfig never reports anything but "status:
> no carrier".  No love on the driver side for this NetXtreme BCM5719
> Gigabit Ethernet PCIe card?

See kern/171121. Give latest WIP version spin and let me know how
it goes on your box.

> 
> Jason



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120906204643.GC3160>