Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 11 Apr 2003 16:30:18 -0700 (PDT)
From:      "Derek Young" <DerekYoung@easy.com>
To:        freebsd-ports-bugs@FreeBSD.org
Subject:   Re: ports/50835: cdrtools port uses the config path "/etc/default/cdrecord"
Message-ID:  <200304112330.h3BNUIAZ067850@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help
The following reply was made to PR ports/50835; it has been noted by GNATS.

From: "Derek Young" <DerekYoung@easy.com>
To: freebsd-gnats-submit@freebsd.org, obrien@freebsd.org
Cc: dirk@freebsd.org
Subject: Re: ports/50835: cdrtools port uses the config path "/etc/default/cdrecord"
Date: Fri, 11 Apr 2003 18:20:47 -0600

 Cdrecord wasn't the only utility in there that had that 
 problem.  
  
 Anyway, here are some patches you can use if you want, 
 just copy them into  
 your files directory and you will be good to go. Even the 
 man pages are  
 updated. I moved it all to /usr/local/etc. If you do not like 
 that, change  
 the patches ;) 
  
 Derek Young 
  
 -------------------------------START patch-da 
 *** cdrecord/cdrecord.1.orig    Tue Dec 24 09:28:40 2002 
 --- cdrecord/cdrecord.1 Fri Apr 11 17:04:40 2003 
 *************** 
 *** 146,152 **** 
   described below. 
  
   .PP 
 ! If a file /etc/default/cdrecord exists, the parameter to the 
   .B dev= 
   option may also be a drive name label in said file (see 
 FILES section). 
  
 --- 146,152 ---- 
   described below. 
  
   .PP 
 ! If a file /usr/local/etc/cdrecord exists, the parameter to 
 the 
   .B dev= 
   option may also be a drive name label in said file (see 
 FILES section). 
  
 *************** 
 *** 621,627 **** 
   .B dev= 
   option does not contain the characters ',', '/', '@' or ':', 
   it is interpreted as an label name that may be found in 
 the file 
 ! /etc/default/cdrecord (see FILES section). 
   .TP 
   .BI gracetime= # 
   Set the grace time before starting to write to 
 --- 621,627 ---- 
   .B dev= 
   option does not contain the characters ',', '/', '@' or ':', 
   it is interpreted as an label name that may be found in 
 the file 
 ! /usr/local/etc/cdrecord (see FILES section). 
   .TP 
   .BI gracetime= # 
   Set the grace time before starting to write to 
 *************** 
 *** 1361,1367 **** 
   .TP 
   .B CDR_DEVICE 
   This may either hold a device identifier that is suitable to 
 the open 
 ! call of the SCSI transport library or a label in the file  
 /etc/default/cdrecord. 
   .TP 
   .B CDR_SPEED 
   Sets the default speed value for writing (see also 
 --- 1361,1367 ---- 
   .TP 
   .B CDR_DEVICE 
   This may either hold a device identifier that is suitable to 
 the open 
 ! call of the SCSI transport library or a label in the file  
 /usr/local/etc/cdrecord. 
   .TP 
   .B CDR_SPEED 
   Sets the default speed value for writing (see also 
 *************** 
 *** 1417,1424 **** 
  
   .SH FILES 
   .TP 
 ! /etc/default/cdrecord 
 ! Default values can be set for the following options in  
 /etc/default/cdrecord. 
   For example: 
   .SM CDR_FIFOSIZE=8m 
   or 
 --- 1417,1424 ---- 
  
   .SH FILES 
   .TP 
 ! /usr/local/etc/cdrecord 
 ! Default values can be set for the following options in  
 /usr/local/etc/cdrecord. 
   For example: 
   .SM CDR_FIFOSIZE=8m 
   or 
 *************** 
 *** 1427,1433 **** 
   .TP 
   CDR_DEVICE 
   This may either hold a device identifier that is suitable to 
 the open 
 ! call of the SCSI transport library or a label in the file  
 /etc/default/cdrecord 
   that allows to identify a specific drive on the system. 
   .TP 
   CDR_SPEED 
 --- 1427,1433 ---- 
   .TP 
   CDR_DEVICE 
   This may either hold a device identifier that is suitable to 
 the open 
 ! call of the SCSI transport library or a label in the file  
 /usr/local/etc/cdrecord 
   that allows to identify a specific drive on the system. 
   .TP 
   CDR_SPEED 
  
  
 -------------------------------START patch-db 
 *** cdrecord/defaults.c.orig    Wed Aug 14 12:52:00 2002 
 --- cdrecord/defaults.c Fri Apr 11 17:11:51 2003 
 *************** 
 *** 53,59 **** 
          * don't contribute work and don't give support, they 
 are causing extra 
          * work for me and this way slow down the cdrecord 
 development. 
          */ 
 !       return (defltopen("/etc/default/cdrecord")); 
   } 
  
   EXPORT void 
 --- 53,59 ---- 
          * don't contribute work and don't give support, they 
 are causing extra 
          * work for me and this way slow down the cdrecord 
 development. 
          */ 
 !       return (defltopen("/usr/local/etc/cdrecord")); 
   } 
  
   EXPORT void 
  
  
 -------------------------------START patch-dc 
 *** cdrecord/cdrecord.dfl.orig  Sun Jul  7 16:56:21 2002 
 --- cdrecord/cdrecord.dfl       Fri Apr 11 17:13:58 2003 
 *************** 
 *** 1,6 **** 
   #ident @(#)cdrecord.dfl       1.4 02/07/07 Copyr 1998 J. 
 Schilling 
   # 
 ! # This file is /etc/default/cdrecord 
   # It contains defaults that are used if no command line 
 option 
   # or environment is present. 
   # 
 --- 1,6 ---- 
   #ident @(#)cdrecord.dfl       1.4 02/07/07 Copyr 1998 J. 
 Schilling 
   # 
 ! # This file is /usr/local/etc/cdrecord 
   # It contains defaults that are used if no command line 
 option 
   # or environment is present. 
   # 
 *************** 
 *** 14,20 **** 
   # Note that newer cdrecord versions do not default 
   # to speed=1. For MMC compliant drives, the default 
   # is to write at maximum speed, so it in general does 
 ! # not make sense to set up a default speed in 
 /etc/default/cdrecord 
   # 
   #CDR_SPEED=40 
  
 --- 14,20 ---- 
   # Note that newer cdrecord versions do not default 
   # to speed=1. For MMC compliant drives, the default 
   # is to write at maximum speed, so it in general does 
 ! # not make sense to set up a default speed in 
 /usr/local/etc/cdrecord 
   # 
   #CDR_SPEED=40 
  
  
 -------------------------------START patch-dd 
 *** readcd/readcd.1.orig        Tue Dec 24 09:28:41 2002 
 --- readcd/readcd.1     Fri Apr 11 17:21:57 2003 
 *************** 
 *** 186,192 **** 
   .B dev= 
   option does not contain the characters ',', '/', '@' or ':', 
   it is interpreted as an label name that may be found in 
 the file 
 ! /etc/default/cdrecord (see FILES section). 
   .TP 
   .BI timeout= # 
   Set the default SCSI command timeout value to 
 --- 186,192 ---- 
   .B dev= 
   option does not contain the characters ',', '/', '@' or ':', 
   it is interpreted as an label name that may be found in 
 the file 
 ! /usr/local/etc/cdrecord (see FILES section). 
   .TP 
   .BI timeout= # 
   Set the default SCSI command timeout value to 
  
  
 -------------------------------START patch-de 
 *** scgcheck/scgcheck.1.orig    Tue Dec 24 09:32:01 2002 
 --- scgcheck/scgcheck.1 Fri Apr 11 17:25:25 2003 
 *************** 
 *** 170,176 **** 
   .B dev= 
   option does not contain the characters ',', '/', '@' or ':', 
   it is interpreted as an label name that may be found in 
 the file 
 ! /etc/default/cdrecord (see FILES section). 
   .TP 
   .BI timeout= # 
   Set the default SCSI command timeout value to 
 --- 170,176 ---- 
   .B dev= 
   option does not contain the characters ',', '/', '@' or ':', 
   it is interpreted as an label name that may be found in 
 the file 
 ! /usr/local/etc/cdrecord (see FILES section). 
   .TP 
   .BI timeout= # 
   Set the default SCSI command timeout value to 
  
 -------------------------------START patch-df 
 *** cdda2wav/cdda2ogg.orig      Tue Apr  9 06:18:15 2002 
 --- cdda2wav/cdda2ogg   Fri Apr 11 17:31:24 2003 
 *************** 
 *** 33,39 **** 
  
   FILEPREFIX=${1:-audiotrack} 
  
 ! . /etc/default/cdda2ogg 2>/dev/null || true 
  
   TRACK=1 
   while : 
 --- 33,39 ---- 
  
   FILEPREFIX=${1:-audiotrack} 
  
 ! . /usr/local/etc/cdda2ogg 2>/dev/null || true 
  
   TRACK=1 
   while : 
  
  
 -------------------------------START patch-dg 
 *** include/deflts.h.orig       Mon Aug 26 06:00:36 2002 
 --- include/deflts.h    Fri Apr 11 17:33:00 2003 
 *************** 
 *** 34,40 **** 
   extern "C" { 
   #endif 
  
 ! #define       DEFLT   "/etc/default" 
    
   /* 
    * cmd's to defltcntl() 
 --- 34,40 ---- 
   extern "C" { 
   #endif 
  
 ! #define       DEFLT   "/usr/local/etc" 
    
   /* 
    * cmd's to defltcntl() 
  
 -------------------------------START patch-dh 
 *** rscsi/rscsi.c.orig  Sat Nov 30 05:48:40 2002 
 --- rscsi/rscsi.c       Fri Apr 11 17:34:19 2003 
 *************** 
 *** 132,140 **** 
          * don't contribute work and don't give support, they 
 are causing extra 
          * work for me and this way slow down the 
 development. 
          */ 
 !       if (defltopen("/etc/default/rscsi") < 0) { 
                 rscsierror(geterrno(), errmsgstr(geterrno()), 
 !                       "Remote configuration error: Cannot open 
 /etc/default/rscsi"); 
   /*            rscsirespond(-1, geterrno());*/ 
                 exit(EX_BAD); 
         } 
 --- 132,140 ---- 
          * don't contribute work and don't give support, they 
 are causing extra 
          * work for me and this way slow down the 
 development. 
          */ 
 !       if (defltopen("/usr/local/etc/rscsi") < 0) { 
                 rscsierror(geterrno(), errmsgstr(geterrno()), 
 !                       "Remote configuration error: Cannot open 
 /usr/local/etc/rscsi"); 
   /*            rscsirespond(-1, geterrno());*/ 
                 exit(EX_BAD); 
         } 
  
  
 -------------------------------START patch-di 
 *** rscsi/rscsi.dfl.orig        Mon Nov 13 19:24:03 2000 
 --- rscsi/rscsi.dfl     Fri Apr 11 17:35:22 2003 
 *************** 
 *** 1,6 **** 
   #ident %Z%%M% %I% %E% Copyr 2000 J. Schilling 
   # 
 ! # This file is /etc/default/rscsi 
   # 
   # NOTE: If this file is not present, rscsi will reject to 
 work. 
   # 
 --- 1,6 ---- 
   #ident %Z%%M% %I% %E% Copyr 2000 J. Schilling 
   # 
 ! # This file is /usr/local/etc/rscsi 
   # 
   # NOTE: If this file is not present, rscsi will reject to 
 work. 
   # 
 
 This message was sent from the free private e-mail service by easy.com, the portal site owned by Stelios and the easyGroup. This email service is available to all members of the public to use for personal reasons only.  Not all subscribers to this e-mail service are representatives of an easyGroup company.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200304112330.h3BNUIAZ067850>