From owner-freebsd-current  Thu Aug 21 11:54:10 1997
Return-Path: <owner-freebsd-current>
Received: (from root@localhost)
          by hub.freebsd.org (8.8.5/8.8.5) id LAA12262
          for current-outgoing; Thu, 21 Aug 1997 11:54:10 -0700 (PDT)
Received: from Symbion.srrc.usda.gov (glenn@[199.78.118.118])
          by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id LAA12248
          for <freebsd-current@freebsd.org>; Thu, 21 Aug 1997 11:53:59 -0700 (PDT)
Received: from localhost (glenn@localhost)
	by Symbion.srrc.usda.gov (8.8.6/8.8.6) with SMTP id NAA00376
	for <freebsd-current@freebsd.org>; Thu, 21 Aug 1997 13:51:55 -0500
X-Authentication-Warning: Symbion.srrc.usda.gov: glenn owned process doing -bs
Date: Thu, 21 Aug 1997 13:51:55 -0500 (CDT)
From: Glenn Johnson <glenn@srrc.usda.gov>
Reply-To: Glenn Johnson <gjohnson@nola.srrc.usda.gov>
To: freebsd-current@freebsd.org
Subject: NCR SCSI will not boot
Message-ID: <Pine.LNX.3.96.970821132915.124A-100000@Symbion.srrc.usda.gov>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-freebsd-current@freebsd.org
X-Loop: FreeBSD.org
Precedence: bulk

I can not boot my NCR SCSI equipped computer. I tried 3.0 snapshots of
8-7-97 and 8-15-97. In each case I get to the following point upon bootup:

ncr0: <ncr 53c825a fast10 wide scsi> rev 0x11 int a irq 11 on pci0.14.0
ncr0: minsync=25, maxsync=206, maxoffs=8, 128 dwords burst, large dma fifo

It then hangs at this point. I then tried a 2.2.2 release floppy and it 
booted fine. So it is just a problem on -current, which I need for
SMP. Here is some hardware info:

  Motherboard: Tyan Titan Pro AT, dual 200-MHz PPro processors installed.
  SCSI board: ? S1365
  Hard disk: Quantum XP34300W; Rev - L912
  CD-ROM: Toshiba CD-ROM XM-3701TA; Rev - 0236

Is there an option that can be added to the kernel config to work around
this? Thanks.

Glenn Johnson
USDA-ARS-SRRC
Phone: (504) 286-4252
FAX: (504) 286-4217
gjohnson@nola.srrc.usda.gov