From owner-freebsd-hackers@FreeBSD.ORG Sat Oct 18 21:03:47 2014 Return-Path: Delivered-To: freebsd-hackers@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id 34B66960; Sat, 18 Oct 2014 21:03:47 +0000 (UTC) Received: from puchar.net (puchar.net [188.252.31.250]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client CN "puchar.net", Issuer "puchar.net" (not verified)) by mx1.freebsd.org (Postfix) with ESMTPS id AACD3B85; Sat, 18 Oct 2014 21:03:46 +0000 (UTC) Received: Received: from 127.0.0.1 (localhost [127.0.0.1]) by puchar.net (8.14.9/8.14.9) with ESMTP id s9IL3gYW051800; Sat, 18 Oct 2014 23:03:42 +0200 (CEST) (envelope-from wojtek@puchar.net) Date: Sat, 18 Oct 2014 23:03:38 +0200 (CEST) From: Wojciech Puchar X-X-Sender: wojtek@laptop To: Adrian Chadd Subject: Re: help with backlight control and memory In-Reply-To: Message-ID: References: User-Agent: Alpine 2.11 (BSF 23 2013-08-11) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.4.3 (puchar.net [10.0.1.1]); Sat, 18 Oct 2014 23:03:42 +0200 (CEST) Cc: "freebsd-hackers@freebsd.org" X-BeenThere: freebsd-hackers@freebsd.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: Technical Discussions relating to FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 18 Oct 2014 21:03:47 -0000 tried. jsut after kernel is loaded backlight control keys stops working. tried loading every acpi_* kernel module that is available, with no results On Thu, 16 Oct 2014, Adrian Chadd wrote: > Hi! > > Please try the latest FreeBSD-11 snapshot and see if it still works > once you've started Xorg. > > > -a > > > On 16 October 2014 05:19, Wojciech Puchar wrote: >> bought new laptop. it's lenovo B590 >> >> most things works fine. but brightness control keys doesn't work after >> FreeBSD is loaded. they work before it. >> >> i don't ask for a solution but any point to start. What should i check? >> >> is it ACPI tables problem (kernel shows some errors). >> >> Other question - can amount of memory dedicated to GFX card be changed? >> There is no option in BIOS setup to do this. and i have lots of memory >> wasted as you may see below. >> >> >> >> Copyright (c) 1992-2014 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 10.1-BETA1 #4: Wed Oct 15 23:56:56 CEST 2014 >> root@laptop:/usr/src/sys/amd64/compile/laptop amd64 >> FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 >> CPU: Intel(R) Celeron(R) CPU 1005M @ 1.90GHz (1895.73-MHz K8-class CPU) >> Origin = "GenuineIntel" Id = 0x306a9 Family = 0x6 Model = 0x3a >> Stepping = 9 >> >> Features=0xbfebfbff >> >> Features2=0xdbae3bf >> AMD Features=0x28100800 >> AMD Features2=0x1 >> Structured Extended Features=0x281 >> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID >> TSC: P-state invariant, performance statistics >> real memory = 2147483648 (2048 MB) >> avail memory = 1585037312 (1511 MB) >> Event timer "LAPIC" quality 600 >> ACPI APIC Table: >> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >> FreeBSD/SMP: 1 package(s) x 2 core(s) >> cpu0 (BSP): APIC ID: 0 >> cpu1 (AP): APIC ID: 2 >> ioapic0 irqs 0-23 on motherboard >> random: initialized >> iscsi: version 2.3.1 >> kbd1 at kbdmux0 >> cryptosoft0: on motherboard >> acpi0: on motherboard >> ACPI Error: No handler for Region [ECOR] (0xfffff80001710400) >> [EmbeddedControl] (20130823/evregion-178) >> ACPI Error: Region EmbeddedControl (ID=3) has no handler >> (20130823/exfldio-320) >> ACPI Error: Method parse/execution failed [\134_SB_.PCI0.LPCB.H_EC._REG] >> (Node 0xfffff8000171e200), AE_NOT_EXIST (20130823/psparse-553) >> acpi0: Power Button (fixed) >> cpu0: on acpi0 >> cpu1: on acpi0 >> hpet0: iomem 0xfed00000-0xfed003ff on acpi0 >> Timecounter "HPET" frequency 14318180 Hz quality 950 >> Event timer "HPET" frequency 14318180 Hz quality 550 >> Event timer "HPET1" frequency 14318180 Hz quality 440 >> Event timer "HPET2" frequency 14318180 Hz quality 440 >> Event timer "HPET3" frequency 14318180 Hz quality 440 >> Event timer "HPET4" frequency 14318180 Hz quality 440 >> Event timer "HPET5" frequency 14318180 Hz quality 440 >> Event timer "HPET6" frequency 14318180 Hz quality 440 >> atrtc0: port 0x70-0x77 irq 8 on acpi0 >> atrtc0: Warning: Couldn't map I/O. >> Event timer "RTC" frequency 32768 Hz quality 0 >> attimer0: port 0x40-0x43,0x50-0x53 irq 0 on acpi0 >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> Event timer "i8254" frequency 1193182 Hz quality 100 >> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 >> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 >> acpi_ec0: port 0x62,0x66 on acpi0 >> pcib0: port 0xcf8-0xcff on acpi0 >> pci0: on pcib0 >> vgapci0: port 0x3000-0x303f mem >> 0x90000000-0x903fffff,0x80000000-0x8fffffff irq 16 at device 2.0 on pci0 >> agp0: on vgapci0 >> agp0: aperture size is 256M, detected 32764k stolen memory >> vgapci0: Boot video device >> xhci0: mem 0x90600000-0x9060ffff >> irq 21 at device 20.0 on pci0 >> xhci0: 32 byte context size. >> xhci0: Port routing mask set to 0xffffffff >> usbus0 on xhci0 >> pci0: at device 22.0 (no driver attached) >> ehci0: mem 0x9061a000-0x9061a3ff >> irq 16 at device 26.0 on pci0 >> usbus1: EHCI version 1.0 >> usbus1 on ehci0 >> hdac0: mem 0x90610000-0x90613fff irq 22 >> at device 27.0 on pci0 >> pcib1: irq 16 at device 28.0 on pci0 >> pci1: on pcib1 >> pcib2: irq 17 at device 28.1 on pci0 >> pci2: on pcib2 >> pci2: at device 0.0 (no driver attached) >> pcib3: irq 19 at device 28.3 on pci0 >> pci3: on pcib3 >> re0: port >> 0x2000-0x20ff mem 0x90404000-0x90404fff,0x90400000-0x90403fff irq 19 at >> device 0.0 on pci3 >> re0: Using 1 MSI-X message >> re0: ASPM disabled >> re0: Chip rev. 0x2c800000 >> re0: MAC rev. 0x00100000 >> miibus0: on re0 >> ukphy0: PHY 1 on miibus0 >> ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, >> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow >> re0: Ethernet address: 54:ee:75:13:f2:6b >> ehci1: mem 0x90619000-0x906193ff >> irq 23 at device 29.0 on pci0 >> usbus2: EHCI version 1.0 >> usbus2 on ehci1 >> isab0: at device 31.0 on pci0 >> isa0: on isab0 >> ahci0: port >> 0x3088-0x308f,0x3094-0x3097,0x3080-0x3087,0x3090-0x3093,0x3060-0x307f mem >> 0x90618000-0x906187ff irq 19 at device 31.2 on pci0 >> ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported >> ahcich0: at channel 0 on ahci0 >> ahcich4: at channel 4 on ahci0 >> ahciem0: on ahci0 >> acpi_acad0: on acpi0 >> acpi_lid0: on acpi0 >> acpi_button0: on acpi0 >> acpi_tz0: on acpi0 >> acpi_tz1: on acpi0 >> atkbdc0: port 0x60,0x64 irq 1 on acpi0 >> atkbd0: irq 1 on atkbdc0 >> kbd0 at atkbd0 >> atkbd0: [GIANT-LOCKED] >> psm0: irq 12 on atkbdc0 >> psm0: [GIANT-LOCKED] >> psm0: model Generic PS/2 mouse, device ID 0 >> battery0: on acpi0 >> acpi_ibm0: on acpi0 >> orm0: at iomem 0xc0000-0xcefff on isa0 >> sc0: at flags 0x100 on isa0 >> sc0: VGA <16 virtual consoles, flags=0x300> >> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >> est0: on cpu0 >> p4tcc0: on cpu0 >> est1: on cpu1 >> p4tcc1: on cpu1 >> fuse-freebsd: version 0.4.4, FUSE ABI 7.8 >> Timecounters tick every 1.000 msec >> ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, >> logging disabled >> DUMMYNET 0 with IPv6 initialized (100409) >> load_dn_sched dn_sched RR loaded >> load_dn_sched dn_sched WF2Q+ loaded >> load_dn_sched dn_sched FIFO loaded >> load_dn_sched dn_sched PRIO loaded >> load_dn_sched dn_sched QFQ loaded >> hdacc0: at cad 0 on hdac0 >> hdaa0: at nid 1 on hdacc0 >> pcm0: at nid 20,21 and 24,25 on hdaa0 >> hdacc1: at cad 3 on hdac0 >> hdaa1: at nid 1 on hdacc1 >> pcm1: at nid 5 on hdaa1 >> random: unblocking device. >> usbus0: 5.0Gbps Super Speed USB v3.0 >> usbus1: 480Mbps High Speed USB v2.0 >> usbus2: 480Mbps High Speed USB v2.0 >> ACPI Error: No handler for Region [ECRM] (0xfffff800017dd180) >> [EmbeddedControl] (20130823/evregion-178) >> ACPI Error: Region EmbeddedControl (ID=3) has no handler >> (20130823/exfldio-320) >> ACPI Error: Method parse/execution failed [\134_TZ_.MDEC] (Node >> 0xfffff80001725b40), AE_NOT_EXIST (20130823/psparse-553) >> ACPI Error: Method parse/execution failed [\134_TZ_.TZS0._SCP] (Node >> 0xfffff80001725a40), AE_NOT_EXIST (20130823/psparse-553) >> ugen2.1: at usbus2 >> uhub0: on usbus2 >> ugen1.1: at usbus1 >> ugen0.1: <0x8086> at usbus0 >> uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 >> uhub2: on usbus1 >> ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 >> ses0: SEMB S-E-S 2.00 device >> ses0: SEMB SES Device >> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 >> ada0: ATA-8 SATA 2.x device >> ada0: Serial Number WD-WXL1EB3KUNR5 >> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) >> ada0: Command Queueing enabled >> cd0 at ahcich4 bus 0 scbus1 target 0 lun 0 >> cd0: Removable CD-ROM SCSI-0 device cd0: Serial >> Number KW9E4571958 >> cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes) >> cd0: Attempt to query device size failed: NOT READY, Medium not present - >> tray closed >> ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C) >> ada0: quirks=0x1<4K> >> ada0: Previously was known as ad0 >> Enter passphrase for ada0d: SMP: AP CPU #1 Launched! >> hwpmc: SOFT/16/64/0x67 TSC/1/64/0x20 >> IAP/8/48/0x3ff >> IAF/3/48/0x67 >> Timecounter "TSC" frequency 1895731156 Hz quality 1000 >> uhub1: 8 ports with 8 removable, self powered >> uhub0: 3 ports with 3 removable, self powered >> uhub2: 3 ports with 3 removable, self powered >> ugen2.2: at usbus2 >> uhub3: on >> usbus2 >> ugen1.2: at usbus1 >> uhub4: on >> usbus1 >> uhub3: 4 ports with 4 removable, self powered >> uhub4: 4 ports with 4 removable, self powered >> ugen1.3: at usbus1 >> ugen1.4: at usbus1 >> umass0: >> on usbus1 >> da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 >> da0: Removable Direct Access SCSI-0 device da0: >> Serial Number 058F63666435 >> da0: 40.000MB/s transfers >> da0: Attempt to query device size failed: NOT READY, Medium not present >> da0: quirks=0x2 >> ugen1.5: at usbus1 >> GEOM_ELI: Device ada0d.eli created. >> GEOM_ELI: Encryption: AES-CBC 128 >> GEOM_ELI: Crypto: software >> Trying to mount root from ufs:ada0d.eli []... >> _______________________________________________ >> freebsd-hackers@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers >> To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org" > >