Date: Wed, 3 May 2006 11:46:21 +0200 From: Peter Klett <peter@netkey.at> To: Darren Pilgrim <darren.pilgrim@bitfreak.org> Cc: freebsd-current@freebsd.org Subject: Re: DRI seems to bee broken Message-ID: <200605031146.22340.peter@netkey.at> In-Reply-To: <445803AE.2050700@bitfreak.org> References: <200605021610.12599.peter@netkey.at> <200605030251.43979.peter@netkey.at> <445803AE.2050700@bitfreak.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--Boundary-00=_uvHWEZ49B9wtnhP Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline On Wednesday 03 May 2006 03:13, Darren Pilgrim wrote: > Did you go through the entire source upgrade process? The entire > upgrade process being: > > 1: cvsup src # cd /usr/src # make update > 2: Read UPDATING and do any extra steps it may indicate. not really I must confess, as you can see in my make.conf, I still haven't put the NO_XXX in src.conf (and translated them to WITHOUT_XXX knobs) The lastest entry in my UPDATING is from 20060317. > 3: Verify that your kernel config is still correct. Hoped that, how can I verify that ? > 4: /usr/src/usr.sbin/mergemaster/mergemaster.sh -p > 5: make buildworld > 6: make buildkernel > 7: make installkernel > 8: reboot to single user mode > 9: make installworld > 10: mergemaster > 11: reboot Actually I rebooted into single user mode, after make upate, then # make buildworld # make kernel # mergemaster -p (probably in /usr/sbin) # make installworld # mergemaster # reboot > dmesg, pciconf -vl, kernel config, your complete xorg.conf and the Xorg > log file from the last run. attached hth Peter --Boundary-00=_uvHWEZ49B9wtnhP Content-Type: text/plain; charset="iso-8859-1"; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg" May 3 11:23:06 schlepptop syslogd: kernel boot file is /boot/kernel/kernel May 3 11:23:06 schlepptop kernel: Copyright (c) 1992-2006 The FreeBSD Project. May 3 11:23:06 schlepptop kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 May 3 11:23:06 schlepptop kernel: The Regents of the University of California. All rights reserved. May 3 11:23:06 schlepptop kernel: FreeBSD 7.0-CURRENT #11: Wed May 3 03:49:37 CEST 2006 May 3 11:23:06 schlepptop kernel: root@:/usr/obj/usr/src/sys/SCHLEPPTOP_CURRENT May 3 11:23:06 schlepptop kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 May 3 11:23:06 schlepptop kernel: CPU: Intel(R) Pentium(R) M processor 1.60GHz (1596.05-MHz 686-class CPU) May 3 11:23:06 schlepptop kernel: Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8 May 3 11:23:06 schlepptop kernel: Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> May 3 11:23:06 schlepptop kernel: Features2=0x180<EST,TM2> May 3 11:23:06 schlepptop kernel: AMD Features=0x100000<NX> May 3 11:23:06 schlepptop kernel: real memory = 535429120 (510 MB) May 3 11:23:06 schlepptop kernel: avail memory = 514539520 (490 MB) May 3 11:23:06 schlepptop kernel: acpi0: <PTLTD Ohlone00> on motherboard May 3 11:23:06 schlepptop kernel: acpi_bus_number: can't get _ADR May 3 11:23:06 schlepptop last message repeated 9 times May 3 11:23:06 schlepptop kernel: acpi0: Power Button (fixed) May 3 11:23:06 schlepptop kernel: acpi_bus_number: can't get _ADR May 3 11:23:06 schlepptop kernel: acpi_bus_number: can't get _ADR May 3 11:23:06 schlepptop kernel: acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 May 3 11:23:06 schlepptop kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 May 3 11:23:06 schlepptop kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 May 3 11:23:06 schlepptop kernel: cpu0: <ACPI CPU> on acpi0 May 3 11:23:06 schlepptop kernel: est0: <Enhanced SpeedStep Frequency Control> on cpu0 May 3 11:23:06 schlepptop kernel: p4tcc0: <CPU Frequency Thermal Control> on cpu0 May 3 11:23:06 schlepptop kernel: acpi_acad0: <AC Adapter> on acpi0 May 3 11:23:06 schlepptop kernel: battery0: <ACPI Control Method Battery> on acpi0 May 3 11:23:06 schlepptop kernel: acpi_lid0: <Control Method Lid Switch> on acpi0 May 3 11:23:06 schlepptop kernel: acpi_button0: <Power Button> on acpi0 May 3 11:23:06 schlepptop kernel: acpi_button1: <Sleep Button> on acpi0 May 3 11:23:06 schlepptop kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 May 3 11:23:06 schlepptop kernel: pci0: <ACPI PCI bus> on pcib0 May 3 11:23:06 schlepptop kernel: pcib1: <ACPI PCI-PCI bridge> irq 11 at device 1.0 on pci0 May 3 11:23:06 schlepptop kernel: pci1: <ACPI PCI bus> on pcib1 May 3 11:23:06 schlepptop kernel: vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xd0000000-0xd7ffffff,0xc0100000-0xc010ffff irq 11 at device 0.0 on pci1 May 3 11:23:06 schlepptop kernel: drm0: <ATI Radeon Mobility X600 M24> on vgapci0 May 3 11:23:06 schlepptop kernel: info: [drm] Initialized radeon 1.24.0 20060225 May 3 11:23:06 schlepptop kernel: pcib2: <ACPI PCI-PCI bridge> irq 10 at device 28.0 on pci0 May 3 11:23:06 schlepptop kernel: pci2: <ACPI PCI bus> on pcib2 May 3 11:23:06 schlepptop kernel: uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1800-0x181f irq 5 at device 29.0 on pci0 May 3 11:23:06 schlepptop kernel: uhci0: [GIANT-LOCKED] May 3 11:23:06 schlepptop kernel: usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 May 3 11:23:06 schlepptop kernel: usb0: USB revision 1.0 May 3 11:23:06 schlepptop kernel: uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 May 3 11:23:06 schlepptop kernel: uhub0: 2 ports with 2 removable, self powered May 3 11:23:06 schlepptop kernel: uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1820-0x183f irq 5 at device 29.1 on pci0 May 3 11:23:06 schlepptop kernel: uhci1: [GIANT-LOCKED] May 3 11:23:06 schlepptop kernel: usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 May 3 11:23:06 schlepptop kernel: usb1: USB revision 1.0 May 3 11:23:06 schlepptop kernel: uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 May 3 11:23:06 schlepptop kernel: uhub1: 2 ports with 2 removable, self powered May 3 11:23:06 schlepptop kernel: uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1840-0x185f irq 5 at device 29.2 on pci0 May 3 11:23:06 schlepptop kernel: uhci2: [GIANT-LOCKED] May 3 11:23:06 schlepptop kernel: usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 May 3 11:23:06 schlepptop kernel: usb2: USB revision 1.0 May 3 11:23:06 schlepptop kernel: uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 May 3 11:23:06 schlepptop kernel: uhub2: 2 ports with 2 removable, self powered May 3 11:23:06 schlepptop kernel: uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1860-0x187f irq 11 at device 29.3 on pci0 May 3 11:23:06 schlepptop kernel: uhci3: [GIANT-LOCKED] May 3 11:23:06 schlepptop kernel: usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 May 3 11:23:06 schlepptop kernel: usb3: USB revision 1.0 May 3 11:23:06 schlepptop kernel: uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 May 3 11:23:06 schlepptop kernel: uhub3: 2 ports with 2 removable, self powered May 3 11:23:06 schlepptop kernel: ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xc0000000-0xc00003ff irq 5 at device 29.7 on pci0 May 3 11:23:06 schlepptop kernel: ehci0: [GIANT-LOCKED] May 3 11:23:06 schlepptop kernel: usb4: EHCI version 1.0 May 3 11:23:06 schlepptop kernel: usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 May 3 11:23:06 schlepptop kernel: usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 May 3 11:23:06 schlepptop kernel: usb4: USB revision 2.0 May 3 11:23:06 schlepptop kernel: uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 May 3 11:23:06 schlepptop kernel: uhub4: 8 ports with 8 removable, self powered May 3 11:23:06 schlepptop kernel: pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 May 3 11:23:06 schlepptop kernel: pci6: <ACPI PCI bus> on pcib3 May 3 11:23:06 schlepptop kernel: bge0: <Broadcom BCM5788 Gigabit Ethernet, ASIC rev. 0x3003> mem 0xc8000000-0xc800ffff irq 5 at device 5.0 on pci6 May 3 11:23:06 schlepptop kernel: miibus0: <MII bus> on bge0 May 3 11:23:06 schlepptop kernel: brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0 May 3 11:23:06 schlepptop kernel: brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto May 3 11:23:06 schlepptop kernel: bge0: Ethernet address: 00:13:77:01:05:c2 May 3 11:23:06 schlepptop kernel: iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xc8010000-0xc8010fff irq 11 at device 7.0 on pci6 May 3 11:23:06 schlepptop kernel: iwi0: Ethernet address: 00:12:f0:1d:96:b5 May 3 11:23:06 schlepptop kernel: cbb0: <RF5C476 PCI-CardBus Bridge> at device 9.0 on pci6 May 3 11:23:06 schlepptop kernel: cardbus0: <CardBus bus> on cbb0 May 3 11:23:06 schlepptop kernel: pccard0: <16-bit PCCard bus> on cbb0 May 3 11:23:06 schlepptop kernel: fwohci0: <Ricoh R5C552> mem 0xc8011000-0xc80117ff at device 9.1 on pci6 May 3 11:23:06 schlepptop kernel: fwohci0: OHCI version 1.0 (ROM=1) May 3 11:23:06 schlepptop kernel: fwohci0: No. of Isochronous channels is 4. May 3 11:23:06 schlepptop kernel: fwohci0: EUI64 00:00:f0:41:20:04:66:bd May 3 11:23:06 schlepptop kernel: fwohci0: Phy 1394a available S400, 2 ports. May 3 11:23:06 schlepptop kernel: fwohci0: Link S400, max_rec 2048 bytes. May 3 11:23:06 schlepptop kernel: firewire0: <IEEE1394(FireWire) bus> on fwohci0 May 3 11:23:06 schlepptop kernel: sbp0: <SBP-2/SCSI over FireWire> on firewire0 May 3 11:23:06 schlepptop kernel: fwe0: <Ethernet over FireWire> on firewire0 May 3 11:23:06 schlepptop kernel: if_fwe0: Fake Ethernet address: 02:00:f0:04:66:bd May 3 11:23:06 schlepptop kernel: fwe0: Ethernet address: 02:00:f0:04:66:bd May 3 11:23:06 schlepptop kernel: fwe0: if_start running deferred for Giant May 3 11:23:06 schlepptop kernel: fwohci0: Initiate bus reset May 3 11:23:06 schlepptop kernel: fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode May 3 11:23:06 schlepptop kernel: firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) May 3 11:23:06 schlepptop kernel: firewire0: bus manager 0 (me) May 3 11:23:06 schlepptop kernel: pci6: <base peripheral> at device 9.2 (no driver attached) May 3 11:23:06 schlepptop kernel: pci6: <base peripheral> at device 9.3 (no driver attached) May 3 11:23:06 schlepptop kernel: pcm0: <Intel ICH6 (82801FB)> port 0x1c00-0x1cff,0x1880-0x18bf mem 0xc0000800-0xc00009ff,0xc0000400-0xc00004ff irq 10 at device 30.2 on pci0 May 3 11:23:06 schlepptop kernel: pcm0: <Analog Devices AD1981B AC97 Codec> May 3 11:23:06 schlepptop kernel: pci0: <simple comms, generic modem> at device 30.3 (no driver attached) May 3 11:23:06 schlepptop kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0 May 3 11:23:06 schlepptop kernel: isa0: <ISA bus> on isab0 May 3 11:23:06 schlepptop kernel: atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18c0-0x18cf at device 31.1 on pci0 May 3 11:23:06 schlepptop kernel: ata0: <ATA channel 0> on atapci0 May 3 11:23:06 schlepptop kernel: ata1: <ATA channel 1> on atapci0 May 3 11:23:06 schlepptop kernel: pci0: <serial bus, SMBus> at device 31.3 (no driver attached) May 3 11:23:06 schlepptop kernel: acpi_tz0: <Thermal Zone> on acpi0 May 3 11:23:06 schlepptop kernel: acpi_hpet0: <HPET - High Precision Event Timers> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 May 3 11:23:06 schlepptop kernel: acpi_hpet0: Vendor: 0x8086 May 3 11:23:06 schlepptop kernel: acpi_hpet0: Leg_Route_Cap: 1 May 3 11:23:06 schlepptop kernel: acpi_hpet0: Count_Size_Cap: 1 May 3 11:23:06 schlepptop kernel: acpi_hpet0: Num_Tim_Cap: 1 May 3 11:23:06 schlepptop kernel: acpi_hpet0: Rev_id: 0x1 May 3 11:23:06 schlepptop kernel: acpi_hpet0: Period: 69841279 fs (14318180 Hz) May 3 11:23:06 schlepptop kernel: acpi_hpet0: HPET attach May 3 11:23:06 schlepptop kernel: atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 May 3 11:23:06 schlepptop kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0 May 3 11:23:06 schlepptop kernel: kbd0 at atkbd0 May 3 11:23:06 schlepptop kernel: atkbd0: [GIANT-LOCKED] May 3 11:23:06 schlepptop kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0 May 3 11:23:06 schlepptop kernel: psm0: [GIANT-LOCKED] May 3 11:23:06 schlepptop kernel: psm0: model IntelliMouse, device ID 3 May 3 11:23:06 schlepptop kernel: pmtimer0 on isa0 May 3 11:23:06 schlepptop kernel: orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd3fff,0xdc000-0xdffff,0xe0000-0xe3fff pnpid ORM0000 on isa0 May 3 11:23:06 schlepptop kernel: sc0: <System console> at flags 0x100 on isa0 May 3 11:23:06 schlepptop kernel: sc0: VGA <16 virtual consoles, flags=0x300> May 3 11:23:06 schlepptop kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 May 3 11:23:06 schlepptop kernel: ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/11.10, addr 2> on uhub0 May 3 11:23:06 schlepptop kernel: ums0: 3 buttons and Z dir. May 3 11:23:06 schlepptop kernel: Timecounter "TSC" frequency 1596051492 Hz quality 800 May 3 11:23:06 schlepptop kernel: Timecounters tick every 3.333 msec May 3 11:23:06 schlepptop kernel: acpi_acad0: acline initialization start May 3 11:23:06 schlepptop kernel: acpi_acad0: On Line May 3 11:23:06 schlepptop kernel: acpi_acad0: acline initialibattery0: battery initialization start May 3 11:23:06 schlepptop kernel: zation done, tried 1 times May 3 11:23:06 schlepptop kernel: battery0: battery initialization done, tried 1 times May 3 11:23:06 schlepptop kernel: ad0: 56713MB <IC25N060ATMR04 0 MO3OAD4A> at ata0-master UDMA100 May 3 11:23:06 schlepptop kernel: acd0: DVDR <MATSHITADVD-RAM UJ-822S/1.00> at ata0-slave UDMA33 May 3 11:23:06 schlepptop kernel: cd0 at ata0 bus 0 target 1 lun 0 May 3 11:23:06 schlepptop kernel: cd0: <MATSHITA DVD-RAM UJ-822S 1.00> Removable CD-ROM SCSI-0 device May 3 11:23:06 schlepptop kernel: cd0: 33.000MB/s transfers May 3 11:23:06 schlepptop kernel: cd0: cd present [1 x 2048 byte records] May 3 11:23:06 schlepptop kernel: Trying to mount root from ufs:/dev/ad0s2a May 3 11:23:06 schlepptop savecore: no dumps found May 3 11:23:09 schlepptop ntpd: logging to file /var/log/ntpd.log May 3 11:26:53 schlepptop kernel: info: [drm] Setting GART location based on old memory map May 3 11:26:53 schlepptop kernel: info: [drm] Loading R300 Microcode May 3 11:26:53 schlepptop kernel: info: [drm] writeback test failed May 3 11:27:00 schlepptop kernel: stray irq7 May 3 11:27:25 schlepptop last message repeated 3 times May 3 11:27:29 schlepptop kernel: too many stray irq 7's: not logging anymore --Boundary-00=_uvHWEZ49B9wtnhP Content-Type: text/plain; charset="iso-8859-1"; name="SCHLEPPTOP_CURRENT" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="SCHLEPPTOP_CURRENT" # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.432 2005/08/06 23:05:48 davidxu Exp $ machine i386 #cpu I486_CPU #cpu I586_CPU cpu I686_CPU ident SCHLEPPTOP_CURRENT # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options SCHED_ULE # ULE scheduler #options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server #options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options MSDOSFS_LARGE # > 128 GB options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. options ADAPTIVE_GIANT # Giant mutex is adaptive. options HZ=300 # altq(9). Enable the base part of the hooks with the ALTQ option. # Individual disciplines must be built into the base system and can not be # loaded as modules at this point. ALTQ requires a stable TSC so if yours is # broken or changes with CPU throttling then you must also have the ALTQ_NOPCC # option. options ALTQ options ALTQ_CBQ # Class Bases Queueing options ALTQ_RED # Random Early Detection options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_CDNR # Traffic conditioner options ALTQ_PRIQ # Priority Queueing options ALTQ_NOPCC # Required if the TSC is unusable #options ALTQ_DEBUG # Debugging for use in -current #options KDB # Enable kernel debugger support. #options DDB # Support DDB. #options GDB # Support remote GDB. #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed # To make an SMP kernel, the next two lines are needed #options SMP # Symmetric MultiProcessor Kernel #device apic # I/O APIC # Bus support. Do not remove isa, even if you have no isa slots device isa device eisa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives device atapicam # emulate ATAPI devices as SCSI ditto via CAM options ATA_STATIC_ID # Static device numbering # DRM device drm # DRM core module required by DRM drivers device radeondrm # ATI Radeon # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device ahd # AHA39320/29320 and onboard AIC79xx devices #device amd # AMD 53C974 (Tekram DC-390(T)) #device isp # Qlogic family #device ispfw # Firmware for QLogic HBAs- normally a module #device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') #device trm # Tekram DC395U/UW/F DC315U adapters #device adv # Advansys SCSI adapters #device adw # Advansys wide SCSI adapters #device aha # Adaptec 154x SCSI adapters #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. #device bt # Buslogic/Mylex MultiMaster SCSI adapters #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) #device ch # SCSI media changers device da # Direct Access (disks) #device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers interfaced to the SCSI subsystem #device amr # AMI MegaRAID #device arcmsr # Areca SATA II RAID #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device ciss # Compaq Smart RAID 5* #device dpt # DPT Smartcache III, IV - See NOTES for options #device hptmv # Highpoint RocketRAID 182x #device iir # Intel Integrated RAID #device ips # IBM (Adaptec) ServeRAID #device mly # Mylex AcceleRAID/eXtremeRAID #device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers #device aac # Adaptec FSA RAID #device aacp # SCSI passthrough for aac (requires CAM) #device ida # Compaq Smart RAID #device mlx # Mylex DAC960 family #device pst # Promise Supertrak SX6000 #device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor device agp # support several AGP chipsets # To include support for VGA VESA video modes options VESA # Turn on extra debugging checks and output for VESA support. options VESA_DEBUG # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support device cbb # cardbus (yenta) bridge device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports #device sio # 8250, 16[45]50 based serial ports # Parallel port #device ppc #device ppbus # Parallel port bus (required) #device lpt # Printer #device plip # TCP/IP over parallel #device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to the sio and/or ppc drivers): #device puc # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device em # Intel PRO/1000 adapter Gigabit Ethernet Card #device ixgb # Intel PRO/10GbE Ethernet Card #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet #device dc # DEC/Intel 21143 and various workalikes #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device lge # Level 1 LXT1001 gigabit Ethernet #device nge # NatSemi DP83820 gigabit Ethernet #device nve # nVidia nForce MCP on-board Ethernet Networking #device pcn # AMD Am79C97x PCI 10/100(precedence over 'lnc') #device re # RealTek 8139C+/8169/8169S/8110S #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet #device ste # Sundance ST201 (D-Link DFE-550TX) #device ti # Alteon Networks Tigon I/II gigabit Ethernet #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vge # VIA VT612x gigabit Ethernet #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. #device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards #device ex # Intel EtherExpress Pro/10 and Pro/10+ #device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. #device lnc # NE2100, NE32-VL Lance Ethernet cards #device sn # SMC's 9000 series of Ethernet chips #device xe # Xircom pccard Ethernet # ISA devices that use the old ISA shims #device le # Wireless NIC cards device wlan # 802.11 support #device an # Aironet 4500/4800 802.11 wireless NICs. #device awi # BayStack 660 and others #device ral # Ralink Technology RT2500 wireless NICs. #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices. device loop # Network loopback device mem # Memory and kernel memory devices device io # I/O device device random # Entropy device device ether # Ethernet support #device sl # Kernel SLIP #device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse #device ural # Ralink Technology RT2500USB wireless NICs #device urio # Diamond Rio 500 MP3 player device uscanner # Scanners # USB Ethernet, requires miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!) --Boundary-00=_uvHWEZ49B9wtnhP Content-Type: text/plain; charset="iso-8859-1"; name="xorg.conf" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="xorg.conf" Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "DRI" Mode 0666 EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/TTF/" FontPath "/usr/X11R6/lib/X11/fonts/TrueType/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" FontPath "/usr/X11R6/lib/X11/fonts/URW/" FontPath "/usr/local/share/fonts/" FontPath "/usr/X11R6/lib/X11/fonts/bitstream-vera/" EndSection Section "Module" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "record" Load "xtrap" Load "freetype" Load "type1" EndSection Section "Extensions" Option "Composite" "Enable" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbLayout" "de" Option "XkbModel" "pc105" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/sysmouse" Option "ZAxisMapping" "4 5" Option "Buttons" "5" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" ModeLine "1400x1050minus" 108.00 1400 34208 34320 1688 1050 1052 1055 1063 -HSync -VSync EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "PanelOff" # [<bool>] #Option "DDCMode" # [<bool>] #Option "MonitorLayout" # [<str>] #Option "IgnoreEDID" # [<bool>] #Option "UseFBDev" # [<bool>] #Option "VideoKey" # <i> #Option "MergedFB" # [<bool>] #Option "CRT2HSync" # [<str>] #Option "CRT2VRefresh" # [<str>] #Option "CRT2Position" # [<str>] #Option "MetaModes" # [<str>] #Option "MergedDPI" # [<str>] #Option "NoMergedXinerama" # [<bool>] #Option "MergedXineramaCRT2IsScreen0" # [<bool>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ShowCache" # [<bool>] #Option "DynamicClocks" # [<bool>] Identifier "Card0" #Driver "ati" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "Unknown Board" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 Modes "1400x1050minus" EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1400x1050minus" EndSubSection EndSection --Boundary-00=_uvHWEZ49B9wtnhP Content-Type: text/plain; charset="iso-8859-1"; name="make.conf" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="make.conf" # newline CPUTYPE=pentium-m CFLAGS= -O -pipe NO_NIS=true NO_I4B=true BOOTWAIT=3000 KERNCONF=SCHLEPPTOP_CURRENT SUP_UPDATE=yes SUP=/usr/local/bin/cvsup SUPFLAGS= -g -L 1 SUPHOST=cvsup.at.FreeBSD.org SUPFILE=/usr/local/etc/standard-supfile PORTSSUPFILE=/usr/local/etc/ports-supfile DOCSUPFILE=/usr/local/etc/doc-supfile # added by use.perl 2006-04-10 16:45:28 PERL_VER=5.8.8 PERL_VERSION=5.8.8 --Boundary-00=_uvHWEZ49B9wtnhP--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200605031146.22340.peter>