From owner-freebsd-questions Wed Feb 8 07:45:14 1995 Return-Path: questions-owner Received: (from root@localhost) by freefall.cdrom.com (8.6.9/8.6.6) id HAA11649 for questions-outgoing; Wed, 8 Feb 1995 07:45:14 -0800 Received: from gaudi.diatel.upm.es (gaudi.diatel.upm.es [138.100.49.10]) by freefall.cdrom.com (8.6.9/8.6.6) with SMTP id HAA11636 for ; Wed, 8 Feb 1995 07:45:07 -0800 Received: by gaudi.diatel.upm.es (4.1/SMI-4.1) Wed, 8 Feb 95 12:51:30 +0100 X400-Received: by mta diatel.upm in /PRMD=/ADMD=/C=/; Relayed; Tue, 7 Feb 1995 18:20:42 UTC+0100 X400-Received: by /PRMD=iris/ADMD=mensatex/C=es/; Relayed; Tue, 7 Feb 1995 18:20:42 UTC+0100 Date: Tue, 7 Feb 1995 18:20:42 UTC+0100 X400-Originator: jmrueda@diatel.upm.es X400-Recipients: non-disclosure:; X400-Content-Type: P2-1984 (2) X400-Mts-Identifier: [/PRMD=iris/ADMD=mensatex/C=es/;950207182042] Content-Identifier: 598 Conversion: Prohibited From: Javier Martin Rueda To: questions@FreeBSD.org Message-Id: <598*/S=jmrueda/OU=diatel/O=upm/PRMD=iris/ADMD=mensatex/C=es/@MHS> Subject: PCI/VESA peripherals for FreeBSD 2.0 Mime-Version: 1.0 (Generated by Ean X.400 to MIME gateway) Sender: questions-owner@FreeBSD.org Precedence: bulk Hi. I'm about to purchase a 486DX2-66 PC to install FreeBSD 2.0 in it and use it as a server for NFS, printers, etc. Among its requirements, I have to use a fast SCSI-II controller, and a fast Ethernet network adapter. I want to use either PCI or VESA cards for those two, as I think that will be the fastest. Am I right? Would EISA be faster? First of all, I remember someone posted a few months ago the hardware used for freefall (24 Gb of disk, 90 MHz Pentium, PCI,...). Can someone e-mail me that again, please? Regarding VLB SCSI controllers, I've used and tested the Adaptec 2842 VLB with a Conner CFP-1060S drive in a 486DX-50, and IOZone reports about 1.5-2 Mb/sec for writing and 2.5-3.3 Mb/sec for reading (I've excluded figures that are too high for reading speed because of the Unix cache). Regarding PCI SCSI controllers, I haven't tested any. I'd appreciate that someone e-mail me the speed report generated by iozone with different SCSI controllers, specially the PCI controllers supported by FreeBSD (Buslogic 946c and NCR 53810). Is the Adaptec 2940 supported already, or support isn't ready yet? By the way, what does the 2940 have, so that it is about 4-5 times more expensive than the NCR, for example? With respect to Ethernet adapters, I have no experience with VESA or PCI ones. The release notes list a lot of network adapters supported by FreeBSD, but they don't say if they are ISA, EISA, PCI or VESA. Does that matter? For instance, I've seen VESA network adapters that are compatible with NE-2000. Does that mean that they can be used with FreeBSD just as if they were 16-bit ISA cards, but much faster? Again, I would appreciate reports of people who are using PCI or VESA network cards with FreeBSD, specifying the brand and model, and benchmark results, if available. Thanks in advance. If I get any reports (I hope so :-) ), I will post a summary here, just in case there are other people in the same situation.