Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 11 Mar 2015 20:45:09 -0700
From:      "Chris H" <bsd-lists@bsdforge.com>
To:        freebsd-stable@freebsd.org, Piotr Kubaj <pkubaj@riseup.net>
Subject:   Re: No sound on 10.1-RELEASE
Message-ID:  <17a2dc2d7eb20892a300050c37c3f783@ultimatedns.net>
In-Reply-To: <5500C2F6.5040908@riseup.net>
References:  <54FA3376.4020001@riseup.net> <821bd8e3acb111667353737ec5c8eb5c@ultimatedns.net>, <54FC9197.9040406@riseup.net> <f8b3d267d76caad7a3433880e49805b3@ultimatedns.net>, <54FED24A.9040503@riseup.net> <6bdeedc21fe40455bd8b82a60256436f@ultimatedns.net>, <5500C2F6.5040908@riseup.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 11 Mar 2015 23:34:30 +0100 Piotr Kubaj <pkubaj@riseup.net> wrote

> On 03/11/15 02:12, Chris H wrote:
> > On Tue, 10 Mar 2015 12:15:22 +0100 Piotr Kubaj <pkubaj@riseup.net> wrote
> > 
> >> On 03/08/15 22:15, Chris H wrote:
> >>> On Sun, 08 Mar 2015 19:14:47 +0100 Piotr Kubaj <pkubaj@riseup.net> wrote
> >>>
> >>>> On 03/07/15 01:55, Chris H wrote:
> >>>>> On Sat, 07 Mar 2015 00:08:38 +0100 Piotr Kubaj <pkubaj@riseup.net>
> >>>>> wrote >>>>>
> >>>>>> I've got MSI X99 motherboard and am using it with UEFI installation of
> > ----8<---BIG-SNIP---
> >>>>>
> >>>> I'm not sure what may be wrong in dmesg.boot so I've uploaded it here:
> >>>> http://pastebin.com/pP0KXp4v
> >>> Out of the 4 MSI boards I that I have; 3 run the same
> >>> Realtek ALC893 HDA CODEC that yours does. The other, the
> >>> Realtek ALC1200 HDA CODEC. All four of them work. But I
> >>> notice 1 notable difference; that yours reports 2
> >>> HDA interfaces:
> >>> hdac0: <NVIDIA (0x0fbb) HDA Controller>
> >>> and
> >>> hdac1: <Intel Wellsburg HDA Controller>
> >>> I see hdac0 is disregarded (unused) whereas
> >>> hdac1 is enabled, and functioning. I think your problems
> >>> quite possibly lies in your (sound) system attempting to
> >>> use the first HDA device in the list, which is effectively
> >>> disabled. If you can determine a way to tell KDE, and friends
> >>> to use the 2nd HDA. Things may well go as intended.
> >>> None of the 4 MSI boards I have display 2 HDA's, as yours
> >>> does.
> >>> If you have any additional questions, you may well find
> >>> the FreeBSD forums already have answers to your issue. This
> >>> is where I originally found answers to my issues, when I
> >>> first started using these boards.
> >>>
> >>> HTH
> >>>>
> >>>> KDE is definitely using OSS as chosen in its settings (I also use its
> >>>> own mixer which can do the same as Xfce's). I also use VLC's Phonon
> >>>> backend because Gstreamer is said to cause problems, but that also works
> >>>> on 3 other computers.
> >>>
> >> I don't think it's KDE's fault, as it also happens when I kill KDE
> >> (service kdm4 stop) and do cat /dev/random > /dev/dsp. Of course, I have
> >> vol and pcm maxed out.
> > If your speakers are amplified, you should hear them "pop",
> > when the kernel finds, and creates/attaches the driver(s) to
> > it. Same would be true, if you were wearing your headphones
> > when bouncing your box.
> > I'm quite sure that the sound system is defaulting the the first
> > HDA presented. Which, in your case, is the one that is disabled/
> > non-operational. It's not KDE per se; but how the software
> > decides, by default, to hook sound up. If you had a sound
> > control panel available in KDE. You *should* be able to
> > *choose* which sound device to use. In your case, provided
> > it's even seen, it would be the *2nd* HDA. The sound control
> > panel should also present the *status* of the sound device
> > that it's using. Which, in your case, would indicate everything
> > as being "muted", and/or "unavailable".
> > On the box I'm writing this from, the HDA/CODEC is the
> > Realtek ALC893, as yours is. I have it hooked up to a 700 watt
> > external amplifier that I use as sound for my entire house.
> > With the amplifier turned on, if I bounce the box (reboot)
> > I hear a "pop" when the kernel detects/attaches to the
> > sound chip. These are the relevant, and only "sound" related
> > devices, created/listed in /dev:
> > 
> > cd0
> > 
> > dsp0.0
> > dsp1.0
> > dsp2.0
> > dsp4.0
> > 
> > midistat
> > mixer0
> > mixer1
> > mixer2
> > mixer4
> > 
> > sndstat
> > 
> > If I'm not mistaken, you're probably running GENERIC, which
> > has *also* loaded snd_hda, and possibly/probably, others.
> > Which accounts for the additional HDA listing in dmesg(8).
> > What I would do, if I were you, is build/install a
> > custom kernel, stripped of any device not available
> > on your MB. This is the first thing I do, after a fresh
> > install, and, as you're discovering, for good reason. :)
> > You should also find, by doing so, that your system performs
> > much better, as a result.
> > The *only* sound related listings I have in my KERNCONF file,
> > is:
> > speaker # PC beeper
> > sound # geneic sound
> > snd_hda # Realtec CODEC HDA
> > Last, and only because I have to say it;
> > you *are* sure that you have your headphones/speakers
> > plugged into the *correct* jack, right? ;-)
> > Hey! It happens. :)
> > 
> > --Chris
> > 
> > --
> > 
> > 
> A small update: I can set hw.snd.default_unit=5 and sound works through
> the front panel, but not so through the back panel. I have tried any
> other value from 0 to 7 and the sound works with the back panel on
> Windows so it's connected properly.
Good(ish) news. I just recalled something that might prove
somewhat helpful in diagnosing your issue. I don't know
about yours; but if I unplug the speakers, or headphones, I
get a lot of noise on the console, regarding the event. It
indicated what was disconnected in such a way, that you might
well be able to compare the output with that of dmesg, to find
out what == what.

All the best.

--Chris

--





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?17a2dc2d7eb20892a300050c37c3f783>