From owner-freebsd-questions  Tue Aug  8 08:58:39 1995
Return-Path: questions-owner
Received: (from majordom@localhost)
          by freefall.cdrom.com (8.6.11/8.6.6) id IAA03974
          for questions-outgoing; Tue, 8 Aug 1995 08:58:39 -0700
Received: from localhost.cdrom.com (localhost.cdrom.com [127.0.0.1])
          by freefall.cdrom.com (8.6.11/8.6.6) with SMTP id IAA03965
          ; Tue, 8 Aug 1995 08:58:33 -0700
Message-Id: <199508081558.IAA03965@freefall.cdrom.com>
X-Authentication-Warning: freefall.cdrom.com: Host localhost.cdrom.com didn't use HELO protocol
To: john@starfire.mn.org
cc: questions@freebsd.org (FreeBSD questions)
Subject: Re: Adaptec 3940W with FreeBSD 
In-reply-to: Your message of "Tue, 08 Aug 95 08:12:16 CDT."
             <199508081312.IAA13884@starfire.mn.org> 
Date: Tue, 08 Aug 1995 08:58:32 -0700
From: "Justin T. Gibbs" <gibbs@freefall.cdrom.com>
Sender: questions-owner@freebsd.org
Precedence: bulk

>Is anyone using this controller (dual SCSI channel) with FreeBSD?  If so,
>what would be required in addition to adding the PCI_DEVICE_ID to at
>least use it as a 2940W until I can add support for the other channel?
>And, BTW, what is the PCI_DEVICE_ID for this board?  Is there a particular
>IRQ that needs to be assigned for things to work?
>
>		   John Lind, Starfire Consulting Services
>E-mail: john@starfire.MN.ORG		USnail: PO Box 17247, Mpls MN  55417

Both channels should be supported under FreeBSD-current.  If you have a 
board to test on, I'll send you a patch that will allow up to 255
commands per channel instead of the hard coded 16.  I haven't committed
it yet because I don't have hardware to test it on.

--
Justin T. Gibbs
===========================================
  Software Developer - Walnut Creek CDROM
  FreeBSD: Turning PCs into workstations
===========================================