Date: Wed, 13 Oct 2010 18:23:38 -0400 From: Bill Desjardins <bill@ethernext.com> To: freebsd-scsi@freebsd.org Subject: [amr] LSI Megaraid 320-2X U320 only reports U160 Message-ID: <AANLkTim1eTvYhysFxUah%2BW37fEYkaUkZ%2BB6kVcWGdqe5@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi,
I have a LSI Megaraid 320-2X which is not negotiating up to U320.
System is a dell 1950 with the 320-2x connected to a dell 220s
enclosure with 14 x seagate 146GB, 10k drives. the u320-2x has 512MB +
BBU and latest 414J firmware. the server has 2 x dual-core 3ghz xeons,
4GB and has had all firware updates. also, performance seems off at
~38MB/sec writes and ~20MB/sec reads (tested to single raid0 disk,
UFS, wrback, cache enabled).
actual speed negotiated: 166.664MB/s transfers (41.666MHz, offset 31, 32bit)
some info:
uname
---------------------
FreeBSD eis1.ethernap.net 8.1-STABLE FreeBSD 8.1-STABLE #0: Tue Oct 12
16:07:06 EDT 2010 bill@eis1:/usr/obj/usr/src/sys/GENERIC amd64
dmesg
---------------------------------------
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-STABLE #0: Tue Oct 12 16:07:06 EDT 2010
bill@eis1:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (2992.52-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
AMD Features=0x20000800<SYSCALL,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 4100427776 (3910 MB)
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic2: Changing APIC ID to 10
ioapic3: Changing APIC ID to 11
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
ioapic3 <Version 2.0> irqs 96-119 on motherboard
kbd1 at kbdmux0
acpi0: <DELL PE_SC3> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci6: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci6
pci7: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pci8: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci8
pci9: <PCI bus> on pcib4
bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1)> mem
0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bce0: Ethernet address: 00:15:c5:e9:2d:23
bce0: [ITHREAD]
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci7
pci10: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci6
pci11: <ACPI PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at device 1.0 on pci11
pci12: <PCI bus> on pcib7
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port
0xecc0-0xecff mem 0xf3ee0000-0xf3efffff irq 32 at device 4.0 on pci12
em0: [FILTER]
em0: Ethernet address: 00:04:23:09:9f:b4
em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port
0xec80-0xecbf mem 0xf3ec0000-0xf3edffff irq 33 at device 4.1 on pci12
em1: [FILTER]
em1: Ethernet address: 00:04:23:09:9f:b5
em2: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port
0xec40-0xec7f mem 0xf3ea0000-0xf3ebffff irq 34 at device 6.0 on pci12
em2: [FILTER]
em2: Ethernet address: 00:04:23:09:9f:b6
em3: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port
0xec00-0xec3f mem 0xf3e80000-0xf3e9ffff irq 35 at device 6.1 on pci12
em3: [FILTER]
em3: Ethernet address: 00:04:23:09:9f:b7
pcib8: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib9
mfi0: <Dell PERC 5/i> mem 0xd81f0000-0xd81fffff,0xfc9c0000-0xfc9dffff
irq 78 at device 14.0 on pci2
mfi0: Megaraid SAS driver Ver 3.00
mfi0: 6675 (340248585s/0x0020/info) - Shutdown command received from host
mfi0: 6676 (boot + 0s/0x0020/info) - Firmware initialization started
(PCI ID 0015/1028/1f03/1028)
mfi0: 6677 (boot + 0s/0x0020/info) - Firmware version 1.03.50-0461
mfi0: 6678 (boot + 23s/0x0008/info) - Battery Present
mfi0: 6679 (boot + 23s/0x0020/info) - Package version 5.2.2-0072
mfi0: 6680 (boot + 50s/0x0004/info) - Enclosure (SES) discovered on PD
08(e1/s255)
mfi0: 6681 (boot + 50s/0x0002/info) - Unexpected sense: PD
08(e1/s255), CDB: 1c 01 01 08 00 00, Sense: 70 00 06 00 00 00 00 0a 00
00 00 00 29 00 00 00 00 00
mfi0: 6682 (boot + 51s/0x0002/info) - Inserted: PD 08(e1/s255)
mfi0: 6683 (boot + 51s/0x0002/info) - Inserted: PD 08(e1/s255) Info:
enclPd=08, scsiType=d, portMap=00,
sasAddr=500180b03a3cda00,0000000000000000
mfi0: 6684 (boot + 51s/0x0002/info) - Inserted: PD 00(e1/s0)
mfi0: 6685 (boot + 51s/0x0002/info) - Inserted: PD 00(e1/s0) Info:
enclPd=08, scsiType=0, portMap=01,
sasAddr=500000e019c66992,0000000000000000
mfi0: 6686 (boot + 51s/0x0002/info) - Inserted: PD 01(e1/s1)
mfi0: 6687 (boot + 51s/0x0002/info) - Inserted: PD 01(e1/s1) Info:
enclPd=08, scsiType=0, portMap=02,
sasAddr=500000e0132fce92,0000000000000000
mfi0: 6688 (340248666s/0x0020/info) - Time established as 10/13/10
1:31:06; (51 seconds since power on)
mfi0: 6689 (340248723s/0x0008/info) - Battery temperature is normal
mfi0: [ITHREAD]
pcib10: <PCI-PCI bridge> at device 0.2 on pci1
pci3: <PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci13: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 0.0 on pci13
pci14: <ACPI PCI bus> on pcib12
pcib13: <PCI-PCI bridge> at device 3.0 on pci14
pci15: <PCI bus> on pcib13
amr0: <LSILogic MegaRAID 1.53> mem
0xd80f0000-0xd80fffff,0xfc600000-0xfc67ffff irq 96 at device 0.0 on
pci15
amr0: Using 64-bit DMA
amr0: [ITHREAD]
amr0: delete logical drives supported by controller
amrp0: <SCSI Passthrough Bus> on amr0
amr0: <LSILogic MegaRAID SCSI 320-2X> Firmware 414J, BIOS A100, 512MB RAM
pcib14: <PCI-PCI bridge> at device 5.0 on pci0
pci16: <PCI bus> on pcib14
pcib15: <PCI-PCI bridge> at device 6.0 on pci0
pci17: <PCI bus> on pcib15
pcib16: <PCI-PCI bridge> at device 7.0 on pci0
pci18: <PCI bus> on pcib16
pci0: <base peripheral> at device 8.0 (no driver attached)
pcib17: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib17
pcib18: <PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib18
bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1)> mem
0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bce1: Ethernet address: 00:15:c5:e9:2d:21
bce1: [ITHREAD]
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port
0xcce0-0xccff irq 21 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port
0xccc0-0xccdf irq 20 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port
0xcca0-0xccbf irq 21 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfca00400-0xfca007ff
irq 21 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 63XXESB USB 2.0 controller> on ehci0
pcib19: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci19: <ACPI PCI bus> on pcib19
vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem
0xd0000000-0xd7ffffff,0xfc2d0000-0xfc2dffff irq 19 at device 13.0 on
pci19
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel 63XXESB2 SATA300 controller> port
0xcc98-0xcc9f,0xcc90-0xcc93,0xcc80-0xcc87,0xcc78-0xcc7b,0xcc60-0xcc6f
mem 0xfca00000-0xfca003ff irq 23 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xc9fff,0xec000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 92a092a0600092a
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 92a092a0600092a
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 92a092a0600092a
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 92a092a0600092a
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based
forwarding enabled, default to accept, logging disabled
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
acd0: CDRW <HL-DT-STCD-RW/DVD-ROM GCC-4244N/B101> at ata0-master UDMA33
mfi0: 6690 (340248723s/0x0008/info) - Current capacity of the battery
is above threshold
mfid0: <MFI Logical Disk> on mfi0
mfid0: 139392MB (285474816 sectors) RAID volume 'BOOYAH' is optimal
amr0: delete logical drives supported by controller
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 139236MB (285155328 sectors) RAID 0 (optimal)
amrd1: <LSILogic MegaRAID logical drive> on amr0
amrd1: 139236MB (285155328 sectors) RAID 0 (optimal)
amrd2: <LSILogic MegaRAID logical drive> on amr0
amrd2: 139236MB (285155328 sectors) RAID 0 (optimal)
amrd3: <LSILogic MegaRAID logical drive> on amr0
amrd3: 139236MB (285155328 sectors) RAID 0 (optimal)
amrd4: <LSILogic MegaRAID logical drive> on amr0
amrd4: 139236MB (285155328 sectors) RAID 0 (optimal)
amrd5: <LSILogic MegaRAID logical drive> on amr0
amrd5: 139236MB (285155328 sectors) RAID 0 (optimal)
amrd6: <LSILogic MegaRAID logical drive> on amr0
amrd6: 139236MB (285155328 sectors) RAID 0 (optimal)
amrd7: <LSILogic MegaRAID logical drive> on amr0
amrd7: 139236MB (285155328 sectors) RAID 0 (optimal)
amrd8: <LSILogic MegaRAID logical drive> on amr0
amrd8: 139236MB (285155328 sectors) RAID 0 (optimal)
amrd9: <LSILogic MegaRAID logical drive> on amr0
amrd9: 139236MB (285155328 sectors) RAID 0 (optimal)
amrd10: <LSILogic MegaRAID logical drive> on amr0
amrd10: 278472MB (570310656 sectors) RAID 0 (optimal)
amrd11: <LSILogic MegaRAID logical drive> on amr0
amrd11: 139236MB (285155328 sectors) RAID 1 (optimal)
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen3.2: <vendor 0x413c> at usbus3
uhub4: <vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr
2> on usbus3
uhub4: 2 ports with 2 removable, self powered
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
ugen3.3: <Dell> at usbus3
ukbd0: <Keyboard> on usbus3
kbd2 at ukbd0
ums0: <Mouse> on usbus3
ums0: 3 buttons and [Z] coordinates ID=0
ugen3.4: <vendor 0x04b4> at usbus3
uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr
4> on usbus3
ugen1.2: <GASIA> at usbus1
ukbd1: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/1.00, addr 2> on usbus1
kbd3 at ukbd1
ums1: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/1.00, addr 2> on usbus1
ums1: 5 buttons and [XYZ] coordinates ID=1
uhub5: 4 ports with 4 removable, self powered
(probe0:amr0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:amr0:0:6:0): CAM status: SCSI Status Error
(probe0:amr0:0:6:0): SCSI status: Check Condition
(probe0:amr0:0:6:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
ses0 at amr0 bus 0 scbus0 target 6 lun 0
ses0: <DELL PV22XS E.17> Fixed Processor SCSI-3 device
ses0: 166.664MB/s transfers (41.666MHz, offset 31, 32bit)
ses0: SAF-TE Compliant Device
pass0 at amr0 bus 0 scbus0 target 0 lun 0
pass0: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device
pass0: 166.664MB/s transfers (41.666MHz, offset 31, 32bit)
pass1 at amr0 bus 0 scbus0 target 1 lun 0
pass1: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device
pass1: 166.664MB/s transfers (41.666MHz, offset 31, 32bit)
pass2 at amr0 bus 0 scbus0 target 2 lun 0
pass2: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device
pass2: 166.664MB/s transfers (41.666MHz, offset 31, 32bit)
pass3 at amr0 bus 0 scbus0 target 3 lun 0
pass3: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device
pass3: 166.664MB/s transfers (41.666MHz, offset 31, 32bit)
pass4 at amr0 bus 0 scbus0 target 4 lun 0
pass4: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device
pass4: 166.664MB/s transfers (41.666MHz, offset 31, 32bit)
pass5 at amr0 bus 0 scbus0 target 5 lun 0
pass5: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device
pass5: 166.664MB/s transfers (41.666MHz, offset 31, 32bit)
pass7 at amr0 bus 0 scbus0 target 8 lun 0
pass7: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device
pass7: 166.664MB/s transfers (41.666MHz, offset 31, 32bit)
pass8 at amr0 bus 0 scbus0 target 9 lun 0
pass8: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device
pass8: 166.664MB/s transfers (41.666MHz, offset 31, 32bit)
pass9 at amr0 bus 0 scbus0 target 10 lun 0
pass9: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device
pass9: 166.664MB/s transfers (41.666MHz, offset 31, 32bit)
pass10 at amr0 bus 0 scbus0 target 11 lun 0
pass10: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device
pass10: 166.664MB/s transfers (41.666MHz, offset 31, 32bit)
pass11 at amr0 bus 0 scbus0 target 12 lun 0
pass11: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device
pass11: 166.664MB/s transfers (41.666MHz, offset 31, 32bit)
pass12 at amr0 bus 0 scbus0 target 13 lun 0
pass12: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device
pass12: 166.664MB/s transfers (41.666MHz, offset 31, 32bit)
pass13 at amr0 bus 0 scbus0 target 14 lun 0
pass13: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device
pass13: 166.664MB/s transfers (41.666MHz, offset 31, 32bit)
pass14 at amr0 bus 0 scbus0 target 15 lun 0
pass14: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device
pass14: 166.664MB/s transfers (41.666MHz, offset 31, 32bit)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
pciconf -lv
---------------------------
amr0@pci0:15:0:0: class=0x010400 card=0x05321000 chip=0x04071000
rev=0x02 hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
device = 'MegaRAID'
class = mass storage
subclass = RAID
lspci -vvv -s 0f:00.0
-------------------------------------
0f:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 02)
Subsystem: LSI Logic / Symbios Logic MegaRAID 532 SCSI 320-2X
RAID Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (32000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 96
Region 0: Memory at d80f0000 (32-bit, prefetchable)
Region 2: Memory at fc600000 (32-bit, non-prefetchable)
Expansion ROM at fc500000 [disabled]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/2 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [e0] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=1
Status: Dev=0f:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge
DMMRBC=1024 DMOST=4 DMCRS=16 RSCEM- 266MHz- 533MHz-
Let me know if I can provide more information.
Thank you,
Bill
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTim1eTvYhysFxUah%2BW37fEYkaUkZ%2BB6kVcWGdqe5>