Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 30 Nov 2000 16:28:26 -0600 (CST)
From:      Mike Meyer <mwm@mired.org>
To:        shashi <shashi@Shift-F1.com>
Cc:        questions@freebsd.org
Subject:   Re: booting from CDROM fails
Message-ID:  <14886.54410.610972.962365@guru.mired.org>
In-Reply-To: <24900852@toto.iv>

next in thread | previous in thread | raw e-mail | index | archive | help
shashi <shashi@Shift-F1.com> types:
> Hi all,
> I have never had this problem before so am not sure how to handle this.
> I added a new hard disk to my computer (4th SCSI disk) which already had
> 3.4-stable. everything was fine. I could mount the CDROM.
> 
> then i said,let me install 4.0 from the DCROM.
> I changed the BIOS setup to change the boot sequence to be "CDROM, C, A"
> on reboot, it said it "found a Bootable CDROM", then it said "the cdrom drive has
> been changed from A: to B:"
> then it went ahead and booted from the hard drive!!!
> 
> i tried everything and failed to boot from CDROM. in desparation I said if there
> is no bootable C: it will pick the CDROM, so I formatted the hard disks and booted
> again, now it complains no bootable device!!
> 
> I have checked the boot sequence, it is CDROM first.
> I have a 450 MHz pretty recent computer, with Award BIOS, 4 SCSI HD, 1 SCSI CDROM.
> 
> any help will be appreciated. if possible cc me on the reply.

You didn't mention any IDE devices, so I'm going to assume you don't
have any.

Question 1: Have you ever booted off that CDROM drive? Are you sure it
can be done at all?

Question 2: What are your SCSI settings? On my SCSI system, it goes
"Boot, option to do BIOS setup. Probe SCSI card, option to do SCSI
setup. Etc." The SCSI settings have to tag the CDROM drive as
bootable. Further, the BIOS settings for this are "Boot from SCSI",
whether I'm booting from the disk or CDROM on the SCSI chain.

	<mike
--
Mike Meyer					http://www.mired.org/home/mwm/
Independent WWW/Unix/FreeBSD consultant,	email for rates.


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?14886.54410.610972.962365>