From owner-freebsd-stable Wed Jun 9 14:17:28 1999 Delivered-To: freebsd-stable@freebsd.org Received: from moek.pir.net (moek.pir.net [209.192.237.190]) by hub.freebsd.org (Postfix) with ESMTP id 87903151E8 for ; Wed, 9 Jun 1999 14:17:21 -0700 (PDT) (envelope-from pir@pir.net) Received: from pir by moek.pir.net with local (Exim) id 10rpiq-0002Bm-00 for freebsd-stable@FreeBSD.ORG; Wed, 9 Jun 1999 17:17:20 -0400 Date: Wed, 9 Jun 1999 17:17:19 -0400 From: Peter Radcliffe To: freebsd-stable@FreeBSD.ORG Subject: Re: MMAP() in STABLE/CURRENT ... Message-ID: <19990609171719.A6700@pir.net> Mail-Followup-To: freebsd-stable@FreeBSD.ORG References: <199906091835.OAA35583@cs.rpi.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i In-Reply-To: ; from The Hermit Hacker on Wed, Jun 09, 1999 at 03:48:58PM -0300 X-fish: < Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG The Hermit Hacker probably said: > On Wed, 9 Jun 1999, David E. Cross wrote: > > by "break" I mean a serial break condition. Take the Tx line out of your > > box and bring it negative 3-5 volts for a short time, that will be a break. > > > > Seriously, the break will need to be sent from the piece of equipment that is > > connected to the other end of the serial line. It isn't a telnet issue at all. > > There should be a way to drop into a command mode on the livingston (I have > > never used one, so I don't know how), and send a RS-232 break to the remote > > side. After that go back to terminal mode, you should be at a DDB prompt. > Will look into the break thing...don't believe there is a way of doing it, > but have to search the docs to be certain...thanks... When I used to telnet to portmasters (and ciscos, these days) used as console servers all I did was control-] to get the telnet command mode and type 'send brk', the portmaster sends the electrical signal. P. -- pir pir@pir.net pir@shore.net pir@net.tufts.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message