Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 24 Jan 2003 22:08:19 +0100 (CET)
From:      =?ISO-8859-2?Q?Gannater_J=E1nos?= <gannater@freemail.hu>
To:        BSD <freebsd-questions@freebsd.org>
Subject:   Web based e-mail.
Message-ID:  <freemail.20030024220819.13821@fm10.freemail.hu>
In-Reply-To: <3E31A4A6.5040508@acm.org>

next in thread | previous in thread | raw e-mail | index | archive | help
I want to have a web based e-mail service. So I don't have
to ssh to my computer all the time just browse a web page.
What I seen already is that IMP is a very good one. What do
you think of it? What do you use?
I have never used php and cgi things before, but these
things need it.  :((
I deleted these cgi releated things from my httpd.conf file.
And now I am in trouble. What parts should I add to my
httpd.conf file to make for example IMP work? And where
should I put the (IMP) files so I can access it throught the
internet? Because there is no index.html file in the
package.....


My http.conf file:
##
## httpd.conf -- Apache HTTP server configuration file
##

#
# Based upon the NCSA server configuration files originally
by Rob McCool.
#
# This is the main Apache server configuration file.  It
contains the
# configuration directives that give the server its
instructions.
# See <URL:http://www.apache.org/docs/>; for detailed
information about
# the directives.
#
# Do NOT simply read the instructions in here without
understanding
# what they do.  They're here only as hints or reminders. 
If you are unsure
# consult the online docs. You have been warned.  
#
# After this file is processed, the server will look for and
process
# /usr/local/conf/srm.conf and then /usr/local/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
#
# The configuration directives are grouped into three basic
sections:
#  1. Directives that control the operation of the Apache
server process as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or
'default' server,
#     which responds to requests that aren't handled by a
virtual host.
#     These directives also provide default values for the
settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests
to be sent to
#     different IP addresses or hostnames and have them
handled by the
#     same Apache server process.
#
# Configuration and logfile names: If the filenames you
specify for many
# of the server's control files begin with "/" (or "drive:/"
for Win32), the
# server will use that explicit path.  If the filenames do
*not* begin
# with "/", the value of ServerRoot is prepended -- so
"logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be
interpreted by the
# server as "/usr/local/apache/logs/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall
operation of Apache,
# such as the number of concurrent requests it can handle or
where it
# can find its configuration files.
#

#
# ServerType is either inetd, or standalone.  Inetd mode is
only supported on
# Unix platforms.
#
ServerType standalone

#
# ServerRoot: The top of the directory tree under which the
server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise
network)
# mounted filesystem then please read the LockFile documentation
# (available at
<URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
#
ServerRoot "/usr/local"

#
# The LockFile directive sets the path to the lockfile used
when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should
normally be left at
# its default value. The main reason for changing it is if
the logs
# directory is NFS mounted, since the lockfile MUST BE
STORED ON A LOCAL
# DISK. The PID of the main server process is automatically
appended to
# the filename. 
#
#LockFile /var/run/httpd.lock

#
# PidFile: The file in which the server should record its
process
# identification number when it starts.
#
PidFile /var/run/httpd.pid

#
# ScoreBoardFile: File used to store internal server process
information.
# Not all architectures require this.  But if yours does
(you'll know because
# this file will be  created when you run Apache) then you
*must* ensure that
# no two invocations of Apache share the same scoreboard file.
#
ScoreBoardFile /var/run/httpd.scoreboard

#
# In the standard configuration, the server will process
httpd.conf (this 
# file, specified by the -f command line option), srm.conf,
and access.conf 
# in that order.  The latter two files are now distributed
empty, as it is 
# recommended that all directives be kept in a single file
for simplicity.  
# The commented-out values below are the built-in defaults.
 You can have the 
# server ignore these files altogether by using "/dev/null"
(for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf

#
# Timeout: The number of seconds before receives and sends
time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections
(more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an
unlimited amount.
# We recommend you leave this number high, for maximum
performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next
request from the
# same client on the same connection.
#
KeepAliveTimeout 15

#
# Server-pool size regulation.  Rather than making you guess
how many
# server processes you need, Apache dynamically adapts to
the load it
# sees --- that is, it tries to maintain enough server
processes to
# handle the current load, plus a few spare servers to
handle transient
# load spikes (e.g., multiple simultaneous requests from a
single
# Netscape browser).
#
# It does this by periodically checking how many servers are
waiting
# for a request.  If there are fewer than MinSpareServers,
it creates
# a new spare.  If there are more than MaxSpareServers, some
of the
# spares die off.  The default values are probably OK for
most sites.
#
MinSpareServers 5
MaxSpareServers 10

#
# Number of servers to start initially --- should be a
reasonable ballpark
# figure.
#
StartServers 5

#
# Limit on total number of servers running, i.e., limit on
the number
# of clients who can simultaneously connect --- if this
limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE
SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server
from taking
# the system with it as it spirals down...
#
MaxClients 150

#
# MaxRequestsPerChild: the number of requests each child
process is
# allowed to process before the child dies.  The child will
exit so
# as to avoid problems after prolonged use when Apache (and
maybe the
# libraries it uses) leak memory or other resources.  On
most systems, this
# isn't really needed, but a few (such as Solaris) do have
notable leaks
# in the libraries. For these platforms, set to something
like 10000
# or so; a setting of 0 means unlimited.
#
# NOTE: This value does not include keepalive requests after
the initial
#       request per connection. For example, if a child
process handles
#       an initial request and 10 subsequent "keptalive"
requests, it
#       would only count as 1 request towards this limit.
#
MaxRequestsPerChild 0

#
# Listen: Allows you to bind Apache to specific IP addresses
and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
#Listen 3000
#Listen 12.34.56.78:80

#
# BindAddress: You can support virtual hosts with this
option. This directive
# is used to tell the server which IP address to listen to.
It can either
# contain "*", an IP address, or a fully qualified Internet
domain name.
# See also the <VirtualHost> and Listen directives.
#
#BindAddress *

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was
built as a DSO you
# have to place corresponding `LoadModule' lines at this
location so the
# directives contained in it are actually available _before_
they are used.
# Please read the file http://httpd.apache.org/docs/dso.html
for more
# details about the DSO mechanism and run `httpd -l' for the
list of already
# built-in (statically linked and thus always available)
modules in your httpd
# binary.
#
# Note: The order in which modules are loaded is important.
 Don't change
# the order below without expert advice.
#
# Example:
# LoadModule foo_module libexec/mod_foo.so
LoadModule mmap_static_module libexec/apache/mod_mmap_static.so
LoadModule vhost_alias_module libexec/apache/mod_vhost_alias.so
LoadModule env_module         libexec/apache/mod_env.so
LoadModule config_log_module  libexec/apache/mod_log_config.so
LoadModule mime_magic_module  libexec/apache/mod_mime_magic.so
LoadModule mime_module        libexec/apache/mod_mime.so
LoadModule negotiation_module libexec/apache/mod_negotiation.so
LoadModule status_module      libexec/apache/mod_status.so
LoadModule info_module        libexec/apache/mod_info.so
LoadModule includes_module    libexec/apache/mod_include.so
LoadModule autoindex_module   libexec/apache/mod_autoindex.so
LoadModule dir_module         libexec/apache/mod_dir.so
LoadModule asis_module        libexec/apache/mod_asis.so
LoadModule imap_module        libexec/apache/mod_imap.so
LoadModule action_module      libexec/apache/mod_actions.so
LoadModule speling_module     libexec/apache/mod_speling.so
LoadModule userdir_module     libexec/apache/mod_userdir.so
LoadModule alias_module       libexec/apache/mod_alias.so
LoadModule rewrite_module     libexec/apache/mod_rewrite.so
LoadModule access_module      libexec/apache/mod_access.so
LoadModule auth_module        libexec/apache/mod_auth.so
LoadModule anon_auth_module   libexec/apache/mod_auth_anon.so
LoadModule db_auth_module     libexec/apache/mod_auth_db.so
LoadModule digest_module      libexec/apache/mod_digest.so
LoadModule proxy_module       libexec/apache/libproxy.so
LoadModule cern_meta_module   libexec/apache/mod_cern_meta.so
LoadModule expires_module     libexec/apache/mod_expires.so
LoadModule headers_module     libexec/apache/mod_headers.so
LoadModule usertrack_module   libexec/apache/mod_usertrack.so
LoadModule unique_id_module   libexec/apache/mod_unique_id.so
LoadModule setenvif_module    libexec/apache/mod_setenvif.so
LoadModule zap_module         libexec/apache/mod_zap.so
#LoadModule watch_module       libexec/apache/mod_watch.so
#LoadModule tsunami_module     libexec/apache/mod_tsunami.so
#LoadModule trigger_module     libexec/apache/mod_trigger.so
#LoadModule ticket_module      libexec/apache/mod_ticket.so
#LoadModule throttle_module    libexec/apache/mod_throttle.so
#LoadModule sqlinclude_module  libexec/apache/mod_sqlinclude.so
#LoadModule sequester_module   libexec/apache/mod_sequester.so
#LoadModule sed_module         libexec/apache/mod_sed.so
#LoadModule put_module         libexec/apache/mod_put.so
#LoadModule proxy_add_forward_module
libexec/apache/mod_proxy_add_forward.so
LoadModule perl_module        libexec/apache/libperl.so
#LoadModule userdir_module    
libexec/apache/mod_mysqluserdir.so
#LoadModule mylo_module        libexec/apache/mod_mylo.so
#LoadModule mp3_module         libexec/apache/mod_mp3.so
#LoadModule log_mysql_module   libexec/apache/mod_log_mysql.so
LoadModule layout_module      libexec/apache/mod_layout.so
#LoadModule index_rss_module   libexec/apache/mod_index_rss.so
#LoadModule hosts_access_module
libexec/apache/mod_hosts_access.so
#LoadModule gzip_module        libexec/apache/mod_gzip.so
#LoadModule extract_forwarded_module
libexec/apache/mod_extract_forwarded.so
LoadModule cvs_module         libexec/apache/mod_cvs.so
#LoadModule csacek_module      libexec/apache/mod_csacek.so
#LoadModule color_module       libexec/apache/mod_color.so
#LoadModule blowchunks_module  libexec/apache/mod_blowchunks.so
#LoadModule bf_module          libexec/apache/mod_bf.so
#LoadModule backhand_module    libexec/apache/mod_backhand.so
#LoadModule auth_pam_module    libexec/apache/mod_auth_pam.so
#LoadModule auth_external_module
libexec/apache/mod_auth_external.so
#LoadModule auth_any_module    libexec/apache/mod_auth_any.so
#LoadModule access_referer_module
libexec/apache/mod_access_referer.so
#LoadModule access_identd_module
libexec/apache/mod_access_identd.so

#  Reconstruction of the complete module list from all
available modules
#  (static and shared ones) to achieve correct module
execution order.
#  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE
THIS, TOO]
ClearModuleList
AddModule mod_mmap_static.c
AddModule mod_vhost_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
AddModule mod_auth_db.c
AddModule mod_digest.c
AddModule mod_proxy.c
AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_usertrack.c
AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c
AddModule mod_zap.c
#AddModule mod_watch.c
#AddModule mod_tsunami.c
#AddModule mod_trigger.c
#AddModule mod_ticket.c
#AddModule mod_throttle.c
#AddModule mod_sqlinclude.c
#AddModule mod_sequester.c
#AddModule mod_sed.c
#AddModule mod_put.c
#AddModule mod_proxy_add_forward.c
AddModule mod_perl.c
#AddModule mod_mylo.c
#AddModule mod_mp3.c
AddModule mod_layout.c
#AddModule mod_index_rss.c
#AddModule mod_hosts_access.c
#AddModule mod_gzip.c
#AddModule mod_extract_forwarded.c
AddModule mod_cvs.c
#AddModule mod_csacek.c
#AddModule mod_color.c
#AddModule mod_blowchunks.c
#AddModule mod_bf.c
#AddModule mod_backhand.c
#AddModule mod_auth_pam.c
#AddModule mod_auth_external.c
#AddModule mod_auth_any.c
#AddModule mod_access_referer.c
#AddModule mod_access_identd.c

#
# ExtendedStatus controls whether Apache will generate
"full" status
# information (ExtendedStatus On) or just basic information
(ExtendedStatus
# Off) when the "server-status" handler is called. The
default is Off.
#
#ExtendedStatus On

### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by
the 'main'
# server, which responds to any requests that aren't handled
by a
# <VirtualHost> definition.  These values also provide
defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost>
containers,
# in which case these default settings will be overridden
for the
# virtual host being defined.
#

#
# If your ServerType directive (set earlier in the 'Global
Environment'
# section) is set to "inetd", the next few directives don't
have any
# effect since their settings are defined by the inetd
configuration.
# Skip ahead to the ServerAdmin directive.
#

#
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
#
Port 80

#
# If you wish httpd to run as a different user or group, you
must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run
httpd as.
#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
#  . On HPUX you may not be able to use shared memory as
nobody, and the
#    suggested workaround is to create a user www and use
that user.
#  NOTE that some kernels refuse to setgid(Group) or
semctl(IPC_SET)
#  when the value of (unsigned)Group is above 60000; 
#  don't use Group www on these systems!
#
User www
Group www

#
# ServerAdmin: Your address, where problems with the server
should be
# e-mailed.  This address appears on some server-generated
pages, such
# as error documents.
#
ServerAdmin you@your.address

#
# ServerName allows you to set a host name which is sent
back to clients for
# your server if it's different than the one the program
would get (i.e., use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they
work. The name you 
# define here must be a valid DNS name for your host. If you
don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its
IP address here.
# You will have to access it by its address (e.g.,
http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible
way.
#
# 127.0.0.1 is the TCP/IP local loop-back address, often
named localhost. Your 
# machine always knows itself by this address. If you use
Apache strictly for 
# local testing and development, you may use 127.0.0.1 as
the server name.
#
ServerName www.oliv.hu

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this
directory, but
# symbolic links and aliases may be used to point to other
locations.
#
DocumentRoot "/usr/local/www/data"

#
# Each directory to which Apache has access, can be
configured with respect
# to which services and features are allowed and/or disabled
in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive
set of 
# permissions.  
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not
working as
# you might expect, make sure that you have specifically
enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/usr/local/www/data">

#
# This may also be "None", "All", or any combination of
"Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* ---
"Options All"
# doesn't give it to you.
#
    Options Indexes FollowSymLinks MultiViews

#
# This controls which options the .htaccess files in
directories can
# override. Can also be "All", or any combination of
"Options", "FileInfo", 
# "AuthConfig", and "Limit"
#
    AllowOverride None

#
# Controls who can get stuff from this server.
#
    Order allow,deny
    Allow from all
</Directory>

#
# UserDir: The name of the directory which is appended onto
a user's home
# directory if a ~user request is received.
#
<IfModule mod_userdir.c>
    UserDir web
</IfModule>

#<Directory web>
#   AllowOverride FileInfo AuthConfig Limit
#   Options MultiViews Indexes SymLinksIfOwnerMatch
IncludesNoExec
#   <Limit GET POST OPTIONS PROPFIND>
#       Order allow,deny
#       Allow from all
#   </Limit>
#   <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK
UNLOCK>
#       Order deny,allow
#       Deny from all
#   </Limit>
#</Directory>
#
# Control access to UserDir directories.  The following is
an example
# for a site where these directories are restricted to
read-only.
#
#<Directory /home/csalad/*/web>
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch
IncludesNoExec
#</Directory>
#    <Limit GET POST OPTIONS PROPFIND>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS PROPFIND>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>

#
# DirectoryIndex: Name of the file or files to use as a
pre-written HTML
# directory index.  Separate multiple entries with spaces.
#
<IfModule mod_dir.c>
    <IfModule mod_php3.c>
        <IfModule mod_php4.c>
            DirectoryIndex index.php index.php3 index.html
        </IfModule>
        <IfModule !mod_php4.c>
            DirectoryIndex index.php3 index.html
        </IfModule>
    </IfModule>
    <IfModule !mod_php3.c>
        <IfModule mod_php4.c>
            DirectoryIndex index.php index.html
        </IfModule>
        <IfModule !mod_php4.c>
            DirectoryIndex index.html
        </IfModule>
    </IfModule>
</IfModule>

#
# AccessFileName: The name of the file to look for in each
directory
# for access control information.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess files from being
viewed by
# Web clients.  Since .htaccess files often contain
authorization
# information, access is disallowed for security reasons. 
Comment
# these lines out if you want Web visitors to see the
contents of
# .htaccess files.  If you change the AccessFileName
directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<Files ~ "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</Files>

#
# CacheNegotiatedDocs: By default, Apache sends "Pragma:
no-cache" with each
# document that was negotiated on the basis of content. This
asks proxy
# servers not to cache the document. Uncommenting the
following line disables
# this behavior, and proxies will be allowed to cache the
documents.
#
#CacheNegotiatedDocs

#
# UseCanonicalName:  (new for 1.3)  With this setting turned
on, whenever
# Apache needs to construct a self-referencing URL (a URL
that refers back
# to the server the response is coming from) it will use
ServerName and
# Port to form a "canonical" name.  With this setting off,
Apache will
# use the hostname:port that the client supplied, when
possible.  This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName On

#
# TypesConfig describes where the mime.types file (or
equivalent) is
# to be found.
#
<IfModule mod_mime.c>
    TypesConfig /usr/local/etc/apache/mime.types
</IfModule>

#
# DefaultType is the default MIME type the server will use
for a document
# if it cannot otherwise determine one, such as from
filename extensions.
# If your server contains mostly text or HTML documents,
"text/plain" is
# a good value.  If most of your content is binary, such as
applications
# or images, you may want to use "application/octet-stream"
instead to
# keep browsers from trying to display binary files as
though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various
hints from the
# contents of the file itself to determine its type.  The
MIMEMagicFile
# directive tells the module where the hint definitions are
located.
# mod_mime_magic is not part of the default server (you have
to add
# it yourself with a LoadModule [see the DSO paragraph in
the 'Global
# Environment' section], or recompile the server and include
mod_mime_magic
# as part of the configuration), so it's enclosed in an
<IfModule> container.
# This means that the MIMEMagicFile directive will only be
processed if the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
    MIMEMagicFile /usr/local/etc/apache/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP
addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the
net if people
# had to knowingly turn this feature on, since enabling it
means that
# each client request will result in AT LEAST one lookup
request to the
# nameserver.
#
HostnameLookups Off

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a
<VirtualHost>
# container, error messages relating to that virtual host
will be
# logged here.  If you *do* define an error logfile for a
<VirtualHost>
# container, that host's errors will be logged there and not
here.
#
ErrorLog /var/log/httpd-error.log

#
# LogLevel: Control the number of messages logged to the
error_log.
# Possible values include: debug, info, notice, warn, error,
crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for
use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
\"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# The location and format of the access logfile (Common
Logfile Format).
# If you do not define any access logfiles within a
<VirtualHost>
# container, they will be logged here.  Contrariwise, if you
*do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
#CustomLog /var/log/httpd-access.log common

#
# If you would like to have agent and referer logfiles,
uncomment the
# following directives.
#
#CustomLog /var/log/httpd-referer.log referer
#CustomLog /var/log/httpd-agent.log agent

#
# If you prefer a single logfile with access, agent, and
referer information
# (Combined Logfile Format) you can use the following directive.
#
CustomLog /var/log/httpd-access.log combined

#
# Optionally add a line containing the server version and
virtual host
# name to server-generated pages (error documents, FTP
directory listings,
# mod_status and mod_info output etc., but not CGI generated
documents).
# Set to "EMail" to also include a mailto: link to the
ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature On

# EBCDIC configuration:
# (only for mainframes using the EBCDIC codeset, currently
one of:
# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
# The following default configuration assumes that "text files"
# are stored in EBCDIC (so that you can operate on them
using the
# normal POSIX tools like grep and sort) while "binary
files" are
# stored with identical octets as on an ASCII machine.
#
# The directives are evaluated in configuration file order, with
# the EBCDICConvert directives applied before
EBCDICConvertByType.
#
# If you want to have ASCII HTML documents and EBCDIC HTML
documents
# at the same time, you can use the file extension to force
# conversion off for the ASCII documents:
# > AddType       text/html .ahtml
# > EBCDICConvert Off=InOut .ahtml
#
# EBCDICConvertByType  On=InOut text/* message/* multipart/*
# EBCDICConvertByType  On=In   
application/x-www-form-urlencoded
# EBCDICConvertByType  On=InOut application/postscript
model/vrml
# EBCDICConvertByType Off=InOut */*


#
# Aliases: Add here as many aliases as you need (with no
limit). The format is 
# Alias fakename realname
#
<IfModule mod_alias.c>

    #
    # Note that if you include a trailing / on fakename then
the server will
    # require it to be present in the URL.  So "/icons"
isn't aliased in this
    # example, only "/icons/".  If the fakename is
slash-terminated, then the 
    # realname must also be slash terminated, and if the
fakename omits the 
    # trailing slash, the realname must also omit it.
    #
    Alias /icons/ "/usr/local/www/icons/"

    <Directory "/usr/local/www/icons">
        Options Indexes MultiViews
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>

    # This Alias will project the on-line documentation tree
under /manual/
    # even if you change the DocumentRoot. Comment it if you
don't want to 
    # provide access to the on-line documentation.
    #
    Alias /manual/ "/usr/local/share/doc/apache/"

    <Directory "/usr/local/share/doc/apache">
        Options Indexes FollowSymlinks MultiViews
        AllowOverride None
        Order allow,deny
        Allow from all
    </Directory>

    #
    # ScriptAlias: This controls which directories contain
server scripts.
    # ScriptAliases are essentially the same as Aliases,
except that
    # documents in the realname directory are treated as
applications and
    # run by the server when requested rather than as
documents sent to the client.
    # The same rules about trailing "/" apply to ScriptAlias
directives as to
    # Alias.
    #
    ScriptAlias /cgi-bin/ "/usr/local/www/cgi-bin/"

    #
    # "/usr/local/www/cgi-bin" should be changed to whatever
your ScriptAliased
    # CGI directory exists, if you have that configured.
    #
    <Directory "/usr/local/www/cgi-bin">
        AllowOverride None
        Options None
        Order allow,deny
        Allow from all
    </Directory>

</IfModule>
# End of aliases.

#
# Redirect allows you to tell clients about documents which
used to exist in
# your server's namespace, but do not anymore. This allows
you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#

#
# Directives controlling the display of server-generated
directory listings.
#
<IfModule mod_autoindex.c>

    #
    # FancyIndexing is whether you want fancy directory
indexing or standard
    #
    IndexOptions FancyIndexing

    #
    # AddIcon* directives tell the server which icon to show
for different
    # files or filename extensions.  These are only
displayed for
    # FancyIndexed directories.
    #
    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress
x-gzip

    AddIconByType (TXT,/icons/text.gif) text/*
    AddIconByType (IMG,/icons/image2.gif) image/*
    AddIconByType (SND,/icons/sound2.gif) audio/*
    AddIconByType (VID,/icons/movie.gif) video/*

    AddIcon /icons/binary.gif .bin .exe
    AddIcon /icons/binhex.gif .hqx
    AddIcon /icons/tar.gif .tar
    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
    AddIcon /icons/a.gif .ps .ai .eps
    AddIcon /icons/layout.gif .html .shtml .htm .pdf
    AddIcon /icons/text.gif .txt
    AddIcon /icons/c.gif .c
    AddIcon /icons/p.gif .pl .py
    AddIcon /icons/f.gif .for
    AddIcon /icons/dvi.gif .dvi
    AddIcon /icons/uuencoded.gif .uu
    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
    AddIcon /icons/tex.gif .tex
    AddIcon /icons/bomb.gif core

    AddIcon /icons/back.gif ..
    AddIcon /icons/hand.right.gif README
    AddIcon /icons/folder.gif ^^DIRECTORY^^
    AddIcon /icons/blank.gif ^^BLANKICON^^

    #
    # DefaultIcon is which icon to show for files which do
not have an icon
    # explicitly set.
    #
    DefaultIcon /icons/unknown.gif

    #
    # AddDescription allows you to place a short description
after a file in
    # server-generated indexes.  These are only displayed
for FancyIndexed
    # directories.
    # Format: AddDescription "description" filename
    #
    #AddDescription "GZIP compressed document" .gz
    #AddDescription "tar archive" .tar
    #AddDescription "GZIP compressed tar archive" .tgz

    #
    # ReadmeName is the name of the README file the server
will look for by
    # default, and append to directory listings.
    #
    # HeaderName is the name of a file which should be
prepended to
    # directory indexes. 
    #
    # If MultiViews are amongst the Options in effect, the
server will
    # first look for name.html and include it if found.  If
name.html
    # doesn't exist, the server will then look for name.txt
and include
    # it as plaintext if found.
    #
    ReadmeName README
    HeaderName HEADER

    #
    # IndexIgnore is a set of filenames which directory
indexing should ignore
    # and not include in the listing.  Shell-style
wildcarding is permitted.
    #
    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

</IfModule>
# End of indexing directives.

#
# Document types.
#
<IfModule mod_mime.c>

    #
    # AddEncoding allows you to have certain browsers
(Mosaic/X 2.1+) uncompress
    # information on the fly. Note: Not all browsers support
this.
    # Despite the name similarity, the following Add*
directives have nothing
    # to do with the FancyIndexing customization directives
above.
    #
    AddEncoding x-compress Z
    AddEncoding x-gzip gz tgz

    #
    # AddLanguage allows you to specify the language of a
document. You can
    # then use content negotiation to give a browser a file
in a language
    # it can understand.  
    #
    # Note 1: The suffix does not have to be the same as the
language 
    # keyword --- those with documents in Polish (whose
net-standard 
    # language code is pl) may wish to use "AddLanguage pl
.po" to 
    # avoid the ambiguity with the common suffix for perl
scripts.
    #
    # Note 2: The example entries below illustrate that in quite
    # some cases the two character 'Language' abbreviation
is not
    # identical to the two character 'Country' code for its
country,
    # E.g. 'Danmark/dk' versus 'Danish/da'.
    #
    # Note 3: In the case of 'ltz' we violate the RFC by
using a three char 
    # specifier. But there is 'work in progress' to fix this
and get 
    # the reference data for rfc1766 cleaned up.
    #
    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
    # French (fr) - German (de) - Greek-Modern (el)
    # Italian (it) - Korean (kr) - Norwegian (no) -
Norwegian Nynorsk (nn)
    # Portugese (pt) - Luxembourgeois* (ltz)
    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
    # Russian (ru)
    #
    AddLanguage da .dk
    AddLanguage nl .nl
    AddLanguage en .en
    AddLanguage et .ee
    AddLanguage fr .fr
    AddLanguage de .de
    AddLanguage el .el
    AddLanguage he .he
    AddCharset ISO-8859-8 .iso8859-8
    AddLanguage it .it
    AddLanguage ja .ja
    AddCharset ISO-2022-JP .jis
    AddLanguage kr .kr
    AddCharset ISO-2022-KR .iso-kr
    AddLanguage nn .nn
    AddLanguage no .no
    AddLanguage pl .po
    AddCharset ISO-8859-2 .iso-pl
    AddLanguage pt .pt
    AddLanguage pt-br .pt-br
    AddLanguage ltz .lu
    AddLanguage ca .ca
    AddLanguage es .es
    AddLanguage sv .sv
    AddLanguage cz .cz
    AddLanguage ru .ru
    AddLanguage zh-tw .tw
    AddLanguage tw .tw
    AddCharset Big5         .Big5    .big5
    AddCharset WINDOWS-1251 .cp-1251
    AddCharset CP866        .cp866
    AddCharset ISO-8859-5   .iso-ru
    AddCharset KOI8-R       .koi8-r
    AddCharset UCS-2        .ucs2
    AddCharset UCS-4        .ucs4
    AddCharset UTF-8        .utf8

    # LanguagePriority allows you to give precedence to some
languages
    # in case of a tie during content negotiation.
    #
    # Just list the languages in decreasing order of
preference. We have
    # more or less alphabetized them here. You probably want
to change this.
    #
    <IfModule mod_negotiation.c>
        LanguagePriority en da nl et fr de el it ja kr no pl
pt pt-br ru ltz ca es sv tw
    </IfModule>

    <IfModule mod_php3.c>
	AddType application/x-httpd-php3 .php3
	AddType application/x-httpd-php3-source .php3s
    </IfModule>
    <IfModule mod_php4.c>
	AddType application/x-httpd-php .php
	AddType application/x-httpd-php-source .phps
    </IfModule>

    #
    # AddType allows you to tweak mime.types without
actually editing it, or to
    # make certain files to be certain types.
    #
    AddType application/x-tar .tgz
    AddType image/x-icon .ico

    #
    # AddHandler allows you to map certain file extensions
to "handlers",
    # actions unrelated to filetype. These can be either
built into the server
    # or added with the Action command (see below)
    #
    # If you want to use server side includes, or CGI outside
    # ScriptAliased directories, uncomment the following lines.
    #
    # To use CGI scripts:
    #
    #AddHandler cgi-script .cgi

    #
    # To use server-parsed HTML files
    #
    #AddType text/html .shtml
    #AddHandler server-parsed .shtml

    #
    # Uncomment the following line to enable Apache's
send-asis HTTP file
    # feature
    #
    #AddHandler send-as-is asis

    #
    # If you wish to use server-parsed imagemap files, use
    #
    #AddHandler imap-file map

    #
    # To enable type maps, you might want to use
    #
    #AddHandler type-map var

</IfModule>
# End of document types.

#
# Action lets you define media types that will execute a
script whenever
# a matching file is called. This eliminates the need for
repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# MetaDir: specifies the name of the directory in which
Apache can find
# meta information files. These files contain additional
HTTP headers
# to include when sending the document
#
#MetaDir .web

#
# MetaSuffix: specifies the file name suffix for the file
containing the
# meta information.
#
#MetaSuffix .meta

#
# Customizable error response (Apache style)
#  these come in three flavors
#
#    1) plain text
#ErrorDocument 500 "The server made a boo boo.
#  n.b.  the single leading (") marks it as text, it does
not get output
#
#    2) local redirects
#ErrorDocument 404 /missing.html
#  to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
#  N.B.: You can redirect to a script or a document using
server-side-includes.
#
#    3) external redirects
#ErrorDocument 402
http://some.other-server.com/subscription_info.html
#  N.B.: Many of the environment variables associated with
the original
#  request will *not* be available to such a script.

#
# Customize behaviour based on the browser
#
<IfModule mod_setenvif.c>

    #
    # The following directives modify normal HTTP response
behavior.
    # The first directive disables keepalive for Netscape
2.x and browsers that
    # spoof it. There are known problems with these browser
implementations.
    # The second directive is for Microsoft Internet
Explorer 4.0b2
    # which has a broken HTTP/1.1 implementation and does
not properly
    # support keepalive when it is used on 301 or 302
(redirect) responses.
    #
    BrowserMatch "Mozilla/2" nokeepalive
    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0
force-response-1.0

    #
    # The following directive disables HTTP/1.1 responses to
browsers which
    # are in violation of the HTTP/1.0 spec by not being
able to grok a
    # basic 1.1 response.
    #
    BrowserMatch "RealPlayer 4\.0" force-response-1.0
    BrowserMatch "Java/1\.0" force-response-1.0
    BrowserMatch "JDK/1\.0" force-response-1.0

</IfModule>
# End of browser customization directives

#
# Allow server status reports, with the URL of
http://servername/server-status
# Change the ".your-domain.com" to match your domain to enable.
#
#<Location /server-status>
#    SetHandler server-status
#    Order deny,allow
#    Deny from all
#    Allow from .your-domain.com
#</Location>

#
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be
loaded).
# Change the ".your-domain.com" to match your domain to enable.
#
#<Location /server-info>
#    SetHandler server-info
#    Order deny,allow
#    Deny from all
#    Allow from .your-domain.com
#</Location>

#
# There have been reports of people trying to abuse an old
bug from pre-1.1
# days.  This bug involved a CGI script distributed as a
part of Apache.
# By uncommenting these lines you can redirect these attacks
to a logging 
# script on phf.apache.org.  Or, you can record them
yourself, using the script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
#    Deny from all
#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>

#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#    ProxyRequests On

#    <Directory proxy:*>
#        Order deny,allow
#        Deny from all
#        Allow from .your-domain.com
#    </Directory>

    #
    # Enable/disable the handling of HTTP/1.1 "Via:" headers.
    # ("Full" adds the server version; "Block" removes all
outgoing Via: headers)
    # Set to one of: Off | On | Full | Block
    #
#    ProxyVia On

    #
    # To enable the cache as well, edit and uncomment the
following lines:
    # (no cacheing without CacheRoot)
    #
#    CacheRoot "/usr/local/www/proxy"
#    CacheSize 5
#    CacheGcInterval 4
#    CacheMaxExpire 24
#    CacheLastModifiedFactor 0.1
#    CacheDefaultExpire 1
#    NoCache a-domain.com another-domain.edu
joes.garage-sale.com

#</IfModule>
# End of proxy directives.

### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple
domains/hostnames on your
# machine you can setup VirtualHost containers for them.
Most configurations
# use only name-based virtual hosts so the server doesn't
need to worry about
# IP addresses. This is indicated by the asterisks in the
directives below.
#
# Please see the documentation at
<URL:http://www.apache.org/docs/vhosts/>;
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your
virtual host
# configuration.

#
# Use name-based virtual hosting.
#
#NameVirtualHost *

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost
container.
# The first VirtualHost section is used for requests without
a known
# server name.
#
#<VirtualHost *>
#    ServerAdmin webmaster@dummy-host.example.com
#    DocumentRoot /www/docs/dummy-host.example.com
#    ServerName dummy-host.example.com
#    ErrorLog logs/dummy-host.example.com-error_log
#    CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?freemail.20030024220819.13821>