Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 22 Feb 2012 20:15:16 -0800
From:      YongHyeon PYUN <pyunyh@gmail.com>
To:        Attila Nagy <bra@fsn.hu>
Cc:        stable@freebsd.org
Subject:   Re: Fatal trap 19, Stopped at bge_init_locked+ and bge booting problems
Message-ID:  <20120223041516.GI6861@michelle.cdnetworks.com>
In-Reply-To: <4F449E0B.2040909@fsn.hu>
References:  <4F449E0B.2040909@fsn.hu>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Feb 22, 2012 at 08:49:31AM +0100, Attila Nagy wrote:
> Hi,
> 
> I get this on a recent stable/9 system with uhci support removed from 
> the kernel config:
> da0 at ciss0 bus 0 scbus0 target 0 lun 0
> da0: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-5 device
> da0: 135.168MB/s transfers
> da0: Command Queueing enabled
> da0: 286070MB (585871964 512 byte sectors: 255H 32S/T 65535C)
> cd0 at ata3 bus 0 scbus3 target 0 lun 0
> cd0: <HP DV-W28S-W G.W3> Removable CD-ROM SCSI-0 device
> cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
> cd0: Attempt to query device size failed: NOT READY, Medium not present 
> - tray closed
> NMI ISA 70, EISA ff
> I/O channel check, likely hardware failure.
> 
> Fatal trap 19: non-maskable interrupt trap while in kernel mode
> cpuid = 0; apic id = 00
> instruction pointer     = 0x20:0xffffffff804543fb
> stack pointer           = 0x28:0xffffffff81251e40
> frame pointer           = 0x28:0xffffffff814cf660
> code segment            = base 0x0, limit 0xfffff, type 0x1b
>                         = DPL 0, pres 1, long 1, def32 0, gran 1
> processor eflags        = interrupt enabled, IOPL = 0
> current process         = 0 (swapper)
> [ thread pid 0 tid 100000 ]
> Stopped at      bge_init_locked+0x233b: movl    0x81c(%rsi),%eax
> db>
> 
> and this with a plain GENERIC kernel:
> da0 at ciss0 bus 0 scbus0 target 0 lun 0
> da0: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-5 device
> da0: 135.168MB/s transfers
> da0: Command Queueing enabled
> da0: 286070MB (585871964 512 byte sectors: 255H 32S/T 65535C)
> cd0 at ata3 bus 0 scbus3 target 0 lun 0
> cd0: <HP DV-W28S-W G.W3> Removable CD-ROM SCSI-0 device
> cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
> cd0: Attempt to query device size failed: NOT READY, Medium not present 
> - tray closed
> NMI ISA 70, EISA ff
> I/O channel check, likely hardware failure.
> 
> Fatal trap 19: non-maskable interrupt trap while in kernel mode
> cpuid = 0; apic id = 00
> instruction pointer     = 0x20:0xffffffff80711dc5
> stack pointer           = 0x28:0xffffffff81272040
> frame pointer           = 0x28:0xffffff907cf44b40
> code segment            = base 0x0, limit 0xfffff, type 0x1b
>                         = DPL 0, pres 1, long 1, def32 0, gran 1
> processor eflags        = interrupt enabled, IOPL = 0
> current process         = 12 (irq16: uhci0)
> [ thread pid 12 tid 100098 ]
> Stopped at      uhci_interrupt+0x65:    movzwl  %ax,%eax
> db> KDB: stack backtrace:
> KDB: stack backtrace:
> db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
> kdb_backtrace() at kdb_backtrace+0x37
> mi_switch() at mi_switch+0x27a
> turnstile_wait() at turnstile_wait+0x1cb
> _mtx_lock_sleep() at _mtx_lock_sleep+0xb0
> ukbd_poll() at ukbd_poll+0xbe
> kbdmux_poll() at kbdmux_poll+0x3f
> sc_cngetc() at sc_cngetc+0xec
> cncheckc() at cncheckc+0x4a
> cngetc() at cngetc+0x1c
> db_readline() at db_readline+0x77
> db_read_line() at db_read_line+0x15
> db_command_loop() at db_command_loop+0x38
> db_trap() at db_trap+0x89
> kdb_trap() at kdb_trap+0x101
> trap_fatal() at trap_fatal+0x29d
> trap() at trap+0x10a
> nmi_calltrap() at nmi_calltrap+0x8
> --- trap 0x13, rip = 0xffffffff80711dc5, rsp = 0xffffffff81272040, rbp = 
> 0xffffff907cf44b40 ---
> uhci_interrupt() at uhci_interrupt+0x65
> intr_event_execute_handlers() at intr_event_execute_handlers+0x104
> ithread_loop() at ithread_loop+0xa4
> fork_exit() at fork_exit+0x11f
> fork_trampoline() at fork_trampoline+0xe
> --- trap 0, rip = 0, rsp = 0xffffff907cf44d00, rbp = 0 ---
> db>
> 
> After disabling stopping on NMI (kdb_on_nmi), I still can't boot from 
> bge (this is a PXE booted machine), I get this in an infinite loop:
> bge1: link state changed to DOWN
> DHCP/BOOTP timeout for server 255.255.255.255
> bge1: 3 link states coalesced
> bge1: link state changed to UP
> bge0: 2 link states coalesced
> bge0: link state changed to DOWN
> bge0: link state changed to UP
> bge1: link state changed to DOWN
> bge0: link state changed to DOWN
> bge0: link state changed to UP
> bge0: link state changed to DOWN
> bge1: 2 link states coalesced
> bge1: link state changed to DOWN
> bge0: link state changed to UP
> bge0: link state changed to DOWN
> bge0: 2 link states coalesced
> bge0: link state changed to DOWN
> bge1: 2 link states coalesced
> bge1: link state changed to DOWN
> bge0: link state changed to UP
> bge0: link state changed to DOWN
> bge0: link state changed to UP
> bge0: link state changed to DOWN
> 
> Linux and Windows boot fine on the machine.
> 
> dmesg up to the point where it crashes:
> Copyright (c) 1992-2012 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 9.0-STABLE #3: Tue Feb 21 11:57:33 CET 2012
>     root@boot.lab:/usr/obj/usr/src/sys/BOOTCLNT amd64
> CPU: Intel(R) Xeon(R) CPU E5-2680 0 @ 2.70GHz (2693.57-MHz K8-class CPU)
>   Origin = "GenuineIntel"  Id = 0x206d6  Family = 6  Model = 2d  
> Stepping = 6
>   
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   
> Features2=0x15bee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,AVX>
>   AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
>   AMD Features2=0x1<LAHF>
>   TSC: P-state invariant, performance statistics
> real memory  = 34359738368 (32768 MB)
> avail memory = 32991268864 (31462 MB)
> Event timer "LAPIC" quality 600
> ACPI APIC Table: <HP     ProLiant>
> FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs
> FreeBSD/SMP: 2 package(s) x 8 core(s) x 2 SMT threads
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
>  cpu2 (AP): APIC ID:  2
>  cpu3 (AP): APIC ID:  3
>  cpu4 (AP): APIC ID:  4
>  cpu5 (AP): APIC ID:  5
>  cpu6 (AP): APIC ID:  6
>  cpu7 (AP): APIC ID:  7
>  cpu8 (AP): APIC ID:  8
>  cpu9 (AP): APIC ID:  9
>  cpu10 (AP): APIC ID: 10
>  cpu11 (AP): APIC ID: 11
>  cpu12 (AP): APIC ID: 12
>  cpu13 (AP): APIC ID: 13
>  cpu14 (AP): APIC ID: 14
>  cpu15 (AP): APIC ID: 15
>  cpu16 (AP): APIC ID: 32
>  cpu17 (AP): APIC ID: 33
>  cpu18 (AP): APIC ID: 34
>  cpu19 (AP): APIC ID: 35
>  cpu20 (AP): APIC ID: 36
>  cpu21 (AP): APIC ID: 37
>  cpu22 (AP): APIC ID: 38
>  cpu23 (AP): APIC ID: 39
>  cpu24 (AP): APIC ID: 40
>  cpu25 (AP): APIC ID: 41
>  cpu26 (AP): APIC ID: 42
>  cpu27 (AP): APIC ID: 43
>  cpu28 (AP): APIC ID: 44
>  cpu29 (AP): APIC ID: 45
>  cpu30 (AP): APIC ID: 46
>  cpu31 (AP): APIC ID: 47
> ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 
> (20110527/tbfadt-638)
> ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 
> (20110527/tbfadt-638)
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic2 <Version 2.0> irqs 48-71 on motherboard
> kbd1 at kbdmux0
> ctl: CAM Target Layer loaded
> cryptosoft0: <software crypto> on motherboard
> acpi0: <HP ProLiant> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> cpu4: <ACPI CPU> on acpi0
> cpu5: <ACPI CPU> on acpi0
> cpu6: <ACPI CPU> on acpi0
> cpu7: <ACPI CPU> on acpi0
> cpu8: <ACPI CPU> on acpi0
> cpu9: <ACPI CPU> on acpi0
> cpu10: <ACPI CPU> on acpi0
> cpu11: <ACPI CPU> on acpi0
> cpu12: <ACPI CPU> on acpi0
> cpu13: <ACPI CPU> on acpi0
> cpu14: <ACPI CPU> on acpi0
> cpu15: <ACPI CPU> on acpi0
> cpu16: <ACPI CPU> on acpi0
> cpu17: <ACPI CPU> on acpi0
> cpu18: <ACPI CPU> on acpi0
> cpu19: <ACPI CPU> on acpi0
> cpu20: <ACPI CPU> on acpi0
> cpu21: <ACPI CPU> on acpi0
> cpu22: <ACPI CPU> on acpi0
> cpu23: <ACPI CPU> on acpi0
> cpu24: <ACPI CPU> on acpi0
> cpu25: <ACPI CPU> on acpi0
> cpu26: <ACPI CPU> on acpi0
> cpu27: <ACPI CPU> on acpi0
> cpu28: <ACPI CPU> on acpi0
> cpu29: <ACPI CPU> on acpi0
> cpu30: <ACPI CPU> on acpi0
> cpu31: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci7: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 1.1 on pci0
> pci19: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pci0:3:0:0: failed to read VPD data.
> bge0: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 
> 0xf6bf0000-0xf6bfffff,0xf6be0000-0xf6beffff,0xf6bd0000-0xf6bdffff irq 32 
> at device 0.0 on pci3
> bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
                ^^^^^^^^^^

This controller is new one. Probably BCM5719 A1 but not sure.

> bge0: Try again

This message indicates your controller has ASF/IPMI firmware.
Try disabling ASF and see whether it makes any difference.
(Change hw.bge.allow_asf tunable to 0).

> miibus0: <MII bus> on bge0
> ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
> ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 
> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, 
> auto-flow

I think the use of ukphy(4) here is the side effect of ASF. BCM5719
should use brgphy(4).

> bge0: Ethernet address: 3c:4a:92:b2:3c:08
> pci0:3:0:1: failed to read VPD data.
> bge1: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 
> 0xf6bc0000-0xf6bcffff,0xf6bb0000-0xf6bbffff,0xf6ba0000-0xf6baffff irq 36 
> at device 0.1 on pci3
> bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
> miibus1: <MII bus> on bge1
> brgphy0: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
> bge1: Ethernet address: 3c:4a:92:b2:3c:09
> pci0:3:0:2: failed to read VPD data.
> bge2: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 
> 0xf6b90000-0xf6b9ffff,0xf6b80000-0xf6b8ffff,0xf6b70000-0xf6b7ffff irq 32 
> at device 0.2 on pci3
> bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
> miibus2: <MII bus> on bge2
> brgphy1: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2
> brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
> bge2: Ethernet address: 3c:4a:92:b2:3c:0a
> pci0:3:0:3: failed to read VPD data.
> bge3: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 
> 0xf6b60000-0xf6b6ffff,0xf6b50000-0xf6b5ffff,0xf6b40000-0xf6b4ffff irq 36 
> at device 0.3 on pci3
> bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
> miibus3: <MII bus> on bge3
> brgphy2: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3
> brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
> bge3: Ethernet address: 3c:4a:92:b2:3c:0b
> pcib4: <ACPI PCI-PCI bridge> at device 2.1 on pci0
> pci20: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> at device 2.2 on pci0
> pci2: <ACPI PCI bus> on pcib5
> ciss0: <HP Smart Array P420i> port 0x5000-0x50ff mem 
> 0xf7f00000-0xf7ffffff,0xf7ef0000-0xf7ef03ff irq 34 at device 0.0 on pci2
> ciss0: PERFORMANT Transport
> pcib6: <ACPI PCI-PCI bridge> at device 2.3 on pci0
> pci21: <ACPI PCI bus> on pcib6
> pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> pci4: <ACPI PCI bus> on pcib7
> pcib8: <ACPI PCI-PCI bridge> at device 3.1 on pci0
> pci22: <ACPI PCI bus> on pcib8
> pcib9: <ACPI PCI-PCI bridge> at device 3.2 on pci0
> pci23: <ACPI PCI bus> on pcib9
> pcib10: <ACPI PCI-PCI bridge> at device 3.3 on pci0
> pci24: <ACPI PCI bus> on pcib10
> pci0: <base peripheral> at device 4.0 (no driver attached)
> pci0: <base peripheral> at device 4.1 (no driver attached)
> pci0: <base peripheral> at device 4.2 (no driver attached)
> pci0: <base peripheral> at device 4.3 (no driver attached)
> pci0: <base peripheral> at device 4.4 (no driver attached)
> pci0: <base peripheral> at device 4.5 (no driver attached)
> pci0: <base peripheral> at device 4.6 (no driver attached)
> pci0: <base peripheral> at device 4.7 (no driver attached)
> pci0: <base peripheral> at device 5.0 (no driver attached)
> pci0: <base peripheral> at device 5.2 (no driver attached)
> pcib11: <ACPI PCI-PCI bridge> at device 17.0 on pci0
> pci26: <ACPI PCI bus> on pcib11
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf6c60000-0xf6c603ff irq 
> 21 at device 26.0 on pci0
> usbus0: EHCI version 1.0
> usbus0: <EHCI (generic) USB 2.0 controller> on ehci0
> pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> pci10: <ACPI PCI bus> on pcib12
> pcib13: <ACPI PCI-PCI bridge> at device 28.7 on pci0
> pci1: <ACPI PCI bus> on pcib13
> pci1: <base peripheral> at device 0.0 (no driver attached)
> vgapci0: <VGA-compatible display> mem 
> 0xf5000000-0xf5ffffff,0xf7de0000-0xf7de3fff,0xf7000000-0xf77fffff irq 16 
> at device 0.1 on pci1
> pci1: <base peripheral> at device 0.2 (no driver attached)
> uhci0: <UHCI (generic) USB controller> port 0x3c00-0x3c1f irq 16 at 
> device 0.4 on pci1
> usbus1: <UHCI (generic) USB controller> on uhci0
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf6c50000-0xf6c503ff irq 
> 20 at device 29.0 on pci0
> usbus2: EHCI version 1.0
> usbus2: <EHCI (generic) USB 2.0 controller> on ehci1
> pcib14: <PCI-PCI bridge> at device 30.0 on pci0
> pci25: <PCI bus> on pcib14
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel Patsburg SATA300 controller> port 
> 0x4000-0x4007,0x4008-0x400b,0x4010-0x4017,0x4018-0x401b,0x4020-0x402f,0x4030-0x403f 
> irq 17 at device 31.2 on pci0
> ata2: <ATA channel> at channel 0 on atapci0
> ata3: <ATA channel> at channel 1 on atapci0
> pcib15: <ACPI Host-PCI bridge> on acpi0
> pci32: <ACPI PCI bus> on pcib15
> pcib16: <PCI-PCI bridge> at device 0.0 on pci32
> pci43: <PCI bus> on pcib16
> pcib17: <ACPI PCI-PCI bridge> at device 1.0 on pci32
> pci36: <ACPI PCI bus> on pcib17
> pcib18: <ACPI PCI-PCI bridge> at device 1.1 on pci32
> pci37: <ACPI PCI bus> on pcib18
> pcib19: <ACPI PCI-PCI bridge> at device 2.0 on pci32
> pci35: <ACPI PCI bus> on pcib19
> pcib20: <ACPI PCI-PCI bridge> at device 2.1 on pci32
> pci38: <ACPI PCI bus> on pcib20
> pcib21: <ACPI PCI-PCI bridge> at device 2.2 on pci32
> pci34: <ACPI PCI bus> on pcib21
> pcib22: <ACPI PCI-PCI bridge> at device 2.3 on pci32
> pci39: <ACPI PCI bus> on pcib22
> pcib23: <ACPI PCI-PCI bridge> at device 3.0 on pci32
> pci33: <ACPI PCI bus> on pcib23
> pcib24: <ACPI PCI-PCI bridge> at device 3.1 on pci32
> pci40: <ACPI PCI bus> on pcib24
> pcib25: <ACPI PCI-PCI bridge> at device 3.2 on pci32
> pci41: <ACPI PCI bus> on pcib25
> pcib26: <ACPI PCI-PCI bridge> at device 3.3 on pci32
> pci42: <ACPI PCI bus> on pcib26
> pci32: <base peripheral> at device 4.0 (no driver attached)
> pci32: <base peripheral> at device 4.1 (no driver attached)
> pci32: <base peripheral> at device 4.2 (no driver attached)
> pci32: <base peripheral> at device 4.3 (no driver attached)
> pci32: <base peripheral> at device 4.4 (no driver attached)
> pci32: <base peripheral> at device 4.5 (no driver attached)
> pci32: <base peripheral> at device 4.6 (no driver attached)
> pci32: <base peripheral> at device 4.7 (no driver attached)
> pci32: <base peripheral> at device 5.0 (no driver attached)
> pci32: <base peripheral> at device 5.2 (no driver attached)
> acpi_tz0: <Thermal Zone> on acpi0
> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 450
> Event timer "HPET1" frequency 14318180 Hz quality 440
> Event timer "HPET2" frequency 14318180 Hz quality 440
> Event timer "HPET3" frequency 14318180 Hz quality 440
> Event timer "HPET4" frequency 14318180 Hz quality 440
> Event timer "HPET5" frequency 14318180 Hz quality 440
> Event timer "HPET6" frequency 14318180 Hz quality 440
> Event timer "HPET7" frequency 14318180 Hz quality 440
> atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
> Event timer "RTC" frequency 32768 Hz quality 0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 
> 3 on acpi0
> orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ppc0: cannot reserve I/O port range
> uart0: <Non-standard ns8250 class UART with FIFOs> at port 0x3f8-0x3ff 
> irq 4 flags 0x10 on isa0
> uart0: console (9600,n,8,1)
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est0 attach returned 6
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est1 attach returned 6
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est2 attach returned 6
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est3 attach returned 6
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> est4: <Enhanced SpeedStep Frequency Control> on cpu4
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est4 attach returned 6
> p4tcc4: <CPU Frequency Thermal Control> on cpu4
> est5: <Enhanced SpeedStep Frequency Control> on cpu5
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est5 attach returned 6
> p4tcc5: <CPU Frequency Thermal Control> on cpu5
> est6: <Enhanced SpeedStep Frequency Control> on cpu6
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est6 attach returned 6
> p4tcc6: <CPU Frequency Thermal Control> on cpu6
> est7: <Enhanced SpeedStep Frequency Control> on cpu7
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est7 attach returned 6
> p4tcc7: <CPU Frequency Thermal Control> on cpu7
> est8: <Enhanced SpeedStep Frequency Control> on cpu8
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est8 attach returned 6
> p4tcc8: <CPU Frequency Thermal Control> on cpu8
> est9: <Enhanced SpeedStep Frequency Control> on cpu9
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est9 attach returned 6
> p4tcc9: <CPU Frequency Thermal Control> on cpu9
> est10: <Enhanced SpeedStep Frequency Control> on cpu10
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est10 attach returned 6
> p4tcc10: <CPU Frequency Thermal Control> on cpu10
> est11: <Enhanced SpeedStep Frequency Control> on cpu11
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est11 attach returned 6
> p4tcc11: <CPU Frequency Thermal Control> on cpu11
> est12: <Enhanced SpeedStep Frequency Control> on cpu12
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est12 attach returned 6
> p4tcc12: <CPU Frequency Thermal Control> on cpu12
> est13: <Enhanced SpeedStep Frequency Control> on cpu13
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est13 attach returned 6
> p4tcc13: <CPU Frequency Thermal Control> on cpu13
> est14: <Enhanced SpeedStep Frequency Control> on cpu14
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est14 attach returned 6
> p4tcc14: <CPU Frequency Thermal Control> on cpu14
> est15: <Enhanced SpeedStep Frequency Control> on cpu15
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est15 attach returned 6
> p4tcc15: <CPU Frequency Thermal Control> on cpu15
> est16: <Enhanced SpeedStep Frequency Control> on cpu16
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est16 attach returned 6
> p4tcc16: <CPU Frequency Thermal Control> on cpu16
> est17: <Enhanced SpeedStep Frequency Control> on cpu17
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est17 attach returned 6
> p4tcc17: <CPU Frequency Thermal Control> on cpu17
> est18: <Enhanced SpeedStep Frequency Control> on cpu18
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est18 attach returned 6
> p4tcc18: <CPU Frequency Thermal Control> on cpu18
> est19: <Enhanced SpeedStep Frequency Control> on cpu19
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est19 attach returned 6
> p4tcc19: <CPU Frequency Thermal Control> on cpu19
> est20: <Enhanced SpeedStep Frequency Control> on cpu20
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est20 attach returned 6
> p4tcc20: <CPU Frequency Thermal Control> on cpu20
> est21: <Enhanced SpeedStep Frequency Control> on cpu21
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est21 attach returned 6
> p4tcc21: <CPU Frequency Thermal Control> on cpu21
> est22: <Enhanced SpeedStep Frequency Control> on cpu22
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est22 attach returned 6
> p4tcc22: <CPU Frequency Thermal Control> on cpu22
> est23: <Enhanced SpeedStep Frequency Control> on cpu23
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est23 attach returned 6
> p4tcc23: <CPU Frequency Thermal Control> on cpu23
> est24: <Enhanced SpeedStep Frequency Control> on cpu24
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est24 attach returned 6
> p4tcc24: <CPU Frequency Thermal Control> on cpu24
> est25: <Enhanced SpeedStep Frequency Control> on cpu25
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est25 attach returned 6
> p4tcc25: <CPU Frequency Thermal Control> on cpu25
> est26: <Enhanced SpeedStep Frequency Control> on cpu26
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est26 attach returned 6
> p4tcc26: <CPU Frequency Thermal Control> on cpu26
> est27: <Enhanced SpeedStep Frequency Control> on cpu27
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est27 attach returned 6
> p4tcc27: <CPU Frequency Thermal Control> on cpu27
> est28: <Enhanced SpeedStep Frequency Control> on cpu28
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est28 attach returned 6
> p4tcc28: <CPU Frequency Thermal Control> on cpu28
> est29: <Enhanced SpeedStep Frequency Control> on cpu29
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est29 attach returned 6
> p4tcc29: <CPU Frequency Thermal Control> on cpu29
> est30: <Enhanced SpeedStep Frequency Control> on cpu30
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est30 attach returned 6
> p4tcc30: <CPU Frequency Thermal Control> on cpu30
> est31: <Enhanced SpeedStep Frequency Control> on cpu31
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 24d400001f00
> device_attach: est31 attach returned 6
> p4tcc31: <CPU Frequency Thermal Control> on cpu31
> Timecounters tick every 1.000 msec
> usbus0: 480Mbps High Speed USB v2.0
> usbus1: 12Mbps Full Speed USB v1.0
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
> ugen1.1: <0x103c> at usbus1
> uhub1: <0x103c UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> usbus2: 480Mbps High Speed USB v2.0
> ugen2.1: <Intel> at usbus2
> uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
> uhub1: 2 ports with 2 removable, self powered
> uhub0: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> ugen1.2: <HP> at usbus1
> ukbd0: <Virtual Keyboard > on usbus1
> (probe0:ciss0:0:0:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0
> (probe0:ciss0:0:0:0): CAM status: SCSI Status Error
> (probe0:ciss0:0:0:0): SCSI status: Check Condition
> (probe0:ciss0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid 
> command operation code)
> kbd2 at ukbd0
> ums0: <Virtual Mouse> on usbus1
> da0 at ciss0 bus 0 scbus0 target 0 lun 0
> da0: <COMPAQ RAID 0  VOLUME OK> Fixed Direct Access SCSI-5 device
> da0: 135.168MB/s transfers
> da0: Command Queueing enabled
> da0: 286070MB (585871964 512 byte sectors: 255H 32S/T 65535C)
> cd0 at ata3 bus 0 scbus3 target 0 lun 0
> cd0: <HP DV-W28S-W G.W3> Removable CD-ROM SCSI-0 device
> cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
> cd0: Attempt to query device size failed: NOT READY, Medium not present 
> - tray closed



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120223041516.GI6861>