Date: Sat, 30 Sep 2000 12:49:53 +0200 (SAST) From: David Tucker <davet@uunet.co.za> To: freebsd-questions@FreeBSD.ORG Subject: CS8241 soundcard help Message-ID: <Pine.BSF.4.21.0009301249300.63202-100000@hill.noc.uunet.co.za>
next in thread | raw e-mail | index | archive | help
Hi there
i am running 4.1.1 and and am struggling to get my Crystal sound card
working. The machine sees the card when it boots but does not recognise
it (It says unknown card). Any help would appreciated as I have been
working for a while to try get this card working.
Here is the output from my dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1.1-STABLE #1: Fri Sep 29 15:18:29 SAST 2000
davet@one.fw.uunet.co.za:/usr/src/sys/compile/ONE
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 433250691 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (433.25-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 100597760 (98240K bytes)
avail memory = 95072256 (92844K bytes)
Preloaded elf kernel "kernel" at 0xc02be000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GZ graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 10
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at
device 7.3 on pci0
pci0: <unknown card> (vendor=0x1013, dev=0x6005) at 9.0 irq 5
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xe400-0xe43f mem
0xe8000000-0xe80fffff,0xe8111000-0xe8111fff irq 9 at device 10.0 on pci0
fxp0: Ethernet address 00:90:27:90:7b:a9
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ppi0: <Parallel I/O> on ppbus0
ad0: 4112MB <WDC WD43AA> [8355/16/63] at ata0-master using UDMA33
Mounting root from ufs:/dev/ad0s1a
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 10
at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
sb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Output from pcinfo -l
chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03
hdr=0x00
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03
hdr=0x01
isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02
hdr=0x00
atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086
rev=0x01 hdr=0x00
uhci0@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01
hdr=0x00
chip1@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02
hdr=0x00
none0@pci0:9:0: class=0x040100 card=0x00000000 chip=0x60051013 rev=0x01
hdr=0x00
fxp0@pci0:10:0: class=0x020000 card=0x000c8086 chip=0x12298086 rev=0x08
hdr=0x00
none1@pci1:0:0: class=0x030000 card=0x00881002 chip=0x475a1002 rev=0x7a
hdr=0x00
And the relavant part of my kernal config
device pcm
device pcm0
device csa
device csa0
----------------------------------------------------------------------------
David Tucker I know nothing, except what everyone
UUNET SA knows, if there Grace dances, I should
Network Operations dance - W.H. Auden
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0009301249300.63202-100000>