Date: Fri, 7 Oct 2016 21:59:35 -0400 From: Peter Garshtja <peter.garshtja@ambient-md.com> To: freebsd-arm@freebsd.org Subject: Re: RPI2 AP Message-ID: <3684c340-3020-31f7-64f1-babf90be8565@ambient-md.com> In-Reply-To: <CAJ-VmokBzS8ejzgnriKgDFBmq7FL5e7L2j5_BbsJwrkxyQ-hbA@mail.gmail.com> References: <CALFUBVFrV%2BNjSwSHNXqW3KeAgREHrifjr2rRr2BQaCAC_vgyvA@mail.gmail.com> <CAJ-VmokBzS8ejzgnriKgDFBmq7FL5e7L2j5_BbsJwrkxyQ-hbA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Greetings,
Here is uname - 11.0-RELEASE-p1 FreeBSD 11.0-RELEASE-p1 #0 r306544M
Below is dmesg
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RELEASE-p1 #0 r306544M: Fri Sep 30 18:26:52 EDT 2016
ptg@rpi2:/root/crochet/work/obj/arm.armv6/usr/src/sys/RPI2 arm
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on
LLVM 3.8.0)
VT: init without driver.
sema_sysinit
CPU: Cortex A7 rev 5 (Cortex-A core)
Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
WB enabled LABT branch prediction disabled
LoUU:2 LoC:3 LoUIS:2
Cache level 1:
32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
32KB/32B 2-way instruction cache Read-Alloc
Cache level 2:
512KB/64B 8-way unified cache WB Read-Alloc Write-Alloc
real memory = 989851648 (943 MB)
avail memory = 956411904 (912 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> mem 0x3f000000-0x3fffffff
on ofwbus0
local_intc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on
simplebus0
generic_timer0: <ARMv7 Generic Timer> on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
intc0: <BCM2835 Interrupt Controller> mem 0xb200-0xb3ff on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x10001c-0x100027 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x200000-0x2000af on simplebus0
gpio0: read-only pins: 46,48-53.
gpio0: reserved pins: 48-53.
gpiobus0: <OFW GPIO bus> on gpio0
gpioled0: <GPIO led> at pin 35 on gpiobus0
gpioled1: <GPIO led> at pin 47 on gpiobus0
gpioc0: <GPIO controller> on gpio0
iichb0: <BCM2708/2835 BSC controller> mem 0x205000-0x20501f on simplebus0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iichb1: <BCM2708/2835 BSC controller> mem 0x804000-0x80401f on simplebus0
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
spi0: <BCM2708/2835 SPI controller> mem 0x204000-0x20401f on simplebus0
spibus0: <OFW SPI bus> on spi0
bcm_dma0: <BCM2835 DMA Controller> mem 0x7000-0x7fff,0xe05000-0xe05fff
on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0xb880-0xb8bf on simplebus0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x300000-0x3000ff on
simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
uart0: <PrimeCell UART (PL011)> mem 0x201000-0x201fff on simplebus0
uart0: console (115200,n,8,1)
vchiq0: <BCM2835 VCHIQ> mem 0xb800-0xb84f on simplebus0
vchiq: local ver 8 (min 3), remote ver 8.
pcm0: <VCHIQ audio> on vchiq0
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem
0x980000-0x99ffff on simplebus0
usbus0 on bcm283x_dwcotg0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
fb0: <BCM2835 VT framebuffer driver> on ofwbus0
fbd0 on fb0
VT: initialize with new VT driver "fb".
fb0: 1680x1050(1680x1050@0,0) 24bpp
fb0: fbswap: 1, pitch 5040, base 0x3d384000, screen_size 5322240
cryptosoft0: <software crypto>
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <DWCOTG> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 8GB <SDHC SL08G 8.0 SN 2948251B MFG 08/2015 by 3 SD> at mmc0
41.6MHz/4bit/65535-block
bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF
Release APs
Trying to mount root from ufs:/dev/mmcsd0s2a [rw,noatime]...
WARNING: / was not properly dismounted
warning: no time-of-day clock registered, system time will not be set
accurately
uhub0: 1 port with 1 removable, self powered
ugen0.2: <vendor 0x0424> at usbus0
uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2>
on usbus0
uhub1: MTT enabled
uhub1: 5 ports with 4 removable, self powered
random: unblocking device.
ugen0.3: <vendor 0x0424> at usbus0
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: b8:27:eb:f2:8e:4e
ugen0.4: <Realtek> at usbus0
bridge0: Ethernet address: 02:fd:a6:82:73:00
ue0: changing name to 'mgmt'
smsc0: chip 0xec00, rev. 0002
mgmt: link state changed to DOWN
vlan0: changing name to 'wan'
vlan1: changing name to 'lan'
mgmt: link state changed to UP
lan: link state changed to UP
wan: link state changed to UP
urtwn0: <Realtek 802.11n NIC, class 0/0, rev 2.00/0.00, addr 4> on usbus0
*urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R
*urtwn0: enabling 11n
mgmt: link state changed to DOWN
lan: link state changed to DOWN
wan: link state changed to DOWN
mgmt: link state changed to UP
lan: link state changed to UP
wan: link state changed to UP
ieee80211_load_module: load the wlan_amrr module by hand for now.
wlan0: Ethernet address: 00:c6:d2:21:c9:34
wlan0: promiscuous mode enabled
bridge0: link state changed to UP
pflog0: promiscuous mode enabled
mgmt: promiscuous mode enabled
lan: promiscuous mode enabled
Thanks in advance,
Peter
On 10/7/2016 4:36 PM, Adrian Chadd wrote:
> + freebsd-wireless
>
> can you post a 'dmesg' output? That way we can see which urtwn NIC it
> is and whether it logged anything.
>
>
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3684c340-3020-31f7-64f1-babf90be8565>