Date: Sat, 10 Jul 2004 16:32:46 +0100 From: "Sarunas V." <vsarunas@eircom.net> To: freebsd-current@freebsd.org Subject: Problems with i82077, NE72065 or clone floppy drive controllers (Was: i need my floppy disk drive.) Message-ID: <20040710153246.GA746@laserbeam.sv.org> In-Reply-To: <200407091513.48539.h@llorien.org> References: <200407091513.48539.h@llorien.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 15:13, Fri 09 Jul 04, h wrote: [snip] > basically i can't mount my floppy drive. with ACPI on my kernel couldn't even > detect the floppy controller. ever since i removed acpi now my kernel sees > the controller: > > # dmesg|grep fd > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port > 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > > but the fd0 or fdc0 isn't in /dev, there's only a fd/ dir: > > ls /dev/f* > 0 1 2 I have the same floppy drive. On current(yesterday's), when booting with ACPI, I get the following message: fdc0: I/O to control range incorrect But when booting without ACPI, I get: fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 So I can mount it with no problem. This problem exists definitely from 5.2 release, maybe earlier. Full dmesg with ACPI enabled is at: http://homepage.eircom.net/~sarunas/dmesg/dmesg_with_acpi Verbose dmesg with ACPI enabled: http://homepage.eircom.net/~sarunas/dmesg/dmesg_with_acpi_verbose dmesg with no ACPI: http://homepage.eircom.net/~sarunas/dmesg/dmesg_no_acpi Verbose dmesg with no ACPI: http://homepage.eircom.net/~sarunas/dmesg/dmesg_no_acpi_verbose [snip] Kind Regards, -- Sarunas Vancevicius (vsarunas AT eircom DOT NET)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040710153246.GA746>