Date: Mon, 15 Apr 1996 19:49:00 -0400 From: Andrew Herdman <andrew@whine.com> To: questions@freebsd.org Subject: Problems with ATAPI CDROM and 2.2-960323-SNAP Message-ID: <Pine.BSF.3.91.960415194524.1068A-100000@why>
next in thread | raw e-mail | index | archive | help
I just upgraded my system at work with 2.2-960323-SNAP from
2.1.0-RELEASE. I rebuilt the kernel with the same file the 2.1.0 kernel
was built, and now it does not probe for the CDROM on boot up. Is there
a new way to enter the wcd0 line in the config file? Or did ATAPI
support die in this version? Here is both my kernel config and a dmesg.
The cdrom is on the first IDE bus.
-----------------------------------------------------------------------------
machine "i386"
cpu "I586_CPU"
ident GHOUL
maxusers 10
options "SYSVSHM"
options "SYSVSEM"
options "SYSVMSG"
options "COMPAT_LINUX" #Linux Emulator
options "LINUX" #Linux Emulator in Kernel
options "INET" #InterNETworking
options "FFS" #Berkeley Fast Filesystem
options "NFS" #Network Filesystem
options "MSDOSFS" #MSDOS Filesystem
options "CD9660" #ISO 9660 Filesystem
options "PROCFS" #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3
options "UCONSOLE" #X console support
options "FAT_CURSOR" #block cursor in syscons or pccons
options "BOUNCE_BUFFERS" #include support for DMA bounce
buffers
options "NCONS=5" #5 Virtual Consoles
options "NSWAPDEV=5" #Allow for 5 Swap Devices
options "DUMMY_NOPS" #disable extra delays
options "KTRACE" #enable Kernel Tracing
options "CHILD_MAX=128" #128 Children Processes
options "OPEN_MAX=128" #128 File descriptors
options "ATAPI" #Enable ATAPI support for IDE bus
config kernel root on wd0 swap on wd0
controller isa0
controller pci0
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
disk fd0 at fdc0 drive 0
disk wd0 at wdc0 drive 0 flags 0x80ff
disk wd1 at wdc1 drive 0 flags 0x80ff
device wcd0
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
device ep0 at isa? port 0x210 net irq 12 vector epintr
device ep1 at isa? port 0x300 net irq 10 vector epintr
pseudo-device loop
pseudo-device ether
pseudo-device log
pseudo-device bpfilter 3
pseudo-device pty 32
pseudo-device gzip
pseudo-device vn
pseudo-device snp 5
pseudo-device tun 2
------------------------------------------------------------------------------
FreeBSD 2.2-960323-SNAP #1: Mon Apr 15 16:54:14 EDT 1996
andrew@ghoul.uunet.ca:/usr/src/sys/compile/GHOUL
CPU: Pentium (99.46-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
avail memory = 30732288 (30012K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82437 (Triton) PCI cache memory controller> rev 2 on pci0:0
chip1 <Intel 82371 (Triton) PCI-ISA bridge> rev 2 on pci0:7
piix0 <Intel 82371 (Triton) Bus-master IDE controller> rev 2 on pci0:7
vga0 <VGA-compatible display device> rev 3 on pci0:12
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <ST51080A>, 32-bit, multi-block-32
wd0: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (wd1): <ST51080A>, 32-bit, multi-block-32
wd1: 1033MB (2116800 sectors), 2100 cyls, 16 heads, 63 S/T, 512 B/S
2 3C5x9 board(s) on ISA found at 0x210 0x300
ep0 at 0x210-0x21f irq 12 on isa
ep0: aui/utp/bnc[*UTP*] address 00:a0:24:28:6a:2e
ep1 at 0x300-0x30f irq 10 on isa
ep1: aui/utp[*UTP*] address 00:a0:24:5d:da:2f
npx0 on motherboard
npx0: INT 16 interface
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.960415194524.1068A-100000>