From owner-freebsd-bugs Thu Apr 29 5:40:54 1999 Delivered-To: freebsd-bugs@freebsd.org Received: from freefall.freebsd.org (freefall.FreeBSD.ORG [204.216.27.21]) by hub.freebsd.org (Postfix) with ESMTP id 0971F15158 for ; Thu, 29 Apr 1999 05:40:01 -0700 (PDT) (envelope-from gnats@FreeBSD.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.9.3/8.9.2) id FAA53144; Thu, 29 Apr 1999 05:40:01 -0700 (PDT) (envelope-from gnats@FreeBSD.org) Received: from dcarmich.xnet.com (dcarmich.xnet.com [205.243.153.129]) by hub.freebsd.org (Postfix) with ESMTP id BF1C314C3E for ; Thu, 29 Apr 1999 05:31:02 -0700 (PDT) (envelope-from dcarmich@dcarmich.xnet.com) Received: (from dcarmich@localhost) by dcarmich.xnet.com (8.9.2/8.9.2) id TAA00753; Thu, 29 Apr 1999 19:44:54 -0500 (CDT) (envelope-from dcarmich) Message-Id: <199904300044.TAA00753@dcarmich.xnet.com> Date: Thu, 29 Apr 1999 19:44:54 -0500 (CDT) From: dcarmich@xnet.com Reply-To: dcarmich@xnet.com To: FreeBSD-gnats-submit@freebsd.org X-Send-Pr-Version: 3.2 Subject: kern/11380: PAO3 can't recognize a USR/Megahertz PCMCIA modem on an NEC Versa LX laptop Sender: owner-freebsd-bugs@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >Number: 11380 >Category: kern >Synopsis: PAO3 won't recognize a USR/Megahertz PCMCIA modem >Confidential: no >Severity: critical >Priority: high >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Thu Apr 29 05:40:00 PDT 1999 >Closed-Date: >Last-Modified: >Originator: Douglas Carmichael >Release: FreeBSD 3.1-RELEASE i386 >Organization: none >Environment: NEC Versa LX laptop with 3.1-RELEASE and PAO3-19990329-beta. Kernel configuration: machine "i386" cpu "I686_CPU" ident DCARMICH-FIXED maxusers 48 options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options UCONSOLE #Allow users to grab the console # If your laptop have not had Windoze95-Ready BIOS, please update it. # Such old BIOS'es sometimes have critical bugs at 32-bit protected # mode APM BIOS interface (which have not used by Windoze 3.1). # PC-card suspend/resume support (experimental) #options APM_PCCARD_RESUME options PCIC_RESUME_RESET # Keep power for serial cards when the system suspends # (If your machine hangs up when you try to suspend the system with # FAX/Modem PCMCIA card, uncomment this option). #options SIO_SUSP_KEEP_PWR # Detach SCSI devices when the SCSI card is removed #options SCSI_DETACH # Detach ATAPI devices when the ATA card is removed options ATAPI_DETACH # Japanese version of WaveLAN PCMCIA uses 2.4GHz band instead of 915MHz # band that US version uses. If you want to use Japanese version of # WaveLAN, uncomment this line, or edit the corresponding config entry # of /etc/pccard.conf. #options "WAVELAN_PCMCIA_24" # Suspend the system when the battery status is "Low" #options "APM_BATT_LOW_SUSPEND" # If you want to use NTP on laptop machines, uncomment the following # option. Current APM implementation affects NTP client. #options "APM_NO_CLOCK_ADJUST" # Some X-servers cannot survive suspend/resume on laptop. # This option kicks her when the system is resumed from suspended mode. #options SYSCONS_VTY_RESUME config kernel root on wd0 controller isa0 controller pci0 # Dont remove these two lines! pseudo-device card 1 # You must use "flags 0x1" when you don't hear any negotiation noise(?) # if you use modem card, or pccardd doesn't read cis tuple, tell you # 'No card in database for"(null)"("(null)")' in case of Cirrus Logic's # pcic is your PC. device pcic0 at isa? port 0x3e0 flags 0x1 irq 11 #device pcic0 at isa? port 0x3e4 irq 11 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 controller wdc1 at isa? port "IO_WD2" bio irq 15 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM device wfd0 #IDE floppy (LS-120) # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Mandatory, don't remove device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? # Advanced Power Management #options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS device sio0 at isa? port "IO_COM1" tty irq 4 device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? net irq 7 controller ppbus0 device nlpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? #controller vpo0 at ppbus? pseudo-device loop pseudo-device sl 1 # DHCP uses BPF (Berkeley Packet Filter) pseudo-device bpfilter 4 # ijppp uses tun instead of ppp device pseudo-device vn 1 pseudo-device tun 4 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. #options KTRACE #kernel tracing # This provides support for System V shared memory. # options SYSVSHM options SYSVSEM options SYSVMSG # USB support #controller uhci0 #controller ohci0 #controller usb0 # # for the moment we have to specify the priorities of the device # drivers explicitly by the ordering in the list below. This will # be changed in the future. # #device ums0 #device ukbd0 #device ulpt0 #device uhub0 #device ucom0 #device umodem0 #device hid0 #device ugen0 # #options USB_DEBUG #options USBVERBOSE dmesg output: Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.1-RELEASE #4: Sun Apr 25 07:51:00 CDT 1999 root@myname.my.domain:/usr/src/sys/compile/DCARMICH Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Xeon/Celeron (233.29-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x650 Stepping=0 Features=0x183f9ff> real memory = 100663296 (98304K bytes) avail memory = 95416320 (93180K bytes) Preloaded elf kernel "kernel" at 0xf0245000. Probing for devices on PCI bus 0: chip0: rev 0x02 on pci0.0.0 vga0: rev 0xdc int a irq 10 on pci0.2.0 pcic0: rev 0x02 int a irq 255 on pci0.3.0 RL5C4XX PCI Config Reg: pcic1: rev 0x02 int b irq 255 on pci0.3.1 RL5C4XX PCI Config Reg: chip1: rev 0x02 on pci0.7.0 ide_pci0: rev 0x01 on pci0.7.1 chip2: rev 0x02 on pci0.7.3 Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 not found at 0x3f8 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 2067MB (4233600 sectors), 4200 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): , removable, accel, dma, iordis acd0: drive speed 4134KB/sec, 128KB cache acd0: supported read types: CD-R, CD-RW, CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked ppc0 at 0x378 irq 7 on isa ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold nlpt0: on ppbus 0 nlpt0: Interrupt-driven port ppi0: on ppbus 0 plip0: on ppbus 0 pcic0 at 0x3e0-0x3e1 irq 11 flags 0x1 on isa PC-Card ctlr(0) Ricoh RL5C478 [CardBus bridge mode] (5 mem & 2 I/O windows) pcic0: slot 0 controller I/O address 0x3e0 pcic0: slot 1 controller I/O address 0x3e0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface apm0 on isa apm: found APM BIOS version 1.2 changing root device to wd0s1a Card inserted, slot 0 sio3: type 16550A sio3: unload,gone Return IRQ=4 Card removed, slot 0 Card inserted, slot 0 Slot 0, unfielded interrupt (0) sio3: type 16550A sio3: unload,gone Return IRQ=4 Card removed, slot 0 Card inserted, slot 0 Slot 0, unfielded interrupt (0) sio3: type 16550A sio3: unload,gone Return IRQ=4 Card removed, slot 0 Card inserted, slot 0 Slot 0, unfielded interrupt (0) sio3: type 16550A sio3: unload,gone Return IRQ=4 Card removed, slot 0 pccard.conf: # PC-card sample configuration file # Tatsumi Hosokawa # # Removing all IRQ conflicts from this file can't be done because of some # IRQ-selfish PC-cards. So if you want to use some of these cards in # your machine, you will be forced to modify their IRQ parameters from # the following list. # # $Id: pccard.conf.sample,v 1.1.1.1.2.10.2.6.2.21.2.18 1999/03/17 14:29:45 toshi Exp $ # Generally available IO ports io 0x240-0x3ff # Generally available IRQs (DEPRECATED, USE OF THE OPTION IS DISCOURAGED) #irq 10 11 # Unavailable IRQs #ignirq 9 # refrain from using SoundBlaster's IRQ, by default. ignirq 5 3 # it may be helful for most of notebook PCs #ignirq 15 # Available memory slots memory 0xd4000 96k #----------------------------------------------------------------------- # Were not for special reasons, please add new entries at the top of # this file when you wrote new entries for unsupported cards. # And, if you succeed using new unsupported cards, please e-mail me # the new entries. # Tatsumi Hosokawa #----------------------------------------------------------------------- # ......... for unsupported cards ......... #----------------------------------------------------------------------- # Fast Ethernet Cards #----------------------------------------------------------------------- # PLANEX (PLANET) FNW-3600-T card "Fast Ethernet" "Adapter" config 0x1 "ed0" any insert logger -s PLANEX FNW-3600-T inserted insert /etc/pccard_ether $device remove logger -s PLANEX FNW-3600-T removed remove /etc/pccard_ether_remove $device # Laneed LD-10/100CD card "Laneed" "LD-10/100CD" config default "ed0" any insert logger -s Laneed LD-10/100CD inserted insert /etc/pccard_ether $device remove logger -s Laneed LD-10/100CD removed remove /etc/pccard_ether_remove $device # Linksys EtherFast 10/100 PC Card (NE2000 Compatible) card "Linksys" "EtherFast 10/100 PC Card \(PCMPC100\)" config default "ed0" any insert logger -s Linksys EtherFast 10/100 inserted insert /etc/pccard_ether $device remove logger -s Linksys EtherFast 10/100 removed remove /etc/pccard_ether_remove $device # Logitec LPM-LN100TX 100BASE-TX Ethernet LAN CARD card "Logitec" "LPM-LN100TX" config default "ed0" any insert logger -s Logitec LPM-LN100TX Ethernet inserted insert /etc/pccard_ether $device remove logger -s Logitec LPM-LN100TX Ethernet removed remove /etc/pccard_ether_remove $device # BayNetworks NETGEAR FA410TXC Fast Ethernet card "NETGEAR" "FA410TX" "Fast Ethernet" config default "ed0" any insert logger -s NETGEAR FA410TX inserted insert /etc/pccard_ether $device remove logger -s NETGEAR FA410TX removed remove /etc/pccard_ether_remove $device # Telecom Device SuperSocket RE550T card "Telecom Device K\.K\." "SuperSocket RE550T" config default "ed0" any insert logger -s Telecom Device SuperSocket RE550T inserted insert /etc/pccard_ether $device remove logger -s Telecom Device SuperSocket RE550T removed remove /etc/pccard_ether_remove $device # ONTEC LN-2221 10/100 Ethernet Adapter card "ONTEC & SMC" "LN-2221 Ethernet PCCard" config default "sn0" any insert logger -s ONTEC LN-2221 Ethernet inserted insert /etc/pccard_ether $device remove logger -s ONTEC LN-2221 Ethernet removed remove /etc/pccard_ether_remove $device # COREGA FastEther PCC-TX card "corega K.K." "corega FastEther PCC-TX" config default "ed0" any insert logger -s Corega FastEther PCC-TX inserted insert /etc/pccard_ether $device remove logger -s Corega FastEther PCC-TX removed remove /etc/pccard_ether_remove $device # I/O DATA PCET/TX card "IO DATA" "PCETTX" config default "ed0" any insert logger -s IO-DATA PCET/TX inserted insert /etc/pccard_ether $device remove logger -s IO-DATA PCET/TX removed remove /etc/pccard_ether_remove $device # CyQ've ELA-110 card "CyQ've" "ELA-110 10/100M LAN Card" config default "ed0" any insert logger -s "CyQ've ELA-100 10/100M LAN card inserted" insert /etc/pccard_ether $device remove logger -s "CyQ've ELA-100 10/100M LAN card removed" remove /etc/pccard_ether_remove $device # D-Link DFE-650 Ethernet Card card "D-Link" "DFE-650" config default "ed0" any 0x10 insert logger -s D-link DFE-650 inserted insert /etc/pccard_ether $device remove logger -s D-link DFE-650 removed remove /etc/pccard_ether_remove $device # MELCO LPC-TX card "MELCO/SMC" "LPC-TX" config default "sn0" any ether 0x4a 00:a0:dc insert logger -s MELCO/SMC LPC-TX inserted insert /etc/pccard_ether $device remove logger -s MELCO/SMC LPC-TX removed remove /etc/pccard_ether_remove $device #----------------------------------------------------------------------- # Ethernet Cards #----------------------------------------------------------------------- #IBM PCMCIA Ethernet I/II, RIOS PC CARD II ETHERNET card "IBM Corp\." "Ethernet" config default "ed0" any ether 0xff0 # 08:00:5a 00:04:ac 00:06:29 insert logger -s IBM PCMCIA Ethernet inserted insert /etc/pccard_ether $device remove logger -s IBM PCMCIA Ethernet removed remove /etc/pccard_ether_remove $device # Planet Smart COM 2000, Melco LPC-T card "PCMCIA" "UE2212" config default "ed0" any 0x10 ether 0xff0 00:00:e8 insert logger -s Planet Smart COM 2000 inserted insert /etc/pccard_ether $device remove logger -s Planet Smart COM 2000 removed remove /etc/pccard_ether_remove $device # Accton EN2212 card "ACCTON" "EN2212" config default "ed0" any 0x30 ether 0xff0 00:00:e8 insert logger -s Accton EN2212 inserted insert /etc/pccard_ether $device remove logger -s Accton EN2212 removed remove /etc/pccard_ether_remove $device # Planet Communications Ethernet Card ENW-3501-T card "IC-CARD+" "IC-CARD+" config default "ed0" any 0x10 insert logger -s Planet ENW-3501-T inserted insert /etc/pccard_ether $device remove logger -s Planet ENW-3501-T removed remove /etc/pccard_ether_remove $device # Planet Smart COM 3500, IC-Card Ethernet, SYSCOM SC100 Ethernet Card card "IC-CARD" "IC-CARD" config default "ed0" any 0x20 # config default "ed0" any 0x10 insert logger -s Planet Smart Com 3500 inserted insert /etc/pccard_ether $device remove logger -s Planet Smart Com 3500 removed remove /etc/pccard_ether_remove $device # 3Com Etherlink III 3C589, 3C589B, 3C589C, 3C589D card "3Com Corporation" "3C589" config default "ep0" any insert logger -s 3Com Etherlink III inserted insert /etc/pccard_ether $device remove logger -s 3Com Etherlink III removed remove /etc/pccard_ether_remove $device # 3Com Megahertz 3CXE589ET card "3Com" "Megahertz 589E" config default "ep0" any insert logger -s 3Com Megahertz 3C589E inserted insert /etc/pccard_ether $device remove logger -s 3Com Megahertz 3C589E removed remove /etc/pccard_ether_remove $device # Farallon EtherMac card "Farallon" "ENet" config default "ep0" any insert logger -s Farallon EtherMac inserted insert /etc/pccard_ether $device remove logger -s Farallon EtherMac removed remove /etc/pccard_ether_remove $device # Fujitsu FMV-J181 card "PCMCIA MBH10302" "01" config 0xc "fe0" any insert logger -s Fujitsu FMV-J181 inserted insert /etc/pccard_ether $device remove logger -s Fujitsu FMV-J181 removed remove /etc/pccard_ether_remove $device # NextCom J Link NC5310 card "NextComK\.K\." "NC5310 Ver1\.0.*" config 0x14 "fe0" any # config 0x1a "fe0" any insert logger -s NextCom J Link NC5310 inserted insert /etc/pccard_ether $device remove logger -s NextCom J Link NC5310 removed remove /etc/pccard_ether_remove $device # HITACHI HT-4840-11 card "HITACHI" "HT-4840-11" config 0x1a "fe0" any insert logger -s HITACHI HT-4840-11 inserted insert /etc/pccard_ether $device remove logger -s HITACHI HT-4840-11 removed remove /etc/pccard_ether_remove $device # CONTEC C-NET(PC)C Ethernet card "CONTEC Co\.,Ltd\." "C-NET\(PC\)C.*" config default "fe0" any ether 0x58 00:80:4c insert logger -s CONTEC C-NET inserted insert /etc/pccard_ether $device remove logger -s CONTEC C-NET removed remove /etc/pccard_ether_remove $device # TDK LAC-CD021, LAC-CD021A card "TDK" "LAC-CD02x" config default "fe0" any # These cards have same ID strings, and different MAC address # locations. ether 0x92 00:80:98 # LAC-CD021, LAC-021A ether 0x96 00:80:98 # LAC-CD021BX insert logger -s TDK LAC-CD021 inserted insert /etc/pccard_ether $device remove logger -s TDK LAC-CD021 removed remove /etc/pccard_ether_remove $device # Fujitsu FMV-J182, FMV-J182A card "FUJITSU" "LAN Card\(FMV-J182\)" config 0x32 "fe0" any # These cards have same ID strings, and different MAC address # locations. ether 0xf2c 00:00:0e #FMV-J182 ether 0x1cc 00:00:0e #FMV-J182A insert logger -s Fujitsu FMV-J182 inserted insert /etc/pccard_ether $device remove logger -s Fujitsu FMV-J182 removed remove /etc/pccard_ether_remove $device # Megahertz X-Jack Ethernet CC10BT/2 card "Megahertz" "CC10BT/2" config default "sn0" any ether attr2hex 00:00:86 insert logger -s Megahertz X-Jack Ethernet inserted insert /etc/pccard_ether $device remove logger -s Megahertz X-Jack Ethernet removed remove /etc/pccard_ether_remove $device # Megahertz Ethernet Adapter card "Megahertz" "ETHERNET ADAPTOR" config default "sn0" any ether attr2hex 00:00:86 insert logger -s Megahertz Ethernet inserted insert /etc/pccard_ether $device remove logger -s Megahertz Ethernet removed remove /etc/pccard_ether_remove $device # Dayna Communications CommuniCard E card "Dayna Communications, Inc\." "CommuniCard E" config default "ed0" any 0x10 ether 0x110 00:80:19 insert logger -s Dayna CommuniCard inserted insert /etc/pccard_ether $device remove logger -s Dayna CommuniCard remove remove /etc/pccard_ether_remove $device # GVC NIC-2000P Ethernet Card card "GVC" "NIC-2000p" config default "ed0" any 0x10 insert logger -s GVC NIC-200P inserted insert /etc/pccard_ether $device remove logger -s GVC NIC-200P removed remove /etc/pccard_ether_remove $device # No-brand NE-2000 compatible card card "PCMCIA" "ETHERNET V1.0" config default "ed0" any 0x10 ether 0xff0 # MAC address field should be filled insert logger -s PCMCIA ETHERNET V1.0 inserted insert /etc/pccard_ether $device remove logger -s PCMCIA ETHERNET V1.0 removed remove /etc/pccard_ether_remove $device # Eiger Labs Ethernet COMBO card "EIGER Labs Inc\." "Ethernet COMBO Card" config default "ed0" any 0x10 insert logger -s Eiger Labs Ethernet COMBO inserted insert /etc/pccard_ether $device remove logger -s Eiger Labs Ethernet COMBO inserted remove /etc/pccard_ether_remove $device # D-Link DE-650 Ethernet Card card "D-Link" "DE-650" config default "ed0" any 0x10 # New models of DE650 has no ether MAC address definition in CIS tupples. # If you have an older one, please uncomment the following line. # ether 0x40 00:80:c8 insert logger -s D-link DE-650 inserted insert /etc/pccard_ether $device remove logger -s D-link DE-650 removed remove /etc/pccard_ether_remove $device # National Semiconductor InfoMover 4100 card "National Semiconductor" "InfoMover 4100" config default "ed0" any ether 0xff0 08:00:17 insert logger -s National Semiconductor InfoMover inserted insert /etc/pccard_ether $device remove logger -s National Semiconductor InfoMover removed remove /etc/pccard_ether_remove $device # Accton EN2216 EtherCard card "ACCTON" "EN2216-PCMCIA-ETHERNET" config 0x22 "ed0" any 0x10 ether 0x1c0 00:00:e8 insert /etc/pccard_ether $device insert logger -s Accton EN2216 inserted remove /etc/pccard_ether_remove $device remove logger -s Accton EN2216 removed # Accton UE2216 Ethernet OEM card "PCMCIA" "PCMCIA-ETHERNET-CARD" config 0x22 "ed0" any 0x10 ether 0x1c0 00:00:e8 insert logger -s Accton UE2216 Ethernet inserted insert /etc/pccard_ether $device remove logger -s Accton UE2216 Ethernet removed remove /etc/pccard_ether_remove $device # NDC Instant-Link card "NDC" "Ethernet" config default "ed0" any 0x30 insert logger -s NDC Instant-Link inserted insert /etc/pccard_ether $device remove logger -s NDC Instant-Link removed remove /etc/pccard_ether_remove $device # Laneed PCMCIA Ethernet card. ELECOM LD-CDWA (DP83902A) card "MACNICA" "ME1-JEIDA" config default "ed0" any ether 0xb8 08:00:42 insert logger -s MACNICA PCMCIA Ethernet inserted insert /etc/pccard_ether $device remove logger -s MACNICA PCMCIA Ethernet removed remove /etc/pccard_ether_remove $device # Digital DEPCM-BA Ethernet card "DIGITAL" "DEPCM-XX" config default "ed0" any 0x10 insert logger -s Digital DEPCM-BA Ethernet inserted insert /etc/pccard_ether $device remove logger -s Digital DEPCM-BA Ethernet removed remove /etc/pccard_ether_remove $device # Matsushita Electric Industrial Co.,LTD. CF-VEL211P-B card "Matsushita Electric Industrial Co.,LTD." "CF-VEL211" config default "ed0" any ether 0xff0 00:80:45 insert logger -s Panasonic CF-VEL211 inserted insert /etc/pccard_ether $device remove logger -s Panasonic CF-VEL211 removed remove /etc/pccard_ether_remove $device # ADDTRON EP-210A card "EP-210 PCMCIA LAN CARD\." ".*" config default "ed0" any 0x10 ether 0x110 00:40:33 insert logger -s ADDTRON EP-210A inserted insert /etc/pccard_ether $device remove logger -s ADDTRON EP-210A removed remove /etc/pccard_ether_remove $device # PreMax PE-200 Ethernet Card card "PMX " "PE-200" config default "ed0" any 0x10 ether 0x7f0 00:20:e0 insert logger -s PREMAX PE-200 inserted insert /etc/pccard_ether $device remove logger -s PREMAX PE-200 removed remove /etc/pccard_ether_remove $device # No-brand NE2000 compatible card (FCC ID: LXLC1LANTB) card " " "Ethernet Combo card" config default "ed0" any 0x10 insert logger -s NE2000 compatible card inserted insert /etc/pccard_ether $device remove logger -s NE2000 compatible card removed remove /etc/pccard_ether_remove $device # RATOC REX-5588 (now testing...) card "PCMCIA LAN MBH10304 ES" " 01" # Kouji Yamamoto reported that # following entry worked with his REX-5588, but the card I borrowed # has no such config index on CIS tupple. Minor version problem? # # config 0x3a "fe0" 5 # ether 0x328 00:c0:d0 # # I tried to drive it by following entry on my DHU II, but it does # not work! # # config 0x1f "fe0" any config 0x3a "fe0" any # config 0x38 "fe0" any ether 0x32c 00:c0:d0 # many minor revs.... ether 0x328 00:c0:d0 ether 0x200 00:c0:d0 insert logger -s RATOC REX-5588 Ethernet inserted insert /etc/pccard_ether $device remove logger -s RATOC REX-5588 Ethernet removed remove /etc/pccard_ether_remove $device # SCM Ethernet Combo (*Not SMC :-)*) card "SCM" "Ethernet Combo card" config default "ed0" any 0x10 ether 0xff0 00:20:cb insert logger -s SCM Ethernet card inserted insert /etc/pccard_ether $device remove logger -s SCM Ethernet card removed remove /etc/pccard_ether_remove $device # Linksys Combo PCMCIA Ethernet Card card "LINKSYS" "E-CARD" config default "ed0" any 0x10 insert logger -s Linksys Combo Ethernet inserted insert /etc/pccard_ether $device remove logger -s Linksys Combo Ethernet removed remove /etc/pccard_ether_remove $device # Linksys Combo PCMCIA Ethernet Card card "Linksys" "Combo PCMCIA EthernetCard \(EC2T\)" config default "ed0" any 0x10 insert logger -s Linksys PCMCIA Ethernet inserted insert /etc/pccard_ether $device remove logger -s Linksys PCMCIA Ethernet removed remove /etc/pccard_ether_remove $device # I/O DATA PCLA/T card "I-O DATA" "PCLA" config default "ed0" any 0x10 ether 0x1c0 00:a0:b0 ether 0xff0 00:a0:b0 insert logger -s I-O DATA PCLA/T Ethernet inserted insert /etc/pccard_ether $device remove logger -s I-O DATA PCLA/T Ethernet removed remove /etc/pccard_ether_remove $device # I/O DATA PCLA/TE card "IO DATA" "PCLATE" config default "ed0" any 0x10 insert logger -s I-O DATA PCLA/TE Ethernet inserted insert /etc/pccard_ether $device remove logger -s I-O DATA PCLA/TE Ethernet removed remove /etc/pccard_ether_remove $device # Fujitsu Towa LA501 Ethernet card "FUJITSU TOWA" "LA501" config 0x29 "fe1" any 0x10 ether 0x332 00:00:0e insert logger -s Fujitsu Towa LA501 Ethernet inserted insert /etc/pccard_ether $device remove logger -s Fujitsu Towa LA501 Ethernet removed remove /etc/pccard_ether_remove $device # Grey Cell GCS2220 Ethernet Card card "Grey Cell" "GCS2220" config default "ed0" any 0x10 insert logger -s Grey Cell GCS2220 inserted insert /etc/pccard_ether $device remove logger -s Grey Cell GCS2220 removed remove /etc/pccard_ether_remove $device # Epson EEN10B Ethernet Card card "Seiko Epson Corp\." "Ethernet" config default "ed0" any 0x10 ether 0xff0 00:00:48 insert logger -s Epson EEN10B Ethernet Card inserted insert /etc/pccard_ether $device remove logger -s Epson EEN10B Ethernet Card removed remove /etc/pccard_ether_remove $device # COREGA Ethernet Card card "Corega,K\.K\." "\(Ethernet LAN Card\)" config default "ed0" any ether 0xff0 00:00:f4 insert logger -s Corega Ethernet inserted insert /etc/pccard_ether $device remove logger -s Corega Ethernet removed remove /etc/pccard_ether_remove $device # COREGA Ether PCC-T card "corega K.K." "corega Ether PCC-T" config default "ed0" any insert logger -s Corega Ether PCC-T inserted insert /etc/pccard_ether $device remove logger -s Corega Ether PCC-T removed remove /etc/pccard_ether_remove $device # Telecom Device SuperSocket RE450T card "Ethernet" "Adapter" config 0x3 "ed0" any # There's another minor revision of this card that has no MAC address in # CIS tupple. This revision does not require "ether" definition. If you # have it, please comment out the following line. ether 0x110 00:e0:98 # Please note that if the log message says that the MAC address of the # card is 00:00:00:00:00:00, please uncomment the "ether" definition again # and set it to proper value. insert logger -s Telecom Device SuperSocket RE450T inserted insert /etc/pccard_ether $device remove logger -s Telecom Device SuperSocket RE450T removed remove /etc/pccard_ether_remove $device # Telecom Device SuperSocket RE450T card "Telecom Device K.K." "SuperSocket RE450T" config default "ed0" any insert logger -s Telecom Device SuperSocket RE450T inserted insert /etc/pccard_ether $device remove logger -s Telecom Device SuperSocket RE450T removed remove /etc/pccard_ether_remove $device # RPTI EP401 Ethernet NE2000 compatible card "RPTI" "EP401 Ethernet NE2000 Compatible" config default "ed0" any insert logger -s RPTI EP401 Ethernet inserted insert /etc/pccard_ether $device remove logger -s RPTI EP401 Ethernet removed remove /etc/pccard_ether_remove $device # Nihon Unisys, Ltd. JPF0400-LAN card "Nihon Unisys, Ltd." "JPF0400-LAN" config default "ed0" any ether 0xff0 00:80:45 insert logger -s Nihon Unisys JPF0400-LAN inserted insert /etc/pccard_ether $device remove logger -s Nihon Unisys JPF0400-LAN removed remove /etc/pccard_ether_remove $device # Nihon Unisys, Ltd. JPF0400-ETH card "Nihon Unisys, Ltd." "JPF0400-ETH" config default "ed0" any ether 0xff0 00:80:45 insert logger -s Nihon Unisys JPF0400-ETH inserted insert /etc/pccard_ether $device remove logger -s Nihon Unisys JPF0400-ETH removed remove /etc/pccard_ether_remove $device # SURECOM EtherPerfect EP-427 Adapter card "TAMARACK" "Ethernet" config default "ed0" any ether attr2hex 00:47:43 insert logger -s SURECOM EtherPerfect EP-427 inserted insert /etc/pccard_ether $device remove logger -s SURECOM EtherPerfect EP-427 removed remove /etc/pccard_ether_remove $device # RATOC REX-R280 card "RATOC System Inc\." "10BASE_T CARD R280" config 0x3a "fe0" any ether 0x1fc 00:c0:d0 insert logger -s RATOC REX-R280 inserted insert /etc/pccard_ether $device remove logger -s RATOC REX-R280 removed remove /etc/pccard_ether_remove $device # D-Link DE-660 Ethernet Card card "D-Link" "DE-660" config default "ed0" any 0x10 insert logger -s D-link DE-660 inserted insert /etc/pccard_ether $device remove logger -s D-link DE-660 removed remove /etc/pccard_ether_remove $device # Allied Telesis Ethernet Card card "Allied Telesis,K\.K" "Ethernet LAN Card" config default "ed0" any 0x10 ether 0xff0 00:00:f4 insert logger -s Allied Telesis Ethernet Card inserted insert /etc/pccard_ether $device remove logger -s Allied Telesis Ethernet Card removed remove /etc/pccard_ether_remove $device # Toshiba Joho System PTJ-LAN/T card "TJ" "Ethernet" config default "ed0" any 0x10 insert logger -s TJ Ethernet card inserted insert /etc/pccard_ether $device remove logger -s TJ Ethernet card removed remove /etc/pccard_ether_remove $device # NextCom Next Hawk Etherneet Adapter card "NextCom K.K." "Next Hawk" config default "ed0" any insert logger -s NextCom Next Hawk Ethernet inserted insert /etc/pccard_ether $device remove logger -s NextCom Next Hawk Ethernet removed remove /etc/pccard_ether_remove $device # Logitec LPM-LN20T card "Logitec" "LPM-LN20T" config default "ed0" any insert logger -s Logitec LPM-LN20T inserted insert /etc/pccard_ether $device insert logger -s Logitec LPM-LN20T removed remove /etc/pccard_ether_remove $device # CentreCOM LA-PCM V2 card "Allied Telesis, K\.K\." "CentreCOM LA-PCM_V2" config 0x20 "ed0" any 0x10 insert logger -s CentreCOM LA-PCM V2 inserted insert /etc/pccard_ether $device remove logger -s CentreCOM LA-PCM V2 removed remove /etc/pccard_ether_remove $device # Map Japan MPL-972 card "2408LAN" "Ethernet" config default "ed0" any insert logger -s Map Japan MPL-972 inserted insert /etc/pccard_ether $device remove logger -s Map Japan MPL-972 removed remove /etc/pccard_ether_remove $device # EXPsys PCMCIA Ethernet Combo, Relia PCMCIA Ethernet card "PCMCIA LAN" "Ethernet" config default "ed0" any insert logger -s EXPsys Ethernet inserted insert /etc/pccard_ether $device remove logger -s EXPsys Ethernet removed remove /etc/pccard_ether_remove $device # CyQ've ELA-010 10BASE-T LAN Card card "CyQ've" "ELA-010" config default "ed0" any 0x10 insert logger -s CyQ\'ve ELA-010 LAN card inserted insert /etc/pccard_ether $device remove logger -s CyQ\'ve ELA-010 LAN card removed remove /etc/pccard_ether_remove $device # Billionton LNT-10TB card "Billionton" "LNT-10TB" config 0x20 "ed0" any insert logger -s Billionton LNT-10TB inserted. insert /etc/pccard_ether $device remove logger -s Billionton LNT-10TB removed. remove /etc/pccard_ether_remove $device # MELCO LPC2-T card "MELCO" "LPC2-T" config default "ed0" any insert logger -s MELCO LPC2-T inserted insert /etc/pccard_ether $device remove logger -s MELCO LPC2-T removed remove /etc/pccard_ether_remove $device # CNet PCMCIA PowerNIC CN40BC(BT) card "CNet" "CN40BC Ethernet" config default "ed0" any 0x10 insert logger -s CNet CN40BC inserted insert /etc/pccard_ether $device remove logger -s CNet CN40BC removed remove /etc/pccard_ether_remove $device # Kingston KNE-PCM/x Ethernet card "Kingston Technology Corp\." "EtheRx PC Card Ethernet.*" config default "ed0" any ether 0xff0 00:c0:f0 insert logger -s Kingston KNE-PCM/x Ethernet inserted insert /etc/pccard_ether $device remove logger -s Kingston KNE-PCM/x Ethernet removed remove /etc/pccard_ether_remove $device # NEC PC-9801N-J12 card "NEC" "PC-9801N-J12" config default "ed0" any ether 0xff0 00:00:4c insert logger -s NEC PC-9801N-J12 inserted insert /etc/pccard_ether $device remove logger -s NEC PC-9801N-J12 removed remove /etc/pccard_ether_remove $device #----------------------------------------------------------------------- # Modem Cards #----------------------------------------------------------------------- # Most of modem cards does not match these definitions. Please read # "wildcard entries" listed at the end of this file. #----------------------------------------------------------------------- # Omron MD24XCA FAX/Data Modem card "OMRON Corp\." "MD24XCA" config auto "sio3" pio reset 10000 insert logger -s OMRON MD24XCA Modem inserted remove logger -s OMRON MD24XCA Modem removed #----------------------------------------------------------------------- # ISDN Serial Cards #----------------------------------------------------------------------- # NTT-IT ThunderCard card "NTT Intelligent Technology Co., Ltd." "ThunderCard DD128" config auto "sio3" any 0x80 reset 1000 insert logger -s NTT-IT Thunder-card inserted remove logger -s NTT-IT Thunder-card removed #----------------------------------------------------------------------- # Digital Cellular Cards #----------------------------------------------------------------------- # NTT DoCoMo DATA/FAX Adapter card "NTT DoCoMo" "PCMCIA DATA/FAX.*" config auto "sio3" any 0x82 insert logger -s NTT DoCoMo DATA/FAX Adapter inserted remove logger -s NTT DoCoMo DATA/FAX Adapter removed # NTT DoCoMo Mobile D Card 96P1 card "NTT DoCoMo" "Mobile D Card 96P1" config auto "sio3" any 0x82 insert logger -s NTT DoCoMo Mobile D Card 96P1 Adapter inserted remove logger -s NTT DoCoMo Mobile D Card 96P1 Adapter removed #----------------------------------------------------------------------- # PHS Digital Communication Cards #----------------------------------------------------------------------- # NTT Personal Paldio Data/Fax Card DC-1S card "NTT Personal" "Paldio Data/Fax Card" "DC-1S" config auto "sio3" any 0x40000 insert logger -s NTT Personal Paldio Data/Fax Card DC-1S inserted remove logger -s NTT Personal Paldio Data/Fax Card DC-1S removed # NTT DoCoMo (formerly NTT Personal) Paldio 321S card "NTT Personal" "32K Paldio 321S PC CARD" config auto "sio3" any 0x40000 insert logger -s NTT Personal Paldio 321S PC Card inserted remove logger -s NTT Personal Paldio 321S PC Card removed #----------------------------------------------------------------------- # Misc. Serial Cards #----------------------------------------------------------------------- # Panasonic FM-RADIO card card "Panasonic" "CF-JVR101" config auto "sio3" pio insert logger -s Panasonic FM radio card inserted remove logger -s Panasonic FM radio card removed #----------------------------------------------------------------------- # SCSI Cards #----------------------------------------------------------------------- # Adaptec SlimSCSI card "Adaptec, Inc\." "APA-1460.*" config default "aic0" any insert logger -s Adaptec Slim SCSI inserted remove logger -s Adaptec Slim SCSI removed # New Media Corporation BASICS SCSI # (Do not put this entry under Bustoaster) card "BASICS by New Media Corporation" "SCSI Sym53C500" config 0x14 "ncv0" any insert logger -s New Media BASICS SCSI inserted remove logger -s New Media BASICS SCSI removed # NewMedia Bustoaster SCSI card "New Media" "SCSI" config 0x22 "aic0" any insert logger -s New Media Bus Toaster inserted remove logger -s New Media Bus Toaster removed # RATOC REX-5536AM, REX-9836A, ICM PSC-2401 SCSI # (Don't put this entry under REX5535 series!) # There's a buggy revision of this card which has broken CIS tupples. # if you can't use this card, please use the point enabler. (for example, # type "pccardc enabler 0 stg0 -a 0x4140 -i 5" from root command prompt) card "PCMCIA SCSI MBH10404" "01" config 0x37 "stg0" any insert logger -s RATOC REX-5536AM SCSI inserted remove logger -s RATOC REX-5536AM SCSI removed # RATOC REX-5535AC, REX-5535X, REX-9835X, REX-9835Z SCSI card "PCMCIA SCSI MBH1040" "01" config 0x3a "spc0" any insert logger -s RATOC REX-5535 SCSI inserted remove logger -s RATOC REX-5535 SCSI removed # RATOC REX-5536M card "PCMCIA SCSI2 CARD" "01" config 0x5 "stg0" any 0 insert logger -s RATOC REX-5536M SCSI inserted remove logger -s RATOC REX-5536M SCSI removed # RATOC REX-5536, Melco IFC-SC card "1195 RATOC System Inc\." "REX5536 SCSI2 CARD" config 0x7 "stg0" any 0 insert logger -s RATOC REX-5536 SCSI inserted remove logger -s RATOC REX-5536 SCSI removed # RATOC REX-9530 card "RATOC System Inc." "SCSI2 CARD.*" config default "ncv0" any 0x84d00000 insert logger -s RATOC REX-9530 SCSI inserted remove logger -s RATOC REX-9530 SCSI removed # IO DATA PCSC-DV # Macnica Miracle SCSI mPS100 card "MACNICA" "MIRACLE SCSI" "mPS100" "D.0" config 0x11 "ncv0" any 0xb6250000 insert logger -s MACNICA Miracle SCSI inserted remove logger -s MACNICA Miracle SCSI removed # Macnica Miracle SCSI-II mPS110 card "MACNICA" "MIRACLE SCSI-II mPS110" config 0x15 "ncv0" any 0 insert logger -s MACNICA Miracle SCSI-II inserted remove logger -s MACNICA Miracle SCSI-II removed # IBM SCSI PCMCIA Card card "IBM Corp\." "SCSI PCMCIA Card" config default "stg0" any insert logger -s IBM SCSI PCMCIA Card inserted remove logger -s IBM SCSI PCMCIA Card removed # Future Domain SCSI2GO card "Future Domain Corporation" "SCSI PCMCIA Credit Card Controller" config default "stg0" any insert logger -s Future Domain SCSI2GO inserted remove logger -s Future Domain SCSI2GO removed # KME (TAXAN ICD-400PN, etc.) card "KME" "KXLC002" config 0x26 "ncv0" any 0xb4d00000 insert logger -s KME SCSI PCMCIA Card inserted remove logger -s KME SCSI PCMCIA Card removed # Qlogic Fast SCSI card "QLOGIC CORPORATION" "pc05" config 0x2f "ncv0" any 0x84d00000 insert logger -s Qlogic Fast SCSI inserted remove logger -s Qlogic Fast SCSI removed # Media Intelligent SCSI-2 PC Card MSC-200 card "EPSON" "SCSI-2 PC Card SC200" config 0x12 "ncv0" any insert logger -s EPSON SCSI-2 PC Card MSC200 inserted remove logger -s EPSON SCSI-2 PC Card MSC200 removed # NEC PC-9801N-J03R card "NEC" "PC-9801N-J03R" config 0x15 "ncv0" any 0 insert logger -s NEC PC-9801N-J03R inserted remove logger -s NEC PC-9801N-J03R removed # NEC PC-9801N-J03 # (Don't put this entry previous to NEC PC-9801N-J03R) card "NEC" "PC-9801N-J03" config 0x15 "ncv0" any 0xb6000000 # (port 0x330 is used for MPU401 on Toshiba Libretto60) # config 0x11 "ncv0" any 0xb6000000 insert logger -s PC-9801N-J03 inserted remove logger -s PC-9801N-J03 removed # WORKBIT Ninja SCSI series card "WBT" "NinjaSCSI-3" config default "nin0" any insert logger -s Workbit NinjaSCSI-3 inserted remove logger -s Workbit NinjaSCSI-3 removed # Fujitsu Towa Electron SC501 SCSI (RATOC REX-5535 OEM) card "FUJITSU TOWA" "SC501" config 0x3a "spc0" any insert logger -s Fujitsu Towa SC501 SCSI inserted remove logger -s Fujitsu Towa SC501 SCSI removed #------------------------ untested ---------------------------- #------------------------ untested ---------------------------- # If these entry do not work, try other config index than default. # Please e-mail me whether it works or not. Thanks # Tatsumi Hosokawa card "MIDORI ELECTRONICS.*" "CN-SC43.*" config default "ncv0" any 0x80100000 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp card "EIger Labs" "PCMCIA-to-SCSI Adapter" config default "ncv0" any insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp card "SCSI PCMCIA Adapter Card" ".*" config 0x20 "stg0" any insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp card " SIMPLE TECHNOLOGY Corporation" "SCSI PCMCIA Credit Card Controller" config default "stg0" any insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp card "KME" "KXLC003" config 0x26 "ncv0" any 0xb4d00000 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp #----------------------------------------------------------------------- # ATAPI CD-ROM Cards #----------------------------------------------------------------------- # IO Data CBIDE (bundled with CDP-FX24, etc.) card "WIT" "IDE16" config default "wdc1" any insert logger -s IO Data CBIDE inserted remove logger -s IO Data CBIDE removed # DHU Mobile Media CD-ROM # (no hotplug support) card "Digital Equipment Corporation\." "Digital Mobile Media CD-ROM" config 0xb "wdc1" 15 # Caravelle PSC-IDE 6x ATAPI CD-ROM card "Caravelle" "PSC-IDE " config 0x2a "wdc1" any 0x1 insert logger -s Caravelle PSC-IDE card inserted remove logger -s Caravelle PSC-IDE card removed # IBM Portable 4X Speed CD-ROM Drive CD-400 card "IBM" "PCMCIA CD-ROM Drive CD-400" config 0x1 "wdc1" any 0x1000 cardio 0x250 0x20 insert logger -s IBM PCMCIA CD-ROM CD-400 inserted remove logger -s IBM PCMCIA CD-ROM CD-400 removed # IO Data PCIDEII (bundled with CDP-TX10, etc.) card "IO DATA" "PCIDEII" config default "wdc1" any insert logger -s IO Data PCIDEII inserted remove logger -s IO Data PCIDEII removed # IBM CD-20XSeries(IDE PC Card) card "IBM" "PCMCIA Portable CD-ROM Drive" config 0x1 "wdc1" any 0x1000 cardio 0x250 0x20 insert logger -s IBM CD-20XS inserted remove logger -s IBM CD-20XS removed # NOVAC Station Series card "PCMCIA" "CD-ROM" config default "wdc1" any insert logger -s Novac Station CD-ROM inserted remove logger -s Novac Station CD-ROM removed #----------------------------------------------------------------------- # Flash ATA Cards #----------------------------------------------------------------------- # SunDisk Flash ATA card "SunDisk" ".*" config 0x03 "wdc1" any insert logger -s SunDisk Flash ATA inserted remove logger -s SunDisk Flash ATA removed # Midori Elec. Flash ATA card "Midori Elec\." ".*FLASH.*" config 0x03 "wdc1" any insert logger -s Midori Flash ATA inserted remove logger -s Midori Flash ATA removed #----------------------------------------------------------------------- # ATA HDD Cards #----------------------------------------------------------------------- card "Maxtor" "MXL.*" config 0x03 "wdc1" any insert logger -s Maxtor ATA HDD inserted remove logger -s Maxtor ATA HDD removed #----------------------------------------------------------------------- # ATA External HDD Adapters #----------------------------------------------------------------------- # Greystone Diskdock card "GREYSTONE PERIPHERAL DISKDOCK" ".*" config default "wdc1" any insert logger -s Greystone Diskdock inserted remove logger -s Greystone Diskdock removed # card "INTEGRAL PERIPHERALS" "ATA CARD" config default "wdc1" any insert logger -s Integral Peripherals inserted remove logger -s Integral Peripherals removed # DATAFAB PCMMD2 card "DATAFAB" "PCMCIA-TO-IDE" config 0x1 "wdc1" any insert logger -s DATAFAB PCMMD2 inserted remove logger -s DATAFAB PCMMD2 removed # PCM250AM 2.5in HDD adapter card "PC CARD MANUFACTURER" "PCMCIA ATA/ATAPI Adapter" config 0xd "wdc1" any insert logger -s PCM250AM inserted remove logger -s PCM250AM removed # Sicon Peripheral PCMCIA ATA/ATAPI Adapter card "Sicon Peripheral" "PCMCIA ATA/ATAPI Adapter" config default "wdc1" any insert logger -s Sicon Peripherals inserted remove logger -s Sicon Peripherals removed # Microtech XpressDock card "Microtech International Inc\." "IDE PCCARD" config default "wdc1" any 0x2000 cardio 0x170 0x10 insert logger -s Microtech XpressDock inserted remove logger -s Microtech XpressDock removed #----------------------------------------------------------------------- # ATAPI LS120 Super Floppy Disk #----------------------------------------------------------------------- # LK-RM120 card "Panasonic" "LMEK0406" config 0x22 "wdc1" any 0x1 insert logger -s Panasonic LMEK0406 inserted remove logger -s Panasonic LMEK0406 removed #----------------------------------------------------------------------- # ATAPI ZIP Drive #----------------------------------------------------------------------- # CitiDISK & Addonics PocketZIP card "Shining" "PMIDE-ASC" config default "wdc1" any 0x2000 insert logger -s CitiDISK/PocketZIP inserted remove logger -s CitiDISK/PocketZIP removed #----------------------------------------------------------------------- # # Ongoing Projects ---- These entries are for ongoing projects of # our package. Most of these entries do not work. # #----------------------------------------------------------------------- #----------------------------------------------------------------------- # Sound cards #----------------------------------------------------------------------- # RATOC REX-5570 Sound Card card "1195 RATOC System Inc\." "REX5570 SOUND CARD" config default "opl0" any #----------------------------------------------------------------------- # Multifunction cards #----------------------------------------------------------------------- # Multifunction card support is still under development. If you want # to use them as modem only in conservative way, uncomment "modem-only" # definitions, comment-out multifunction definitions, and recompile # pccardd and kernel without MULTIFUNC option. (see # PAO-dir/usr.sbin/pccard/pccardd and PAO config file for details) # Tatsumi Hosokawa # APEX DATA MultiCard (as Modem only) card "APEX DATA" "MULTICARD" config 0xb "sio3" any insert logger -s APEX DATA MultiCard inserted as Modem remove logger -s APEX DATA MultiCard removed # Megahertz multifunction card: # The second multifunction definition does not work (under development). # if you want to use this card as modem, uncomment the first one. # Megahertz X-Jack Ethernet/Modem 14.4K (as Modem only) card "Megahertz" "XJEM1144/CCEM1144" config 0x27 "sio3" any insert logger -s Megahertz X-Jack Multifunction Card inserted as Modem. remove logger -s Megahertz X-Jack Multifunction Card removed. # Megahertz X-Jack Ethernet/Modem 14.4K #card "MEGAHERTZ" "XJEM1144/CCEM1144" # multifunc # config default "sn0" any # config 0x27 "sio3" shared # insert logger -s Megahertz X-Jack Multifunction Card inserted # remove logger -s Megahertz X-Jack Multifunction Card removed # TDK Multifunctioon Card (as Modem) card "TDK" "GlobalNetworker 3410/3412" config default "sio3" any insert logger -s TDK Multifunction Card inserted as Modem remove logger -s TDK Multifunction Card removed # Toshiba Modem/LAN card IPC5001B card "TOSHIBA" "Modem/LAN Card" config 0x25 "sio3" any insert logger -s TOSHIBA IPC5001B Multifunction Card inserted as Modem remove logger -s TOSHIBA IPC5001B Multifunction Card removed # Motorola Marine multifunction card (as modem) card "Motorola, Inc\." "MARINER MODEM/FAX/LAN" config 0x35 "sio3" any insert logger -s Motorola Marine inserted as Modem remove logger -s Motorola Marine removed # Xircom CreditCard Ethernet 10/100+ Modem 56 (as modem) card "Xircom" "CreditCard Ethernet" config 0x27 "sio3" any insert logger -s Xircom CEM56 Card inserted as Modem remove logger -s Xircom CEM56 Card removed # Intel EtherExpress(TM) PRO/100 LAN/Modem PC Card Adapter (as modem) card "Intel" "EtherExpress\(TM\) PRO/100 LAN/Modem PC Card Adapter" config 0x1f "sio3" any insert logger -s Intel EtherExpress PRO/100 LAN/Modem as Modem remove logger -s Intel EtherExpress PRO/100 LAN/Modem # RATOC REX-5572 (as SCSI only) card "RATOC System Inc\." "SOUND/SCSI2 CARD.*" config default "ncv0" any 0x84d00000 cardio 0x640 0x10 insert logger -s RATOC SOUND/SCSI2 REX-5572 inserted as SCSI remove logger -s RATOC SOUND/SCSI2 REX-5572 removed # IO DATA PCMF144/20 (as Flash ATA only) card "IO DATA" "ATA&MODEM" config 0x7 "wdc1" any insert logger -s IO DATA PCMF144/20 inserted as ATA remove logger -s IO DATA PCMF144/20 removed # Telecom Device SuperSocket LM336 (as Ethernet only) card "PCMCIAs" "LanModem" config default "ed0" any insert logger -s SuperSocket LM336 inserted as Ethernet insert /etc/pccard_ether $device remove logger -s SuperSocket LM336 removed remove /etc/pccard_ether_remove $device #----------------------------------------------------------------------- # Wireless LAN #----------------------------------------------------------------------- # NCR Wavelan PCMCIA # If you want to use Japanese version, uncomment the second config # line and comment-out the first line. card "NCR" "WaveLAN/PCMCIA" config default "wlp0" any # US version (915MHz) # config default "wlp0" any 0x01 # Japanese version (2.4GHz) ether wavelan insert logger -s NCR WaveLAN PCMCIA inserted insert /etc/pccard_ether $device remove logger -s NCR WaveLAN PCMCIA removed remove /etc/pccard_ether_remove $device # AT&T GIS Wavelan PCMCIA # If you want to use Japanese version, uncomment the second config # line and comment-out the first line. card "AT&T" "WaveLAN/PCMCIA" config default "wlp0" any # US version (915MHz) # config default "wlp0" any 0x01 # Japanese version (2.4GHz) ether wavelan insert logger -s AT\&T WaveLAN PCMCIA inserted insert /etc/pccard_ether $device remove logger -s AT\&T WaveLAN PCMCIA removed remove /etc/pccard_ether_remove $device # Digital RoamAbout/DS card "Digital" "RoamAbout/DS" config default "wlp0" any ether wavelan insert logger -s Digital RoamAbout/DS inserted insert /etc/pccard_ether $device remove logger -s Digital RoamAbout/DS removed remove /etc/pccard_ether_remove $device # NetWave AirSurfer # NOTE: For some machines, wait cycle for memory access is required. # you should change "0x40" on the last part of "cardmem" line to "0x44", # like: # cardmem 0xd4000 0x20000 0x9000 0x44 # IBM ThinkPads are known to require this change. card "Xircom" "CreditCard Netwave" config 0x01 "cnw0" any cardmem 0xd4000 0x20000 0x9000 0x40 # config 0x01 "cnw1" any # cardmem 0xdd000 0x20000 0x9000 0x40 ether 0x126 00:80:c7 00:20:d8 insert logger -s Netwave Ethernet inserted insert /etc/pccard_ether $device remove logger -s Netwave Ethernet removed remove /etc/pccard_ether_remove $device # Victor M-MOIL CARD card "JVC" "MiniMoil Ethernet Card" config 0x01 "sn0" any insert logger -s MiniMoil Ethernet inserted insert /etc/pccard_ether $device remove logger -s MiniMoil Ethernet removed remove /etc/pccard_ether_remove $device #----------------------------------------------------------------------- # Video Capture Cards #----------------------------------------------------------------------- # IBM Smart Capture Card card "IBM Corp\." "Video Capture" config default "scc0" pio cardmem 0xd4000 0x0 0x8000 insert logger -s Smart Capture Card inserted remove logger -s Smart Capture Card removed #----------------------------------------------------------------------- # Speech Synthesizer Cards #----------------------------------------------------------------------- # Hitachi microcomputer speech synthesizer card card "HITACHI MICROCOMPUTER SYSTEM LTD." "MSSHVPC02" config default "hss0" pio insert logger -s Hitachi microcomputer speech synthesizer inserted remove logger -s Hitachi microcomputer speech synthesizer removed #----------------------------------------------------------------------- # Joystick Port Cards #----------------------------------------------------------------------- card "IO DATA" "PCJOY" config default "joy0" pio # config 0x1 "joy0" pio # config 0x2 "joy0" pio insert logger -s IO DATA PCJOY inserted remove logger -s IO DATA PCJOY removed #----------------------------------------------------------------------- # Floppy Drive Cards #----------------------------------------------------------------------- # Libretto floppy drive. card "Y-E DATA" "External FDD" config 0x4 "fdc1" any insert logger -s Y-E DATA External FDD inserted remove logger -s Y-E DATA External FDD removed # ------------------------------------------------------------------- # # Experimental ---- If you have one of them, please e-mail me *WHETHER # IT WORKS OR NOT*. I wrote these entries by reading Linux PCMCIA driver # package. I've not tested them. I need results of your experiences. # Especially, if the ed_probe() is succeeded, it does not always mean # that probed MAC address is correct. If you have or if your friend # has these cards, send me the result of the results of # # pccardc dumpcis # and # pccardc rdattr 0 0 1000 (the first 0 means slot number) # # of these cards. I can write more accurate pccard.conf entries if I # can read these result. # # I NEED YOUR HELP!!!! # # Thanks. # # My e-mail address is hosokawa@jp.FreeBSD.org (Tatsumi Hosokawa) # # ------------------------------------------------------------------- #----------------------------------------------------------------------- # Ethernet Cards #----------------------------------------------------------------------- # CNet CN30BC Ethernet Card card "CNet.*" "CN30BC" config default "ed0" any 0x10 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # DataTrek NetCard card "DataTrek\." "NetCard" config default "ed0" any 0x10 ether 0xff0 00:20:e8 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # D-Link DE-650 Ethernet Card card ".*D-Link PC Ethernet Card.*" ".*" config default "ed0" any 0x10 ether 0x40 00:80:c8 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # D-Link DE-650 Ethernet Card card ".*" ".*D-Link PC Ethernet Card.*" config default "ed0" any 0x10 ether 0x40 00:80:c8 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # Edimax Ethernet Combo card "Edimax Technology Inc\." "PCMCIA" config default "ed0" any 0x10 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # EP-210 Ethernet Card card "Ethernet PCMCIA adapter" "EP-210" config default "ed0" any 0x10 ether 0x110 00:40:33 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # Katron PE-520 Ethernet Card card "KCI" "PE520 PCMCIA Ethernet Adapter" config default "ed0" any 0x10 ether 0x110 00:40:f6 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # Linksys Ethernet Card card ".*E-CARD PC Ethernet Card.*" ".*" config default "ed0" any 0x10 insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # Linksys Ethernet Card card ".*" ".*E-CARD PC Ethernet Card.*" config default "ed0" any 0x10 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # Linksys Ethernet Card card "E-CARD" "E-CARD" config default "ed0" any 0x10 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # Maxtech PCN2000 Ethernet card "MAXTECH" "PCN2000" config default "ed0" any 0x10 ether 0x5000 00:00:e8 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # NE2000 Compatible Ethernet Card card "NE2000 Compatible" "PCMCIA" config default "ed0" any 0x10 ether 0xff0 00:a0:0c insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # RPTI EP400 Ethernet Card card "RPTI LTD\." "EP400" config default "ed0" any 0x10 ether 0x110 00:40:95 insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # SMC EliteCard Ethernet card "SMC" "PCM Ethernet Adapter" config default "sn0" any ether attr2hex insert logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # Socket EA LAN Adapter # This card should not work because of its broken DMA status register, # if you have this card, please fix this bug. card "Socket Communications Inc" "Socket EA PCMCIA LAN.*" # This card has broken CIS tupples # We can't use "default" config 0x1 "ed0" any 0x30 ether 0x4000 00:c0:1b insert /etc/pccard_ether $device remove /etc/pccard_ether_remove $device # ------------------------------------------------------------------- # # "Wildcard" entries # # ------------------------------------------------------------------- # GENERIC PCMCIA modem function serial config auto "sio3" any # config 0x23 "sio3" any # alternative definitions # config 0x21 "sio3" any # ......... # config 0x22 "sio3" any # config 0x23 "sio3" pio # config 0x21 "sio3" pio # config 0x22 "sio3" pio # config 0x23 "sio3" 5 # config 0x21 "sio3" 5 # config 0x22 "sio3" 5 # reset 100 # default reset 1000 # safety reset time # reset 10000 # for unstable cards insert logger -s PCMCIA Modem inserted remove logger -s PCMCIA Modem removed # GENERIC Flash ATA / ATA HDD function fixed_disk # config default "wdc1" 15 # config default "wdc1" any # config 0x03 "wdc1" 15 config 0x03 "wdc1" any insert logger -s Flash ATA / ATA HDD inserted remove logger -s Flash ATA / ATA HDD removed And here's the output of "pccardc dumpcis": Code 128 not found Code 128 not found code Unknown ignored Code 131 not found Code 131 not found code Unknown ignored Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: 00 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = 512b, 1 units Tuple #2, code = 0x15 (Version 1 info), length = 50 000: 05 00 55 2e 53 2e 20 52 6f 62 6f 74 69 63 73 00 010: 58 4a 2f 43 43 31 35 36 30 00 4d 65 67 61 68 65 020: 72 74 7a 20 35 36 6b 62 70 73 20 4d 6f 64 65 6d 030: 00 ff Version = 5.0, Manuf = [U.S. Robotics], card vers = [XJ/CC1560] Addit. info = [Megahertz 56kbps Modem] Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 02 01 2f 00 PCMCIA ID = 0x102, OEM ID = 0x2f Tuple #4, code = 0x21 (Functional ID), length = 2 000: 02 01 Serial port/modem - POST initialize Tuple #5, code = 0x1a (Configuration map), length = 5 000: 01 23 00 03 03 Reg len = 2, config register addr = 0x300, last config = 0x23 Registers: XX------ Tuple #6, code = 0x1b (Configuration entry), length = 16 000: e0 41 99 49 55 3e 3d aa 60 f8 03 07 30 ff ff 28 Config index = 0x20(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Continuous supply current: 3.5 x 100mA Power down supply current: 3.5 x 10mA Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x3f8 block length = 0x8 IRQ modes: Level IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Max twin cards = 0 Misc attr: (Audio-BVD2) (Power down supported) Tuple #7, code = 0x1b (Configuration entry), length = 7 000: 21 08 aa 60 f8 02 07 Config index = 0x21 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x2f8 block length = 0x8 Tuple #8, code = 0x1b (Configuration entry), length = 7 000: 22 08 aa 60 e8 03 07 Config index = 0x22 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x3e8 block length = 0x8 Tuple #9, code = 0x1b (Configuration entry), length = 7 000: 23 08 aa 60 e8 02 07 Config index = 0x23 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x2e8 block length = 0x8 Tuple #10, code = 0x22 (Functional EXT), length = 4 000: 00 02 0f 7c Serial interface extension: 16550 UART, Parity - Space,Mark,Odd,Even Data bit - 7bit,8bit, Stop bit - 1bit,1.5bit,2bit Tuple #11, code = 0x22 (Functional EXT), length = 9 000: 01 1f 0f 00 06 00 00 06 00 Modem interface capabilities: Tuple #12, code = 0x22 (Functional EXT), length = 12 000: 02 06 00 3f 1c 03 03 0f 07 00 02 b5 Data modem services available: Tuple #13, code = 0x22 (Functional EXT), length = 8 000: 13 06 00 0f 00 02 00 b5 Fax1/modem services available: Tuple #14, code = 0x22 (Functional EXT), length = 8 000: 23 06 00 0f 00 02 00 b5 Fax2/modem services available: Tuple #15, code = 0x0 (Null tuple), length = 10 000: 02 01 2f 00 21 00 00 00 00 ff Tuple #16, code = 0x0 (Null tuple), length = 14 000: 31 30 36 47 31 36 52 38 32 4b 4d 57 00 ff Tuple #17, code = 0x14 (No link), length = 0 Tuple #18, code = 0xff (Terminator), length = 0 2 slots found And here's rc.conf: #!/bin/sh # # This is rc.conf - a file full of useful variables that you can set # to change the default startup behavior of your system. You should # not edit this file! Put any overrides into one of the ${rc_conf_files} # instead and you will be able to update these defaults later without # spamming your local configuration information. # # All arguments must be in double or single quotes. # # $Id: rc.conf,v 1.1 1999/02/09 22:15:18 jkh Exp $ ############################################################## ### Important initial Boot-time options ##################### ############################################################## swapfile="NO" # Set to name of swapfile if aux swapfile desired. apm_enable="YES" # Set to YES if you want APM enabled. pccard_enable="YES" # Set to YES if you want to configure PCCARD devices. pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. pccard_ether="ed0 ep0 sn0 fe0" pccard_beep="2" ifconfig_common="DHCP" ifconfig_ed0=$ifconfig_common ifconfig_ep0=$ifconfig_common ifconfig_sn0=$ifconfig_common ifconfig_fe0=$ifconfig_common local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs rc_conf_files="/etc/rc.conf /etc/rc.conf.local" ############################################################## ### Network configuration sub-section ###################### ############################################################## ### Basic network options: ### hostname="myname.my.domain" # Set this! nisdomainname="NO" # Set to NIS domain if using NIS (or NO). firewall_enable="NO" # Set to YES to enable firewall functionality firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) firewall_quiet="NO" # Set to YES to suppress rule display natd_enable="NO" # Enable natd (if firewall_enable == YES). natd_interface="fxp0" # Public interface to use with natd. natd_flags="" # Additional flags for natd. tcp_extensions="NO" # Disallow RFC1323 extensions (or YES). network_interfaces="lo0" # List of network interfaces (lo0 is loopback). ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. # # If you have any sppp(4) interfaces above, you might also want to set # the following parameters. Refer to spppcontrol(8) for their meaning. sppp_interfaces="" # List of sppp interfaces. #sppp_interfaces="isp0" # example: sppp over ISDN #spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" ### Network daemon (miscellaneous) & NFS options: ### syslogd_enable="YES" # Run syslog daemon (or NO). syslogd_flags="" # Flags to syslogd (if enabled). inetd_enable="YES" # Run the network daemon dispatcher (or NO). inetd_flags="" # Optional flags to inetd. # # named. It may be possible to run named in a sandbox, man security for # details. # named_enable="NO" # Run named, the DNS server (or NO). named_program="named" # path to named, if you want a different one. named_flags="" # Flags for named #named_flags="-u bind -g bind" # Flags for named kerberos_server_enable="NO" # Run a kerberos master server (or NO). kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on # a slave kerberos server kerberos_stash="" # Is the kerberos master key stashed? rwhod_enable="NO" # Run the rwho daemon (or NO). rwhod_flags="" # Flags for rwhod amd_enable="NO" # Run amd service with $amd_flags (or NO). amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map" amd_map_program="NO" # Can be set to "ypcat -k amd.master" nfs_client_enable="NO" # This host is an NFS client (or NO). nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). nfs_access_cache="2" # Client cache timeout in seconds nfs_server_enable="NO" # This host is an NFS server (or NO). nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). mountd_flags="-r" # Flags to mountd (if NFS server enabled). nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server. rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO). portmap_enable="YES" # Run the portmapper service (or NO). portmap_flags="" # Flags to portmap (if enabled). rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). keyserv_flags="" # Flags to keyserv (if enabled). rarpd_enable="NO" # Run rarpd (or NO). rarpd_flags="" # Flags to rarpd. xtend_enable="NO" # Run the X-10 power controller daemon. xtend_flags="" # Flags to xtend (if enabled). ### Network Time Services options: ### timed_enable="NO" # Run the time daemon (or NO). timed_flags="" # Flags to timed (if enabled). ntpdate_enable="NO" # Run the ntpdate to sync time (or NO). ntpdate_program="ntpdate" # path to ntpdate, if you want a different one. ntpdate_flags="" # Flags to ntpdate (if enabled). xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO). xntpd_program="xntpd" # path to xntpd, if you want a different one. xntpd_flags="-p /var/run/xntpd.pid" # Flags to xntpd (if enabled). # Network Information Services (NIS) options: ### nis_client_enable="NO" # We're an NIS client (or NO). nis_client_flags="" # Flags to ypbind (if enabled). nis_ypset_enable="NO" # Run ypset at boot time (or NO). nis_ypset_flags="" # Flags to ypset (if enabled). nis_server_enable="NO" # We're an NIS server (or NO). nis_server_flags="" # Flags to ypserv (if enabled). nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). ### Network routing options: ### defaultrouter="NO" # Set to default gateway (or NO). static_routes="" # Set to static route list (or leave empty). gateway_enable="NO" # Set to YES if this host will be a gateway. router_enable="NO" # Set to YES to enable a routing daemon. router="routed" # Name of routing daemon to use if enabled. router_flags="-q" # Flags for routing daemon. mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). mrouted_flags="" # Flags for multicast routing daemon. ipxgateway_enable="NO" # Set to YES to enable IPX routing. ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. ipxrouted_flags="" # Flags for IPX routing daemon. arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") accept_sourceroute="NO" # accept source routed packets to us ### ATM interface options: ### atm_enable="NO" # Configure ATM interfaces (or NO). #atm_netif_hea0="atm 1" # Network interfaces for physical interface. #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). #atm_macaddr_hea0="NO" # Override physical MAC address (or NO). #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). atm_pvcs="" # Set to PVC list (or leave empty). atm_arps="" # Set to permanent ARP list (or leave empty). ### ISDN interface options: ### isdn_enable="NO" # Enable the ISDN subsystem (or NO). isdn_fsdev="/dev/ttyv4" # Output device for fullscreen mode (or NO for daemon mode). isdn_flags="-dn -d0x1f9" # Flags for isdnd isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace ### Miscellaneous network options: ### icmp_bmcastecho="NO" # respond to broadcast ping packets ############################################################## ### System console options ################################# ############################################################## keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). keybell="NO" # bell to duration.pitch or normal or visual (or NO). keychange="NO" # function keys default values (or NO). cursor="NO" # cursor type {normal|blink|destructive} (or NO). scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). blanktime="300" # blank time (in seconds) or "NO" to turn it off. saver="NO" # screen saver: Uses /modules/${saver}_saver.ko moused_enable="YES" # Run the mouse daemon. moused_type="auto" # See man page for rc.conf(5) for available settings. moused_port="/dev/psm0" # Set to your mouse port. moused_flags="-3" # Any additional flags to moused. allscreens_flags="" # Set this vidcontrol mode for all virtual screens ############################################################## ### Miscellaneous administrative options ################### ############################################################## cron_enable="YES" # Run the periodic job daemon. lpd_enable="NO" # Run the line printer daemon. lpd_flags="" # Flags to lpd (if enabled). usbd_enable="NO" # Run the usbd daemon. usbd_flags="" # Flags to usbd (if enabled). sendmail_enable="YES" # Run the sendmail daemon (or NO). sendmail_flags="-bd -q30m" # -bd is pretty mandatory. dumpdev="NO" # Device name to crashdump to (if enabled). check_quotas="NO" # Check quotas (or NO). accounting_enable="NO" # Turn on process accounting (or NO). ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). linux_enable="NO" # Linux emulation loaded at startup (or NO). svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). clear_tmp_enable="NO" # Clear /tmp at startup. ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" # shared library search paths ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" # a.out shared library search paths kern_securelevel_enable="NO" # kernel security level (see init(8)), kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure update_motd="YES" # update version info in /etc/motd (or NO) vinum_drives="" # put in names of disks containing vinum drives ############################################################## ### Allow local configuration override at the very end here ## ############################################################## # # for i in ${rc_conf_files}; do if [ -f $i ]; then . $i fi done >Description: When I installed PAO3 on my NEC Versa LX and tried to use a US Robotics PCMCIA modem, it recognized the modem card and allocated it (i.e. short two-beep sequence then a higher-pitched multi-beep sequence) , but when I tried a "cu -l /dev/cuaa3", I couldn't get an OK response from the modem and the response when receiving a character is very slow in cu. Changing interrupts used has no effect. The only thing that makes it work is using polled I/O. >How-To-Repeat: Install PAO3-19990329-beta out of the box and try to access a PCMCIA modem. >Fix: >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message