Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 29 Apr 1999 19:44:54 -0500 (CDT)
From:      dcarmich@xnet.com
To:        FreeBSD-gnats-submit@freebsd.org
Subject:   kern/11380: PAO3 can't recognize a USR/Megahertz PCMCIA modem on an NEC Versa LX laptop
Message-ID:  <199904300044.TAA00753@dcarmich.xnet.com>

next in thread | raw e-mail | index | archive | help

>Number:         11380
>Category:       kern
>Synopsis:       PAO3 won't recognize a USR/Megahertz PCMCIA modem
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Thu Apr 29 05:40:00 PDT 1999
>Closed-Date:
>Last-Modified:
>Originator:     Douglas Carmichael
>Release:        FreeBSD 3.1-RELEASE i386
>Organization:
none
>Environment:

	NEC Versa LX laptop with 3.1-RELEASE and PAO3-19990329-beta.
Kernel configuration:
machine		"i386"
cpu		"I686_CPU"
ident		DCARMICH-FIXED
maxusers	48

options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
options		FFS_ROOT		#FFS usable as root device [keep this!]
options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
options		"CD9660_ROOT"		#CD-ROM usable as root. "CD9660" req'ed
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
options		UCONSOLE		#Allow users to grab the console

# If your laptop have not had Windoze95-Ready BIOS, please update it.
# Such old BIOS'es sometimes have critical bugs at 32-bit protected
# mode APM BIOS interface (which have not used by Windoze 3.1).

# PC-card suspend/resume support (experimental)
#options		APM_PCCARD_RESUME
options		PCIC_RESUME_RESET

# Keep power for serial cards when the system suspends
# (If your machine hangs up when you try to suspend the system with
#  FAX/Modem PCMCIA card, uncomment this option).
#options	SIO_SUSP_KEEP_PWR

# Detach SCSI devices when the SCSI card is removed
#options		SCSI_DETACH

# Detach ATAPI devices when the ATA card is removed
options		ATAPI_DETACH

# Japanese version of WaveLAN PCMCIA uses 2.4GHz band instead of 915MHz
# band that US version uses.  If you want to use Japanese version of
# WaveLAN, uncomment this line, or edit the corresponding config entry
# of /etc/pccard.conf.
#options	"WAVELAN_PCMCIA_24"

# Suspend the system when the battery status is "Low"
#options	"APM_BATT_LOW_SUSPEND"

# If you want to use NTP on laptop machines, uncomment the following 
# option.  Current APM implementation affects NTP client.
#options	"APM_NO_CLOCK_ADJUST"

# Some X-servers cannot survive suspend/resume on laptop.
# This option kicks her when the system is resumed from suspended mode.
#options	SYSCONS_VTY_RESUME


config		kernel	root on wd0

controller	isa0
controller	pci0

# Dont remove these two lines!
pseudo-device	card	1

# You must use "flags 0x1" when you don't hear any negotiation noise(?)
# if you use modem card, or pccardd doesn't read cis tuple, tell you 
# 'No card in database for"(null)"("(null)")' in case of Cirrus Logic's 
# pcic is your PC.
device		pcic0   at isa? port 0x3e0 flags 0x1 irq 11
#device		pcic0   at isa? port 0x3e4 irq 11

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2
disk		fd0	at fdc0 drive 0

options		"CMD640"	# work around CMD640 chip deficiency
controller	wdc0	at isa? port "IO_WD1" bio irq 14
disk		wd0	at wdc0 drive 0

controller	wdc1	at isa? port "IO_WD2" bio irq 15

options		ATAPI		#Enable ATAPI support for IDE bus
options		ATAPI_STATIC	#Don't do it as an LKM
device		acd0		#IDE CD-ROM
device		wfd0		#IDE floppy (LS-120)

# atkbdc0 controlls both the keyboard and the PS/2 mouse
controller	atkbdc0	at isa? port IO_KBD tty
device		atkbd0	at isa? tty irq 1
device		psm0	at isa? tty irq 12

device		vga0	at isa? port ? conflicts

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? tty
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa? tty
#options		XSERVER			# support for X server
#options		FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options		PCVT_SCANSET=2		# IBM keyboards are non-std

# Mandatory, don't remove
device		npx0	at isa? port IO_NPX irq 13

#
# Laptop support (see LINT for more options)
#
device		apm0    at isa?		# Advanced Power Management
#options		APM_BROKEN_STATCLOCK	# Workaround some buggy APM BIOS

device		sio0	at isa? port "IO_COM1" tty irq 4
device          sio3    at isa? disable port "IO_COM4" tty irq 9

# Parallel port
device		ppc0	at isa? port? net irq 7
controller	ppbus0
device		nlpt0	at ppbus?
device		plip0	at ppbus?
device		ppi0	at ppbus?
#controller	vpo0	at ppbus?

pseudo-device	loop
pseudo-device	sl	1
# DHCP uses BPF (Berkeley Packet Filter)
pseudo-device   bpfilter        4
# ijppp uses tun instead of ppp device
pseudo-device	vn	1
pseudo-device	tun	4
pseudo-device	pty	16
pseudo-device	gzip		# Exec gzipped a.out's

# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
#options		KTRACE		#kernel tracing

# This provides support for System V shared memory.
#
options		SYSVSHM
options		SYSVSEM
options		SYSVMSG

# USB support
#controller    uhci0
#controller    ohci0
#controller    usb0
#
# for the moment we have to specify the priorities of the device
# drivers explicitly by the ordering in the list below. This will
# be changed in the future.
#
#device        ums0
#device        ukbd0
#device        ulpt0
#device        uhub0
#device        ucom0
#device        umodem0
#device        hid0
#device        ugen0

#
#options       USB_DEBUG
#options       USBVERBOSE

dmesg output:
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.1-RELEASE #4: Sun Apr 25 07:51:00 CDT 1999
    root@myname.my.domain:/usr/src/sys/compile/DCARMICH
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (233.29-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x650  Stepping=0
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>>
real memory  = 100663296 (98304K bytes)
avail memory = 95416320 (93180K bytes)
Preloaded elf kernel "kernel" at 0xf0245000.
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge (AGP disabled)> rev 0x02 on pci0.0.0
vga0: <ATI model 4c50 graphics accelerator> rev 0xdc int a irq 10 on pci0.2.0
pcic0: <Ricoh RL5C478 PCI-CardBus Brige> rev 0x02 int a irq 255 on pci0.3.0
RL5C4XX PCI Config Reg: 
pcic1: <Ricoh RL5C478 PCI-CardBus Brige> rev 0x02 int b irq 255 on pci0.3.1
RL5C4XX PCI Config Reg: 
chip1: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip2: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 not found at 0x3f8
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <HITACHI_DK237A-21>
wd0: 2067MB (4233600 sectors), 4200 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <TOSHIBA CD-ROM XM-1702B/1161>, removable, accel, dma, iordis
acd0: drive speed 4134KB/sec, 128KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
ppc0 at 0x378 irq 7 on isa
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
pcic0 at 0x3e0-0x3e1 irq 11 flags 0x1 on isa
PC-Card ctlr(0) Ricoh RL5C478 [CardBus bridge mode] (5 mem & 2 I/O windows)
pcic0: slot 0 controller I/O address 0x3e0
pcic0: slot 1 controller I/O address 0x3e0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
apm0 on isa
apm: found APM BIOS version 1.2
changing root device to wd0s1a
Card inserted, slot 0
sio3: type 16550A
sio3: unload,gone
Return IRQ=4
Card removed, slot 0
Card inserted, slot 0
Slot 0, unfielded interrupt (0)
sio3: type 16550A
sio3: unload,gone
Return IRQ=4
Card removed, slot 0
Card inserted, slot 0
Slot 0, unfielded interrupt (0)
sio3: type 16550A
sio3: unload,gone
Return IRQ=4
Card removed, slot 0
Card inserted, slot 0
Slot 0, unfielded interrupt (0)
sio3: type 16550A
sio3: unload,gone
Return IRQ=4
Card removed, slot 0

pccard.conf:
# PC-card sample configuration file
# Tatsumi Hosokawa <hosokawa@jp.FreeBSD.org>
#
# Removing all IRQ conflicts from this file can't be done because of some
# IRQ-selfish PC-cards.  So if you want to use some of these cards in
# your machine, you will be forced to modify their IRQ parameters from
# the following list.
#
# $Id: pccard.conf.sample,v 1.1.1.1.2.10.2.6.2.21.2.18 1999/03/17 14:29:45 toshi Exp $

# Generally available IO ports
io	0x240-0x3ff
# Generally available IRQs (DEPRECATED, USE OF THE OPTION IS DISCOURAGED)
#irq	10 11
# Unavailable IRQs
#ignirq	9
# refrain from using SoundBlaster's IRQ, by default.
ignirq 5 3 
# it may be helful for most of notebook PCs
#ignirq 15
# Available memory slots
memory	0xd4000	96k

#-----------------------------------------------------------------------
# Were not for special reasons, please add new entries at the top of
# this file when you wrote new entries for unsupported cards.
# And, if you succeed using new unsupported cards, please e-mail me
# the new entries.
# Tatsumi Hosokawa <hosokawa@jp.FreeBSD.org>
#-----------------------------------------------------------------------

# ......... for unsupported cards .........

#-----------------------------------------------------------------------
# Fast Ethernet Cards
#-----------------------------------------------------------------------

# PLANEX (PLANET) FNW-3600-T
card "Fast Ethernet" "Adapter"
	config	0x1 "ed0" any
	insert	logger -s PLANEX FNW-3600-T inserted
	insert	/etc/pccard_ether $device
	remove	logger -s PLANEX FNW-3600-T removed
	remove	/etc/pccard_ether_remove $device

# Laneed LD-10/100CD
card "Laneed" "LD-10/100CD"
	config	default "ed0" any
	insert	logger -s Laneed LD-10/100CD inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Laneed LD-10/100CD removed
	remove	/etc/pccard_ether_remove $device

# Linksys EtherFast 10/100 PC Card (NE2000 Compatible)
card "Linksys" "EtherFast 10/100 PC Card \(PCMPC100\)"
	config  default "ed0" any
	insert  logger -s Linksys EtherFast 10/100 inserted
	insert  /etc/pccard_ether $device
	remove  logger -s Linksys EtherFast 10/100 removed
	remove  /etc/pccard_ether_remove $device

# Logitec LPM-LN100TX 100BASE-TX Ethernet LAN CARD
card "Logitec" "LPM-LN100TX"
	config  default "ed0" any
	insert  logger -s Logitec LPM-LN100TX Ethernet inserted
	insert  /etc/pccard_ether $device
	remove  logger -s Logitec LPM-LN100TX Ethernet removed
	remove  /etc/pccard_ether_remove $device

# BayNetworks NETGEAR FA410TXC Fast Ethernet
card "NETGEAR" "FA410TX" "Fast Ethernet"
	config  default "ed0" any
	insert  logger -s NETGEAR FA410TX inserted
	insert  /etc/pccard_ether $device
	remove  logger -s NETGEAR FA410TX removed
	remove  /etc/pccard_ether_remove $device

# Telecom Device SuperSocket RE550T
card "Telecom Device K\.K\." "SuperSocket RE550T"
	config  default "ed0" any
	insert	logger -s Telecom Device SuperSocket RE550T inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Telecom Device SuperSocket RE550T removed
	remove	/etc/pccard_ether_remove $device

# ONTEC LN-2221 10/100 Ethernet Adapter
card "ONTEC & SMC" "LN-2221 Ethernet PCCard"
	config  default "sn0" any
	insert  logger -s ONTEC LN-2221 Ethernet inserted
	insert  /etc/pccard_ether $device
	remove  logger -s ONTEC LN-2221 Ethernet removed
	remove  /etc/pccard_ether_remove $device

# COREGA FastEther PCC-TX
card "corega K.K." "corega FastEther PCC-TX"
	config	default "ed0" any
	insert	logger -s Corega FastEther PCC-TX inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Corega FastEther PCC-TX removed
	remove	/etc/pccard_ether_remove $device

# I/O DATA PCET/TX
card "IO DATA" "PCETTX"
	config	default "ed0" any
	insert	logger -s IO-DATA PCET/TX inserted
	insert	/etc/pccard_ether $device
	remove	logger -s IO-DATA PCET/TX removed
	remove	/etc/pccard_ether_remove $device

# CyQ've ELA-110
card "CyQ've" "ELA-110 10/100M LAN Card"
        config  default "ed0" any
        insert  logger -s "CyQ've ELA-100 10/100M LAN card inserted"
        insert  /etc/pccard_ether $device
        remove  logger -s "CyQ've ELA-100 10/100M LAN card removed"
        remove  /etc/pccard_ether_remove $device

# D-Link DFE-650 Ethernet Card
card "D-Link" "DFE-650"
	config	default "ed0" any 0x10
	insert	logger -s D-link DFE-650 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s D-link DFE-650 removed
	remove	/etc/pccard_ether_remove $device

# MELCO LPC-TX
card "MELCO/SMC" "LPC-TX"
	config	default "sn0" any
	ether	0x4a 00:a0:dc
	insert	logger -s MELCO/SMC LPC-TX inserted
	insert	/etc/pccard_ether $device
	remove	logger -s MELCO/SMC LPC-TX removed
	remove	/etc/pccard_ether_remove $device

#-----------------------------------------------------------------------
# Ethernet Cards
#-----------------------------------------------------------------------

#IBM PCMCIA Ethernet I/II, RIOS PC CARD II ETHERNET
card "IBM Corp\." "Ethernet"
	config	default "ed0" any
	ether	0xff0	# 08:00:5a 00:04:ac 00:06:29
	insert	logger -s IBM PCMCIA Ethernet inserted
	insert	/etc/pccard_ether $device
	remove	logger -s IBM PCMCIA Ethernet removed
	remove	/etc/pccard_ether_remove $device

# Planet Smart COM 2000, Melco LPC-T
card "PCMCIA" "UE2212"
	config	default "ed0" any 0x10
	ether	0xff0 00:00:e8
	insert	logger -s Planet Smart COM 2000 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Planet Smart COM 2000 removed
	remove	/etc/pccard_ether_remove $device

# Accton EN2212
card "ACCTON" "EN2212"
	config	default "ed0" any 0x30
	ether	0xff0 00:00:e8
	insert	logger -s Accton EN2212 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Accton EN2212 removed
	remove	/etc/pccard_ether_remove $device

# Planet Communications Ethernet Card ENW-3501-T
card "IC-CARD+" "IC-CARD+"
	config	default "ed0" any 0x10
	insert	logger -s Planet ENW-3501-T inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Planet ENW-3501-T removed
	remove	/etc/pccard_ether_remove $device

# Planet Smart COM 3500, IC-Card Ethernet, SYSCOM SC100 Ethernet Card
card "IC-CARD" "IC-CARD"
	config	default "ed0" any 0x20
#	config	default "ed0" any 0x10
	insert	logger -s Planet Smart Com 3500 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Planet Smart Com 3500 removed
	remove	/etc/pccard_ether_remove $device

# 3Com Etherlink III 3C589, 3C589B, 3C589C, 3C589D
card "3Com Corporation" "3C589"
	config	default "ep0" any
	insert	logger -s 3Com Etherlink III inserted
	insert	/etc/pccard_ether $device
	remove	logger -s 3Com Etherlink III removed
	remove	/etc/pccard_ether_remove $device

# 3Com Megahertz 3CXE589ET
card "3Com" "Megahertz 589E"
	config	default "ep0" any
	insert	logger -s 3Com Megahertz 3C589E inserted
	insert	/etc/pccard_ether $device
	remove	logger -s 3Com Megahertz 3C589E removed
	remove	/etc/pccard_ether_remove $device

# Farallon EtherMac
card "Farallon" "ENet"
	config	default "ep0" any
	insert	logger -s Farallon EtherMac inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Farallon EtherMac removed
	remove	/etc/pccard_ether_remove $device

# Fujitsu FMV-J181
card "PCMCIA MBH10302" "01"
	config	0xc "fe0" any
	insert	logger -s Fujitsu FMV-J181 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Fujitsu FMV-J181 removed
	remove	/etc/pccard_ether_remove $device

# NextCom J Link NC5310
card "NextComK\.K\." "NC5310 Ver1\.0.*"
	config  0x14 "fe0" any
#	config  0x1a "fe0" any
	insert	logger -s NextCom J Link NC5310 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s NextCom J Link NC5310 removed
	remove	/etc/pccard_ether_remove $device

# HITACHI HT-4840-11
card "HITACHI" "HT-4840-11"
	config	0x1a "fe0" any
	insert	logger -s HITACHI HT-4840-11 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s HITACHI HT-4840-11 removed
	remove	/etc/pccard_ether_remove $device

# CONTEC C-NET(PC)C Ethernet
card "CONTEC Co\.,Ltd\." "C-NET\(PC\)C.*"
	config	default "fe0" any
	ether	0x58 00:80:4c
	insert	logger -s CONTEC C-NET inserted
	insert  /etc/pccard_ether $device
	remove	logger -s CONTEC C-NET removed
	remove	/etc/pccard_ether_remove $device

# TDK LAC-CD021, LAC-CD021A
card "TDK" "LAC-CD02x"
	config	default "fe0" any
	# These cards have same ID strings, and different MAC address
	# locations.
	ether	0x92 00:80:98		# LAC-CD021, LAC-021A
	ether	0x96 00:80:98		# LAC-CD021BX
	insert	logger -s TDK LAC-CD021 inserted
	insert  /etc/pccard_ether $device
	remove	logger -s TDK LAC-CD021 removed
	remove  /etc/pccard_ether_remove $device

# Fujitsu FMV-J182, FMV-J182A
card "FUJITSU" "LAN Card\(FMV-J182\)"
	config	0x32 "fe0" any
	# These cards have same ID strings, and different MAC address
	# locations.
	ether	0xf2c 00:00:0e		#FMV-J182
	ether	0x1cc 00:00:0e		#FMV-J182A
	insert	logger -s Fujitsu FMV-J182 inserted
	insert  /etc/pccard_ether $device
	remove	logger -s Fujitsu FMV-J182 removed
	remove	/etc/pccard_ether_remove $device

# Megahertz X-Jack Ethernet CC10BT/2
card "Megahertz" "CC10BT/2"
	config	default "sn0" any
	ether	attr2hex 00:00:86
	insert	logger -s Megahertz X-Jack Ethernet inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Megahertz X-Jack Ethernet removed
	remove	/etc/pccard_ether_remove $device

# Megahertz Ethernet Adapter
card "Megahertz" "ETHERNET ADAPTOR"
	config	default "sn0" any
	ether	attr2hex 00:00:86
	insert	logger -s Megahertz Ethernet inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Megahertz Ethernet removed
	remove	/etc/pccard_ether_remove $device

# Dayna Communications CommuniCard E
card "Dayna Communications, Inc\." "CommuniCard E"
	config	default "ed0" any 0x10
	ether	0x110 00:80:19
	insert	logger -s Dayna CommuniCard inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Dayna CommuniCard remove
	remove	/etc/pccard_ether_remove $device

# GVC NIC-2000P Ethernet Card
card "GVC" "NIC-2000p"
	config	default "ed0" any 0x10
	insert	logger -s GVC NIC-200P inserted
	insert	/etc/pccard_ether $device
	remove	logger -s GVC NIC-200P removed
	remove	/etc/pccard_ether_remove $device

# No-brand NE-2000 compatible card
card "PCMCIA" "ETHERNET V1.0"
	config	default "ed0" any 0x10
	ether	0xff0		# MAC address field should be filled
	insert	logger -s PCMCIA ETHERNET V1.0 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s PCMCIA ETHERNET V1.0 removed
	remove	/etc/pccard_ether_remove $device

# Eiger Labs Ethernet COMBO
card "EIGER Labs Inc\." "Ethernet COMBO Card"
	config	default "ed0" any 0x10
	insert	logger -s Eiger Labs Ethernet COMBO inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Eiger Labs Ethernet COMBO inserted
	remove	/etc/pccard_ether_remove $device

# D-Link DE-650 Ethernet Card
card "D-Link" "DE-650"
	config	default "ed0" any 0x10
# New models of DE650 has no ether MAC address definition in CIS tupples.
# If you have an older one, please uncomment the following line.
#	ether	0x40 00:80:c8
	insert	logger -s D-link DE-650 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s D-link DE-650 removed
	remove	/etc/pccard_ether_remove $device

# National Semiconductor InfoMover 4100
card "National Semiconductor" "InfoMover 4100"
	config	default "ed0" any
	ether	0xff0 08:00:17
	insert	logger -s National Semiconductor InfoMover inserted
	insert	/etc/pccard_ether $device
	remove	logger -s National Semiconductor InfoMover removed
	remove	/etc/pccard_ether_remove $device

# Accton EN2216 EtherCard
card "ACCTON" "EN2216-PCMCIA-ETHERNET"
	config	0x22 "ed0" any 0x10
	ether	0x1c0 00:00:e8
	insert	/etc/pccard_ether $device
	insert	logger -s Accton EN2216 inserted
	remove	/etc/pccard_ether_remove $device
	remove	logger -s Accton EN2216 removed

# Accton UE2216 Ethernet OEM
card "PCMCIA" "PCMCIA-ETHERNET-CARD"
	config	0x22 "ed0" any 0x10
	ether	0x1c0 00:00:e8
	insert	logger -s Accton UE2216 Ethernet inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Accton UE2216 Ethernet removed
	remove	/etc/pccard_ether_remove $device

# NDC Instant-Link
card "NDC" "Ethernet"
	config	default "ed0" any 0x30
	insert	logger -s NDC Instant-Link inserted
	insert	/etc/pccard_ether $device
	remove	logger -s NDC Instant-Link removed
	remove	/etc/pccard_ether_remove $device

# Laneed PCMCIA Ethernet card. ELECOM LD-CDWA (DP83902A)
card "MACNICA" "ME1-JEIDA"
	config  default "ed0" any
	ether   0xb8 08:00:42
	insert  logger -s MACNICA PCMCIA Ethernet inserted
	insert  /etc/pccard_ether $device
	remove  logger -s MACNICA PCMCIA Ethernet removed
	remove  /etc/pccard_ether_remove $device

# Digital DEPCM-BA Ethernet
card "DIGITAL" "DEPCM-XX"
	config	default "ed0" any 0x10
	insert  logger -s Digital DEPCM-BA Ethernet inserted
	insert	/etc/pccard_ether $device
	remove  logger -s Digital DEPCM-BA Ethernet removed
	remove	/etc/pccard_ether_remove $device

# Matsushita Electric Industrial Co.,LTD. CF-VEL211P-B
card "Matsushita Electric Industrial Co.,LTD." "CF-VEL211"
	config	default "ed0" any
	ether	0xff0 00:80:45
	insert	logger -s Panasonic CF-VEL211 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Panasonic CF-VEL211 removed
	remove	/etc/pccard_ether_remove $device

# ADDTRON EP-210A
card "EP-210 PCMCIA LAN CARD\." ".*"
	config  default "ed0" any 0x10
	ether   0x110 00:40:33
	insert	logger -s ADDTRON EP-210A inserted
	insert  /etc/pccard_ether $device
	remove	logger -s ADDTRON EP-210A removed
	remove  /etc/pccard_ether_remove $device

# PreMax PE-200 Ethernet Card
card "PMX   " "PE-200"
	config	default "ed0" any 0x10
	ether	0x7f0 00:20:e0
	insert	logger -s PREMAX PE-200 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s PREMAX PE-200 removed
	remove	/etc/pccard_ether_remove $device

# No-brand NE2000 compatible card (FCC ID: LXLC1LANTB)
card "     " "Ethernet Combo card"
	config	default "ed0" any 0x10
	insert	logger -s NE2000 compatible card inserted
	insert	/etc/pccard_ether $device
	remove	logger -s NE2000 compatible card removed
	remove	/etc/pccard_ether_remove $device

# RATOC REX-5588 (now testing...)
card "PCMCIA LAN MBH10304  ES" "  01"
# Kouji Yamamoto <kouji@fc10s402.fcs.ts.fujitsu.co.jp> reported that
# following entry worked with his REX-5588, but the card I borrowed 
# has no such config index on CIS tupple.  Minor version problem?
#
#	config  0x3a "fe0" 5
#	ether   0x328 00:c0:d0
#
# I tried to drive it by following entry on my DHU II, but it does
# not work!
#
#	config  0x1f "fe0" any
	config  0x3a "fe0" any
#	config  0x38 "fe0" any
	ether   0x32c 00:c0:d0	# many minor revs....
	ether   0x328 00:c0:d0
	ether   0x200 00:c0:d0
	insert  logger -s RATOC REX-5588 Ethernet inserted
	insert  /etc/pccard_ether $device
	remove  logger -s RATOC REX-5588 Ethernet removed
	remove  /etc/pccard_ether_remove $device

# SCM Ethernet Combo (*Not SMC :-)*)
card "SCM" "Ethernet Combo card"
	config	default "ed0" any 0x10
	ether   0xff0 00:20:cb
	insert	logger -s SCM Ethernet card inserted
	insert	/etc/pccard_ether $device
	remove	logger -s SCM Ethernet card removed
	remove	/etc/pccard_ether_remove $device

# Linksys Combo PCMCIA Ethernet Card
card "LINKSYS" "E-CARD"
	config	default "ed0" any 0x10
	insert	logger -s Linksys Combo Ethernet inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Linksys Combo Ethernet removed
	remove	/etc/pccard_ether_remove $device

# Linksys Combo PCMCIA Ethernet Card
card "Linksys" "Combo PCMCIA EthernetCard \(EC2T\)"
	config	default "ed0" any 0x10
	insert	logger -s Linksys PCMCIA Ethernet inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Linksys PCMCIA Ethernet removed
	remove	/etc/pccard_ether_remove $device

# I/O DATA PCLA/T
card "I-O DATA" "PCLA"
	config	default "ed0" any 0x10
	ether	0x1c0 00:a0:b0
	ether	0xff0 00:a0:b0
	insert	logger -s I-O DATA PCLA/T Ethernet inserted
	insert	/etc/pccard_ether $device
	remove	logger -s I-O DATA PCLA/T Ethernet removed
	remove	/etc/pccard_ether_remove $device

# I/O DATA PCLA/TE
card "IO DATA" "PCLATE"
	config	default "ed0" any 0x10
	insert	logger -s I-O DATA PCLA/TE Ethernet inserted
	insert	/etc/pccard_ether $device
	remove	logger -s I-O DATA PCLA/TE Ethernet removed
	remove	/etc/pccard_ether_remove $device

# Fujitsu Towa LA501 Ethernet
card "FUJITSU TOWA" "LA501"
	config	0x29 "fe1" any 0x10
	ether	0x332 00:00:0e
	insert	logger -s Fujitsu Towa LA501 Ethernet inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Fujitsu Towa LA501 Ethernet removed
	remove	/etc/pccard_ether_remove $device

# Grey Cell GCS2220 Ethernet Card
card "Grey Cell" "GCS2220"
	config	default "ed0" any 0x10
	insert	logger -s Grey Cell GCS2220 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Grey Cell GCS2220 removed
	remove	/etc/pccard_ether_remove $device

# Epson EEN10B Ethernet Card
card "Seiko Epson Corp\." "Ethernet"
	config	default "ed0" any 0x10
	ether	0xff0 00:00:48
	insert	logger -s Epson EEN10B Ethernet Card inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Epson EEN10B Ethernet Card removed
	remove	/etc/pccard_ether_remove $device

# COREGA Ethernet Card
card "Corega,K\.K\." "\(Ethernet LAN Card\)"
	config	default "ed0" any 
	ether   0xff0 00:00:f4
	insert	logger -s Corega Ethernet inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Corega Ethernet removed
	remove	/etc/pccard_ether_remove $device

# COREGA Ether PCC-T
card "corega K.K." "corega Ether PCC-T"
	config	default "ed0" any 
	insert	logger -s Corega Ether PCC-T inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Corega Ether PCC-T removed
	remove	/etc/pccard_ether_remove $device

# Telecom Device SuperSocket RE450T
card "Ethernet" "Adapter"
	config	0x3 "ed0" any 
# There's another minor revision of this card that has no MAC address in 
# CIS tupple.  This revision does not require "ether" definition. If you 
# have it, please comment out the following line.
	ether	0x110 00:e0:98
# Please note that if the log message says that the MAC address of the 
# card is 00:00:00:00:00:00, please uncomment the "ether" definition again
# and set it to proper value. 
	insert	logger -s Telecom Device SuperSocket RE450T inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Telecom Device SuperSocket RE450T removed
	remove	/etc/pccard_ether_remove $device

# Telecom Device SuperSocket RE450T
card "Telecom Device K.K." "SuperSocket RE450T"
	config	default "ed0" any
	insert	logger -s Telecom Device SuperSocket RE450T inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Telecom Device SuperSocket RE450T removed
	remove	/etc/pccard_ether_remove $device

# RPTI EP401 Ethernet NE2000 compatible
card "RPTI" "EP401 Ethernet NE2000 Compatible"
	config  default "ed0" any
	insert	logger -s RPTI EP401 Ethernet inserted
	insert  /etc/pccard_ether $device
	remove	logger -s RPTI EP401 Ethernet removed
	remove  /etc/pccard_ether_remove $device

# Nihon Unisys, Ltd. JPF0400-LAN
card "Nihon Unisys, Ltd." "JPF0400-LAN"
	config	default "ed0" any
	ether	0xff0 00:80:45
	insert	logger -s Nihon Unisys JPF0400-LAN inserted
	insert  /etc/pccard_ether $device
	remove	logger -s Nihon Unisys JPF0400-LAN removed
	remove  /etc/pccard_ether_remove $device

# Nihon Unisys, Ltd. JPF0400-ETH
card "Nihon Unisys, Ltd." "JPF0400-ETH"
	config	default "ed0" any
	ether	0xff0 00:80:45
	insert	logger -s Nihon Unisys JPF0400-ETH inserted
	insert  /etc/pccard_ether $device
	remove	logger -s Nihon Unisys JPF0400-ETH removed
	remove  /etc/pccard_ether_remove $device

# SURECOM EtherPerfect EP-427 Adapter
card "TAMARACK" "Ethernet"
	config	default "ed0" any
	ether	attr2hex 00:47:43
	insert	logger -s SURECOM EtherPerfect EP-427 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s SURECOM EtherPerfect EP-427 removed
	remove	/etc/pccard_ether_remove $device

# RATOC REX-R280
card "RATOC System Inc\." "10BASE_T CARD R280"
	config	0x3a "fe0" any
	ether	0x1fc 00:c0:d0
	insert	logger -s RATOC REX-R280 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s RATOC REX-R280 removed
	remove	/etc/pccard_ether_remove $device

# D-Link DE-660 Ethernet Card
card "D-Link" "DE-660"
	config	default "ed0" any 0x10
	insert	logger -s D-link DE-660 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s D-link DE-660 removed
	remove	/etc/pccard_ether_remove $device

# Allied Telesis Ethernet Card
card "Allied Telesis,K\.K" "Ethernet LAN Card"
	config	default "ed0" any 0x10
	ether	0xff0 00:00:f4
	insert	logger -s Allied Telesis Ethernet Card inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Allied Telesis Ethernet Card removed
	remove	/etc/pccard_ether_remove $device

# Toshiba Joho System PTJ-LAN/T
card "TJ" "Ethernet"
	config	default "ed0" any 0x10
	insert	logger -s TJ Ethernet card inserted
	insert	/etc/pccard_ether $device
	remove	logger -s TJ Ethernet card removed
	remove	/etc/pccard_ether_remove $device

# NextCom Next Hawk Etherneet Adapter
card "NextCom K.K." "Next Hawk"
	config	default "ed0" any
	insert	logger -s NextCom Next Hawk Ethernet inserted
	insert	/etc/pccard_ether $device
	remove	logger -s NextCom Next Hawk Ethernet removed
	remove	/etc/pccard_ether_remove $device

# Logitec LPM-LN20T
card "Logitec" "LPM-LN20T"
	config	default "ed0" any
	insert	logger -s Logitec LPM-LN20T inserted
	insert	/etc/pccard_ether $device
	insert	logger -s Logitec LPM-LN20T removed
	remove	/etc/pccard_ether_remove $device

# CentreCOM LA-PCM V2
card "Allied Telesis, K\.K\." "CentreCOM LA-PCM_V2"
	config	0x20 "ed0" any 0x10
	insert	logger -s CentreCOM LA-PCM V2 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s CentreCOM LA-PCM V2 removed
	remove	/etc/pccard_ether_remove $device

# Map Japan MPL-972
card "2408LAN" "Ethernet"
	config	default "ed0" any
	insert	logger -s Map Japan MPL-972 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Map Japan MPL-972 removed
	remove	/etc/pccard_ether_remove $device

# EXPsys PCMCIA Ethernet Combo, Relia PCMCIA Ethernet
card "PCMCIA LAN" "Ethernet"
	config	default "ed0" any
	insert	logger -s EXPsys Ethernet inserted
	insert	/etc/pccard_ether $device
	remove	logger -s EXPsys Ethernet removed
	remove	/etc/pccard_ether_remove $device

# CyQ've ELA-010 10BASE-T LAN Card
card "CyQ've" "ELA-010"
	config	default "ed0" any 0x10
	insert	logger -s CyQ\'ve ELA-010 LAN card inserted
	insert	/etc/pccard_ether $device
	remove	logger -s CyQ\'ve ELA-010 LAN card removed
	remove	/etc/pccard_ether_remove $device

# Billionton LNT-10TB
card "Billionton" "LNT-10TB"
	config	0x20 "ed0" any
	insert	logger -s Billionton LNT-10TB inserted. 
	insert	/etc/pccard_ether $device
	remove	logger -s Billionton LNT-10TB removed. 
	remove	/etc/pccard_ether_remove $device

# MELCO LPC2-T
card "MELCO" "LPC2-T"
	config	default "ed0" any
	insert	logger -s MELCO LPC2-T inserted
	insert	/etc/pccard_ether $device
	remove	logger -s MELCO LPC2-T removed
	remove	/etc/pccard_ether_remove $device

# CNet PCMCIA PowerNIC CN40BC(BT)
card "CNet" "CN40BC Ethernet"
	config	default "ed0" any 0x10
	insert	logger -s CNet CN40BC inserted
	insert	/etc/pccard_ether $device
	remove	logger -s CNet CN40BC removed
	remove	/etc/pccard_ether_remove $device

# Kingston KNE-PCM/x Ethernet
card "Kingston Technology Corp\." "EtheRx PC Card Ethernet.*"
	config	default "ed0" any
	ether	0xff0 00:c0:f0
	insert	logger -s Kingston KNE-PCM/x Ethernet inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Kingston KNE-PCM/x Ethernet removed
	remove	/etc/pccard_ether_remove $device

# NEC PC-9801N-J12
card "NEC" "PC-9801N-J12"
	config	default "ed0" any
	ether	0xff0 00:00:4c
	insert	logger -s NEC PC-9801N-J12 inserted
	insert	/etc/pccard_ether $device
	remove	logger -s NEC PC-9801N-J12 removed
	remove	/etc/pccard_ether_remove $device

#-----------------------------------------------------------------------
# Modem Cards
#-----------------------------------------------------------------------
# Most of modem cards does not match these definitions.  Please read 
# "wildcard entries" listed at the end of this file.
#-----------------------------------------------------------------------

# Omron MD24XCA FAX/Data Modem
card "OMRON Corp\." "MD24XCA"
	config	auto "sio3" pio
	reset	10000
	insert	logger -s OMRON MD24XCA Modem inserted
	remove	logger -s OMRON MD24XCA Modem removed

#-----------------------------------------------------------------------
# ISDN Serial Cards
#-----------------------------------------------------------------------

# NTT-IT ThunderCard
card "NTT Intelligent Technology Co., Ltd." "ThunderCard DD128"
	config	auto "sio3" any 0x80
	reset	1000
	insert  logger -s NTT-IT Thunder-card inserted
	remove  logger -s NTT-IT Thunder-card removed

#-----------------------------------------------------------------------
# Digital Cellular Cards
#-----------------------------------------------------------------------

# NTT DoCoMo DATA/FAX Adapter
card "NTT DoCoMo" "PCMCIA DATA/FAX.*"
	config	auto "sio3" any 0x82
	insert  logger -s NTT DoCoMo DATA/FAX Adapter inserted
	remove  logger -s NTT DoCoMo DATA/FAX Adapter removed

# NTT DoCoMo Mobile D Card 96P1
card "NTT DoCoMo" "Mobile D Card 96P1"
	config  auto "sio3" any 0x82
	insert  logger -s NTT DoCoMo Mobile D Card 96P1 Adapter inserted
	remove  logger -s NTT DoCoMo Mobile D Card 96P1 Adapter removed

#-----------------------------------------------------------------------
# PHS Digital Communication Cards
#-----------------------------------------------------------------------

# NTT Personal Paldio Data/Fax Card DC-1S
card "NTT Personal" "Paldio Data/Fax Card" "DC-1S"
	config	auto "sio3" any 0x40000
	insert	logger -s NTT Personal Paldio Data/Fax Card DC-1S inserted
	remove	logger -s NTT Personal Paldio Data/Fax Card DC-1S removed

# NTT DoCoMo (formerly NTT Personal) Paldio 321S
card "NTT Personal" "32K Paldio 321S PC CARD"
	config	auto "sio3" any 0x40000
	insert	logger -s NTT Personal Paldio 321S PC Card inserted
	remove	logger -s NTT Personal Paldio 321S PC Card removed

#-----------------------------------------------------------------------
# Misc. Serial Cards
#-----------------------------------------------------------------------

# Panasonic FM-RADIO card
card "Panasonic" "CF-JVR101"
	config	auto "sio3" pio
	insert  logger -s Panasonic FM radio card inserted
	remove  logger -s Panasonic FM radio card removed

#-----------------------------------------------------------------------
# SCSI Cards
#-----------------------------------------------------------------------

# Adaptec SlimSCSI 
card "Adaptec, Inc\." "APA-1460.*"
	config	default "aic0" any
	insert	logger -s Adaptec Slim SCSI inserted
	remove	logger -s Adaptec Slim SCSI removed

# New Media Corporation BASICS SCSI
# (Do not put this entry under Bustoaster)
card "BASICS by New Media Corporation" "SCSI Sym53C500"
	config	0x14 "ncv0" any 
	insert	logger -s New Media BASICS SCSI inserted
	remove	logger -s New Media BASICS SCSI removed

# NewMedia Bustoaster SCSI
card "New Media" "SCSI"
	config	0x22 "aic0" any
	insert	logger -s New Media Bus Toaster inserted
	remove	logger -s New Media Bus Toaster removed

# RATOC REX-5536AM, REX-9836A, ICM PSC-2401 SCSI
# (Don't put this entry under REX5535 series!)
# There's a buggy revision of this card which has broken CIS tupples.
# if you can't use this card, please use the point enabler. (for example, 
# type "pccardc enabler 0 stg0 -a 0x4140 -i 5" from root command prompt)
card "PCMCIA SCSI MBH10404" "01"
	config	0x37 "stg0" any
	insert	logger -s RATOC REX-5536AM SCSI inserted
	remove	logger -s RATOC REX-5536AM SCSI removed

# RATOC REX-5535AC, REX-5535X, REX-9835X, REX-9835Z SCSI
card "PCMCIA SCSI MBH1040" "01"
	config	0x3a "spc0" any
	insert	logger -s RATOC REX-5535 SCSI inserted
	remove	logger -s RATOC REX-5535 SCSI removed

# RATOC REX-5536M
card "PCMCIA SCSI2 CARD" "01"
	config	0x5 "stg0" any 0
	insert	logger -s RATOC REX-5536M SCSI inserted
	remove	logger -s RATOC REX-5536M SCSI removed

# RATOC REX-5536, Melco IFC-SC
card "1195 RATOC System Inc\." "REX5536 SCSI2 CARD"
	config	0x7 "stg0" any 0
	insert	logger -s RATOC REX-5536 SCSI inserted
	remove	logger -s RATOC REX-5536 SCSI removed

# RATOC REX-9530
card "RATOC System Inc." "SCSI2 CARD.*"
	config	default "ncv0" any 0x84d00000
	insert	logger -s RATOC REX-9530 SCSI inserted
	remove	logger -s RATOC REX-9530 SCSI removed

# IO DATA PCSC-DV
# Macnica Miracle SCSI mPS100
card "MACNICA" "MIRACLE SCSI" "mPS100" "D.0"
	config	0x11 "ncv0" any 0xb6250000
	insert	logger -s MACNICA Miracle SCSI inserted
	remove	logger -s MACNICA Miracle SCSI removed

# Macnica Miracle SCSI-II mPS110
card "MACNICA" "MIRACLE SCSI-II mPS110"
	config	0x15 "ncv0" any 0
	insert	logger -s MACNICA Miracle SCSI-II inserted
	remove	logger -s MACNICA Miracle SCSI-II removed

# IBM SCSI PCMCIA Card
card "IBM Corp\." "SCSI PCMCIA Card"
	config	default "stg0" any
	insert	logger -s IBM SCSI PCMCIA Card inserted
	remove	logger -s IBM SCSI PCMCIA Card removed

# Future Domain SCSI2GO
card "Future Domain Corporation" "SCSI PCMCIA Credit Card Controller"
	config	default "stg0" any
	insert	logger -s Future Domain SCSI2GO inserted
	remove	logger -s Future Domain SCSI2GO removed

# KME (TAXAN ICD-400PN, etc.)
card "KME" "KXLC002"
	config	0x26 "ncv0" any 0xb4d00000
	insert	logger -s KME SCSI PCMCIA Card inserted
	remove	logger -s KME SCSI PCMCIA Card removed

# Qlogic Fast SCSI
card "QLOGIC CORPORATION" "pc05"
	config	0x2f "ncv0" any 0x84d00000
	insert	logger -s Qlogic Fast SCSI inserted
	remove	logger -s Qlogic Fast SCSI removed

# Media Intelligent SCSI-2 PC Card MSC-200
card "EPSON" "SCSI-2 PC Card SC200"
	config	0x12 "ncv0" any 
	insert	logger -s EPSON SCSI-2 PC Card MSC200 inserted
	remove	logger -s EPSON SCSI-2 PC Card MSC200 removed

# NEC PC-9801N-J03R
card "NEC" "PC-9801N-J03R"
	config	0x15 "ncv0" any 0
	insert	logger -s NEC PC-9801N-J03R inserted
	remove	logger -s NEC PC-9801N-J03R removed

# NEC PC-9801N-J03
# (Don't put this entry previous to NEC PC-9801N-J03R)
card "NEC" "PC-9801N-J03"
	config	0x15 "ncv0" any 0xb6000000
# (port 0x330 is used for MPU401 on Toshiba Libretto60)
#	config	0x11 "ncv0" any 0xb6000000
	insert	logger -s PC-9801N-J03 inserted
	remove	logger -s PC-9801N-J03 removed

# WORKBIT Ninja SCSI series
card "WBT" "NinjaSCSI-3"
	config	default "nin0" any
	insert	logger -s Workbit NinjaSCSI-3 inserted
	remove	logger -s Workbit NinjaSCSI-3 removed

# Fujitsu Towa Electron SC501 SCSI (RATOC REX-5535 OEM)
card "FUJITSU TOWA" "SC501"
	config  0x3a "spc0" any
	insert  logger -s Fujitsu Towa SC501 SCSI inserted
	remove  logger -s Fujitsu Towa SC501 SCSI removed

#------------------------ untested ----------------------------

#------------------------ untested ----------------------------
# If these entry do not work, try other config index than default.
# Please e-mail me whether it works or not.  Thanks
# Tatsumi Hosokawa <hosokawa@jp.FreeBSD.org>

card "MIDORI ELECTRONICS.*" "CN-SC43.*"
	config	default "ncv0" any 0x80100000
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp

card "EIger Labs" "PCMCIA-to-SCSI Adapter"
	config	default "ncv0" any 
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp

card "SCSI PCMCIA Adapter Card" ".*"
	config	0x20 "stg0" any
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp

card " SIMPLE TECHNOLOGY Corporation" "SCSI PCMCIA Credit Card Controller"
	config	default "stg0" any
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp

card "KME" "KXLC003"
	config	0x26 "ncv0" any 0xb4d00000
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp

#-----------------------------------------------------------------------
# ATAPI CD-ROM Cards
#-----------------------------------------------------------------------

# IO Data CBIDE (bundled with CDP-FX24, etc.)
card "WIT" "IDE16"
	config  default "wdc1" any
	insert  logger -s IO Data CBIDE inserted
	remove  logger -s IO Data CBIDE removed

# DHU Mobile Media CD-ROM
# (no hotplug support)
card "Digital Equipment Corporation\." "Digital Mobile Media CD-ROM"
	config 0xb "wdc1" 15

# Caravelle PSC-IDE 6x ATAPI CD-ROM
card "Caravelle" "PSC-IDE "
	config	0x2a "wdc1" any 0x1
	insert	logger -s Caravelle PSC-IDE card inserted
	remove	logger -s Caravelle PSC-IDE card removed

# IBM Portable 4X Speed CD-ROM Drive CD-400
card "IBM" "PCMCIA CD-ROM Drive CD-400"
	config	0x1 "wdc1" any 0x1000
	cardio	0x250 0x20
	insert	logger -s IBM PCMCIA CD-ROM CD-400 inserted
	remove	logger -s IBM PCMCIA CD-ROM CD-400 removed

# IO Data PCIDEII (bundled with CDP-TX10, etc.)
card "IO DATA" "PCIDEII"
	config	default "wdc1" any
	insert	logger -s IO Data PCIDEII inserted
	remove	logger -s IO Data PCIDEII removed

# IBM CD-20XSeries(IDE PC Card) 
card "IBM" "PCMCIA Portable CD-ROM Drive"
	config	0x1 "wdc1" any 0x1000
	cardio	0x250 0x20 
	insert	logger -s IBM CD-20XS inserted
	remove	logger -s IBM CD-20XS removed

# NOVAC Station Series
card "PCMCIA" "CD-ROM"
	config	default "wdc1" any
	insert	logger -s Novac Station CD-ROM inserted
	remove	logger -s Novac Station CD-ROM removed

#-----------------------------------------------------------------------
# Flash ATA Cards
#-----------------------------------------------------------------------

# SunDisk Flash ATA
card "SunDisk" ".*"
	config	0x03 "wdc1" any
	insert	logger -s SunDisk Flash ATA inserted
	remove	logger -s SunDisk Flash ATA removed

# Midori Elec. Flash ATA
card "Midori Elec\." ".*FLASH.*"
	config	0x03 "wdc1" any
	insert	logger -s Midori Flash ATA inserted
	remove	logger -s Midori Flash ATA removed

#-----------------------------------------------------------------------
# ATA HDD Cards
#-----------------------------------------------------------------------

card "Maxtor" "MXL.*"
	config	0x03 "wdc1" any
	insert	logger -s Maxtor ATA HDD inserted
	remove	logger -s Maxtor ATA HDD removed

#-----------------------------------------------------------------------
# ATA External HDD Adapters
#-----------------------------------------------------------------------

# Greystone Diskdock
card "GREYSTONE PERIPHERAL DISKDOCK" ".*"
	config	default "wdc1" any
	insert	logger -s Greystone Diskdock inserted
	remove	logger -s Greystone Diskdock removed

# 
card "INTEGRAL PERIPHERALS" "ATA CARD"
	config	default "wdc1" any
	insert	logger -s Integral Peripherals inserted
	remove	logger -s Integral Peripherals removed

# DATAFAB PCMMD2
card "DATAFAB" "PCMCIA-TO-IDE"
	config	0x1 "wdc1" any
	insert	logger -s DATAFAB PCMMD2 inserted
	remove	logger -s DATAFAB PCMMD2 removed

# PCM250AM 2.5in HDD adapter
card "PC CARD MANUFACTURER" "PCMCIA ATA/ATAPI Adapter"
	config	0xd "wdc1" any
	insert	logger -s PCM250AM inserted
	remove	logger -s PCM250AM removed

# Sicon Peripheral PCMCIA ATA/ATAPI Adapter
card "Sicon  Peripheral" "PCMCIA ATA/ATAPI Adapter"
	config	default "wdc1" any
	insert	logger -s Sicon Peripherals inserted
	remove	logger -s Sicon Peripherals removed

# Microtech XpressDock
card "Microtech International Inc\." "IDE PCCARD"
	config  default "wdc1" any 0x2000
	cardio  0x170 0x10
	insert	logger -s Microtech XpressDock inserted
	remove	logger -s Microtech XpressDock removed

#-----------------------------------------------------------------------
# ATAPI LS120 Super Floppy Disk
#-----------------------------------------------------------------------

# LK-RM120
card "Panasonic" "LMEK0406"
	config	0x22 "wdc1" any 0x1
	insert	logger -s Panasonic LMEK0406  inserted
	remove	logger -s Panasonic LMEK0406  removed

#-----------------------------------------------------------------------
# ATAPI ZIP Drive
#-----------------------------------------------------------------------

#  CitiDISK & Addonics PocketZIP
card "Shining" "PMIDE-ASC"
	config	default "wdc1" any 0x2000
	insert	logger -s CitiDISK/PocketZIP inserted
	remove	logger -s CitiDISK/PocketZIP removed

#-----------------------------------------------------------------------
#
# Ongoing Projects ---- These entries are for ongoing projects of 
# our package.  Most of these entries do not work.
#
#-----------------------------------------------------------------------

#-----------------------------------------------------------------------
# Sound cards
#-----------------------------------------------------------------------

# RATOC REX-5570 Sound Card
card "1195 RATOC System Inc\." "REX5570 SOUND CARD"
	config	default "opl0" any

#-----------------------------------------------------------------------
# Multifunction cards
#-----------------------------------------------------------------------

# Multifunction card support is still under development. If you want 
# to use them as modem only in conservative way, uncomment "modem-only" 
# definitions, comment-out multifunction definitions, and recompile
# pccardd and kernel without MULTIFUNC option. (see 
# PAO-dir/usr.sbin/pccard/pccardd and PAO config file for details)
# Tatsumi Hosokawa <hosokawa@jp.FreeBSD.org>

# APEX DATA MultiCard (as Modem only)
card "APEX DATA" "MULTICARD"
	config	0xb "sio3" any
	insert	logger -s APEX DATA MultiCard inserted as Modem
	remove	logger -s APEX DATA MultiCard removed

# Megahertz multifunction card:
# The second multifunction definition does not work (under development).
# if you want to use this card as modem, uncomment the first one.

# Megahertz X-Jack Ethernet/Modem 14.4K (as Modem only)
card "Megahertz" "XJEM1144/CCEM1144"
	config	0x27 "sio3" any
	insert	logger -s Megahertz X-Jack Multifunction Card inserted as Modem.
	remove	logger -s Megahertz X-Jack Multifunction Card removed.

# Megahertz X-Jack Ethernet/Modem 14.4K
#card "MEGAHERTZ" "XJEM1144/CCEM1144"
#	multifunc
#	config 	default "sn0" any
#	config	0x27 "sio3" shared
#	insert	logger -s Megahertz X-Jack Multifunction Card inserted
#	remove	logger -s Megahertz X-Jack Multifunction Card removed

# TDK Multifunctioon Card (as Modem)
card "TDK" "GlobalNetworker 3410/3412"
	config	default "sio3" any
	insert  logger -s TDK Multifunction Card inserted as Modem
	remove  logger -s TDK Multifunction Card removed

# Toshiba Modem/LAN card IPC5001B
card "TOSHIBA" "Modem/LAN Card"
	config  0x25 "sio3" any
	insert  logger -s TOSHIBA IPC5001B Multifunction Card inserted as Modem
	remove  logger -s TOSHIBA IPC5001B Multifunction Card removed

# Motorola Marine multifunction card (as modem)
card "Motorola, Inc\." "MARINER MODEM/FAX/LAN"
	config	0x35 "sio3" any
	insert	logger -s Motorola Marine inserted as Modem
	remove	logger -s Motorola Marine removed

# Xircom CreditCard Ethernet 10/100+ Modem 56 (as modem)
card "Xircom" "CreditCard Ethernet"
	config	0x27 "sio3" any
	insert	logger -s Xircom CEM56 Card inserted as Modem
	remove	logger -s Xircom CEM56 Card removed

# Intel EtherExpress(TM) PRO/100 LAN/Modem PC Card Adapter (as modem)
card "Intel" "EtherExpress\(TM\) PRO/100 LAN/Modem PC Card Adapter"
	config	0x1f "sio3" any
	insert	logger -s Intel EtherExpress PRO/100 LAN/Modem as Modem
	remove	logger -s Intel EtherExpress PRO/100 LAN/Modem

# RATOC REX-5572 (as SCSI only)
card "RATOC System Inc\." "SOUND/SCSI2 CARD.*"
	config	default "ncv0" any 0x84d00000
	cardio	0x640 0x10
	insert	logger -s RATOC SOUND/SCSI2 REX-5572 inserted as SCSI
	remove	logger -s RATOC SOUND/SCSI2 REX-5572 removed

# IO DATA PCMF144/20 (as Flash ATA only)
card "IO DATA" "ATA&MODEM"
	config  0x7 "wdc1" any
	insert  logger -s IO DATA PCMF144/20 inserted as ATA
	remove  logger -s IO DATA PCMF144/20 removed

# Telecom Device SuperSocket LM336 (as Ethernet only)
card "PCMCIAs" "LanModem"
	config	default "ed0" any
	insert	logger -s SuperSocket LM336 inserted as Ethernet
	insert	/etc/pccard_ether $device
	remove	logger -s SuperSocket LM336 removed
	remove	/etc/pccard_ether_remove $device

#-----------------------------------------------------------------------
# Wireless LAN
#-----------------------------------------------------------------------

# NCR Wavelan PCMCIA
# If you want to use Japanese version, uncomment the second config
# line and comment-out the first line.
card "NCR" "WaveLAN/PCMCIA"
	config	default "wlp0" any	# US version (915MHz)
#	config	default "wlp0" any 0x01	# Japanese version (2.4GHz)
	ether	wavelan
	insert	logger -s NCR WaveLAN PCMCIA inserted
	insert  /etc/pccard_ether $device
	remove	logger -s NCR WaveLAN PCMCIA removed
	remove  /etc/pccard_ether_remove $device

# AT&T GIS Wavelan PCMCIA
# If you want to use Japanese version, uncomment the second config
# line and comment-out the first line.
card "AT&T" "WaveLAN/PCMCIA"
	config	default "wlp0" any	# US version (915MHz)
#	config	default "wlp0" any 0x01	# Japanese version (2.4GHz)
	ether	wavelan
	insert	logger -s AT\&T WaveLAN PCMCIA inserted
	insert  /etc/pccard_ether $device
	remove	logger -s AT\&T WaveLAN PCMCIA removed
	remove  /etc/pccard_ether_remove $device

# Digital RoamAbout/DS
card "Digital" "RoamAbout/DS"
	config  default "wlp0" any
	ether   wavelan
	insert	logger -s Digital RoamAbout/DS inserted
	insert  /etc/pccard_ether $device
	remove	logger -s Digital RoamAbout/DS removed
	remove  /etc/pccard_ether_remove $device

# NetWave AirSurfer
# NOTE: For some machines, wait cycle for memory access is required.
# you should change "0x40" on the last part of "cardmem" line to "0x44",
# like:
#	cardmem	0xd4000 0x20000 0x9000 0x44
# IBM ThinkPads are known to require this change.
card "Xircom" "CreditCard Netwave"
	config	0x01 "cnw0" any
	cardmem	0xd4000 0x20000 0x9000 0x40
#	config	0x01 "cnw1" any
#	cardmem	0xdd000 0x20000 0x9000 0x40
	ether	0x126 00:80:c7 00:20:d8
	insert	logger -s Netwave Ethernet inserted
	insert	/etc/pccard_ether $device
	remove	logger -s Netwave Ethernet removed
	remove	/etc/pccard_ether_remove $device

# Victor M-MOIL CARD
card "JVC" "MiniMoil Ethernet Card"
        config  0x01 "sn0" any
        insert  logger -s MiniMoil Ethernet inserted
        insert  /etc/pccard_ether $device
        remove  logger -s MiniMoil Ethernet removed
        remove  /etc/pccard_ether_remove $device

#-----------------------------------------------------------------------
# Video Capture Cards
#-----------------------------------------------------------------------

# IBM Smart Capture Card
card "IBM Corp\." "Video Capture"
	config  default "scc0" pio
	cardmem 0xd4000 0x0 0x8000
	insert  logger -s Smart Capture Card inserted
	remove  logger -s Smart Capture Card removed

#-----------------------------------------------------------------------
# Speech Synthesizer Cards
#-----------------------------------------------------------------------
# Hitachi microcomputer speech synthesizer card
card	"HITACHI MICROCOMPUTER SYSTEM LTD." "MSSHVPC02"
	config	default "hss0" pio
	insert  logger -s Hitachi microcomputer speech synthesizer inserted
	remove  logger -s Hitachi microcomputer speech synthesizer removed

#-----------------------------------------------------------------------
# Joystick Port Cards
#-----------------------------------------------------------------------
card    "IO DATA" "PCJOY"
        config  default "joy0" pio
#       config  0x1 "joy0" pio
#       config  0x2 "joy0" pio
        insert  logger -s IO DATA PCJOY inserted
        remove  logger -s IO DATA PCJOY removed

#-----------------------------------------------------------------------
# Floppy Drive Cards
#-----------------------------------------------------------------------
# Libretto floppy drive.
card "Y-E DATA" "External FDD"
	config	0x4 "fdc1" any
	insert  logger -s Y-E DATA External FDD inserted
	remove  logger -s Y-E DATA External FDD removed

# -------------------------------------------------------------------
#
# Experimental ---- If you have one of them, please e-mail me *WHETHER
# IT WORKS OR NOT*.  I wrote these entries by reading Linux PCMCIA driver
# package.  I've not tested them.  I need results of your experiences.
# Especially, if the ed_probe() is succeeded, it does not always mean 
# that probed MAC address is correct.  If you have or if your friend
# has these cards, send me the result of the results of
# 
#	pccardc dumpcis
# and
#	pccardc rdattr 0 0 1000 (the first 0 means slot number)
#
# of these cards.  I can write more accurate pccard.conf entries if I 
# can read these result. 
#
# I NEED YOUR HELP!!!!
#
# Thanks.
#
# My e-mail address is hosokawa@jp.FreeBSD.org (Tatsumi Hosokawa)
#
# -------------------------------------------------------------------

#-----------------------------------------------------------------------
# Ethernet Cards
#-----------------------------------------------------------------------
# CNet CN30BC Ethernet Card
card "CNet.*" "CN30BC"
	config	default "ed0" any 0x10
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp
	insert	/etc/pccard_ether $device
	remove	/etc/pccard_ether_remove $device

# DataTrek NetCard
card "DataTrek\." "NetCard"
	config	default "ed0" any 0x10
	ether	0xff0 00:20:e8
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp
	insert	/etc/pccard_ether $device
	remove	/etc/pccard_ether_remove $device

# D-Link DE-650 Ethernet Card
card ".*D-Link PC Ethernet Card.*" ".*"
	config	default "ed0" any 0x10
	ether	0x40 00:80:c8
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp
	insert	/etc/pccard_ether $device
	remove	/etc/pccard_ether_remove $device

# D-Link DE-650 Ethernet Card
card ".*" ".*D-Link PC Ethernet Card.*"
	config	default "ed0" any 0x10
	ether	0x40 00:80:c8
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp
	insert	/etc/pccard_ether $device
	remove	/etc/pccard_ether_remove $device

# Edimax Ethernet Combo
card "Edimax Technology Inc\." "PCMCIA"
	config	default "ed0" any 0x10
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp
	insert	/etc/pccard_ether $device
	remove	/etc/pccard_ether_remove $device

# EP-210 Ethernet Card
card "Ethernet PCMCIA adapter" "EP-210"
	config	default "ed0" any 0x10
	ether	0x110 00:40:33
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp
	insert	/etc/pccard_ether $device
	remove	/etc/pccard_ether_remove $device

# Katron PE-520 Ethernet Card
card "KCI" "PE520 PCMCIA Ethernet Adapter"
	config	default "ed0" any 0x10
	ether	0x110 00:40:f6
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp
	insert	/etc/pccard_ether $device
	remove	/etc/pccard_ether_remove $device

# Linksys Ethernet Card
card ".*E-CARD PC Ethernet Card.*" ".*"
	config	default "ed0" any 0x10
	insert	/etc/pccard_ether $device
	remove	/etc/pccard_ether_remove $device

# Linksys Ethernet Card
card ".*" ".*E-CARD PC Ethernet Card.*"
	config	default "ed0" any 0x10
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp
	insert	/etc/pccard_ether $device
	remove	/etc/pccard_ether_remove $device

# Linksys Ethernet Card
card "E-CARD" "E-CARD"
	config	default "ed0" any 0x10
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp
	insert	/etc/pccard_ether $device
	remove	/etc/pccard_ether_remove $device

# Maxtech PCN2000 Ethernet
card "MAXTECH" "PCN2000"
	config	default "ed0" any 0x10
	ether	0x5000 00:00:e8
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp
	insert	/etc/pccard_ether $device
	remove	/etc/pccard_ether_remove $device

# NE2000 Compatible Ethernet Card
card "NE2000 Compatible" "PCMCIA"
	config	default "ed0" any 0x10
	ether	0xff0 00:a0:0c
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp
	insert	/etc/pccard_ether $device
	remove	/etc/pccard_ether_remove $device

# RPTI EP400 Ethernet Card
card "RPTI LTD\." "EP400"
	config	default "ed0" any 0x10
	ether	0x110 00:40:95
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp
	insert	/etc/pccard_ether $device
	remove	/etc/pccard_ether_remove $device

# SMC EliteCard Ethernet
card "SMC" "PCM Ethernet Adapter"
	config	default "sn0" any
	ether	attr2hex
	insert	logger -s Untested card inserted. please e-mail the result to pao-report@clave.gr.jp
	insert	/etc/pccard_ether $device
	remove	/etc/pccard_ether_remove $device

# Socket EA LAN Adapter
# This card should not work because of its broken DMA status register, 
# if you have this card, please fix this bug.
card "Socket Communications Inc" "Socket EA PCMCIA LAN.*"
	# This card has broken CIS tupples
	# We can't use "default"
	config	0x1 "ed0" any 0x30
	ether	0x4000 00:c0:1b
	insert	/etc/pccard_ether $device
	remove	/etc/pccard_ether_remove $device

# -------------------------------------------------------------------
#
# "Wildcard" entries
#
# -------------------------------------------------------------------

# GENERIC PCMCIA modem
function serial
	config	auto "sio3" any
#	config	0x23 "sio3" any		# alternative definitions
#	config	0x21 "sio3" any		# .........
#	config	0x22 "sio3" any
#	config	0x23 "sio3" pio
#	config	0x21 "sio3" pio
#	config	0x22 "sio3" pio
#	config	0x23 "sio3" 5
#	config	0x21 "sio3" 5
#	config	0x22 "sio3" 5
#	reset	100			# default
	reset 	1000			# safety reset time
#	reset 	10000			# for unstable cards
	insert	logger -s PCMCIA Modem inserted
	remove	logger -s PCMCIA Modem removed

# GENERIC Flash ATA / ATA HDD
function fixed_disk
#	config	default "wdc1" 15
#	config	default "wdc1" any
#	config	0x03	"wdc1" 15
	config	0x03	"wdc1" any
	insert	logger -s Flash ATA / ATA HDD inserted
	remove	logger -s Flash ATA / ATA HDD removed

And here's the output of "pccardc dumpcis":
Code 128 not found
Code 128 not found
code Unknown ignored
Code 131 not found
Code 131 not found
code Unknown ignored
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
    000:  00 00 ff
	Common memory device information:
		Device number 1, type No device, WPS = OFF
		Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x15 (Version 1 info), length = 50
    000:  05 00 55 2e 53 2e 20 52 6f 62 6f 74 69 63 73 00
    010:  58 4a 2f 43 43 31 35 36 30 00 4d 65 67 61 68 65
    020:  72 74 7a 20 35 36 6b 62 70 73 20 4d 6f 64 65 6d
    030:  00 ff
	Version = 5.0, Manuf = [U.S. Robotics], card vers = [XJ/CC1560]
	Addit. info = [Megahertz 56kbps Modem]
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
    000:  02 01 2f 00
	PCMCIA ID = 0x102, OEM ID = 0x2f
Tuple #4, code = 0x21 (Functional ID), length = 2
    000:  02 01
	Serial port/modem - POST initialize
Tuple #5, code = 0x1a (Configuration map), length = 5
    000:  01 23 00 03 03
	Reg len = 2, config register addr = 0x300, last config = 0x23
	Registers: XX------ 
Tuple #6, code = 0x1b (Configuration entry), length = 16
    000:  e0 41 99 49 55 3e 3d aa 60 f8 03 07 30 ff ff 28
	Config index = 0x20(default)
	Interface byte = 0x41 (I/O)  +RDY/-BSY active
	Vcc pwr:
		Nominal operating supply voltage: 5 x 1V
		Continuous supply current: 3.5 x 100mA
		Power down supply current: 3.5 x 10mA
	Card decodes 10 address lines, 8 Bit I/O only
		I/O address # 1: block start = 0x3f8 block length = 0x8
		IRQ modes: Level
		IRQs:  0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
	Max twin cards = 0
	Misc attr: (Audio-BVD2) (Power down supported)
Tuple #7, code = 0x1b (Configuration entry), length = 7
    000:  21 08 aa 60 f8 02 07
	Config index = 0x21
	Card decodes 10 address lines, 8 Bit I/O only
		I/O address # 1: block start = 0x2f8 block length = 0x8
Tuple #8, code = 0x1b (Configuration entry), length = 7
    000:  22 08 aa 60 e8 03 07
	Config index = 0x22
	Card decodes 10 address lines, 8 Bit I/O only
		I/O address # 1: block start = 0x3e8 block length = 0x8
Tuple #9, code = 0x1b (Configuration entry), length = 7
    000:  23 08 aa 60 e8 02 07
	Config index = 0x23
	Card decodes 10 address lines, 8 Bit I/O only
		I/O address # 1: block start = 0x2e8 block length = 0x8
Tuple #10, code = 0x22 (Functional EXT), length = 4
    000:  00 02 0f 7c
	Serial interface extension:
		16550 UART, Parity - Space,Mark,Odd,Even
		Data bit - 7bit,8bit, Stop bit - 1bit,1.5bit,2bit
Tuple #11, code = 0x22 (Functional EXT), length = 9
    000:  01 1f 0f 00 06 00 00 06 00
	Modem interface capabilities:
Tuple #12, code = 0x22 (Functional EXT), length = 12
    000:  02 06 00 3f 1c 03 03 0f 07 00 02 b5
	Data modem services available:
Tuple #13, code = 0x22 (Functional EXT), length = 8
    000:  13 06 00 0f 00 02 00 b5
	Fax1/modem services available:
Tuple #14, code = 0x22 (Functional EXT), length = 8
    000:  23 06 00 0f 00 02 00 b5
	Fax2/modem services available:
Tuple #15, code = 0x0 (Null tuple), length = 10
    000:  02 01 2f 00 21 00 00 00 00 ff
Tuple #16, code = 0x0 (Null tuple), length = 14
    000:  31 30 36 47 31 36 52 38 32 4b 4d 57 00 ff
Tuple #17, code = 0x14 (No link), length = 0
Tuple #18, code = 0xff (Terminator), length = 0
2 slots found

And here's rc.conf:
#!/bin/sh
#

# This is rc.conf - a file full of useful variables that you can set 
# to change the default startup behavior of your system.  You should
# not edit this file!  Put any overrides into one of the ${rc_conf_files}
# instead and you will be able to update these defaults later without
# spamming your local configuration information.
#
# All arguments must be in double or single quotes.
#
#	$Id: rc.conf,v 1.1 1999/02/09 22:15:18 jkh Exp $

##############################################################
### Important initial Boot-time options  #####################
##############################################################

swapfile="NO"		# Set to name of swapfile if aux swapfile desired.
apm_enable="YES"	# Set to YES if you want APM enabled.
pccard_enable="YES"	# Set to YES if you want to configure PCCARD devices.
pccard_mem="DEFAULT"	# If pccard_enable=YES, this is card memory address.
pccard_ether="ed0 ep0 sn0 fe0"
pccard_beep="2"
ifconfig_common="DHCP"
ifconfig_ed0=$ifconfig_common
ifconfig_ep0=$ifconfig_common
ifconfig_sn0=$ifconfig_common
ifconfig_fe0=$ifconfig_common
local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d"	# startup script dirs.
local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs
rc_conf_files="/etc/rc.conf /etc/rc.conf.local"

##############################################################
###  Network configuration sub-section  ######################
##############################################################

### Basic network options: ###
hostname="myname.my.domain"	# Set this!
nisdomainname="NO"		# Set to NIS domain if using NIS (or NO).
firewall_enable="NO"		# Set to YES to enable firewall functionality
firewall_type="UNKNOWN"		# Firewall type (see /etc/rc.firewall)
firewall_quiet="NO"		# Set to YES to suppress rule display
natd_enable="NO"                # Enable natd (if firewall_enable == YES).
natd_interface="fxp0"           # Public interface to use with natd.
natd_flags=""                   # Additional flags for natd.
tcp_extensions="NO"		# Disallow RFC1323 extensions (or YES).
network_interfaces="lo0"	# List of network interfaces (lo0 is loopback).
ifconfig_lo0="inet 127.0.0.1"	# default loopback device configuration.
#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
#
# If you have any sppp(4) interfaces above, you might also want to set
# the following parameters.  Refer to spppcontrol(8) for their meaning.
sppp_interfaces=""		# List of sppp interfaces.
#sppp_interfaces="isp0"		# example: sppp over ISDN
#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"

### Network daemon (miscellaneous) & NFS options: ###
syslogd_enable="YES"		# Run syslog daemon (or NO).
syslogd_flags=""		# Flags to syslogd (if enabled).
inetd_enable="YES"		# Run the network daemon dispatcher (or NO).
inetd_flags=""			# Optional flags to inetd.
#
# named.  It may be possible to run named in a sandbox, man security for
# details.
#
named_enable="NO"		# Run named, the DNS server (or NO).
named_program="named"		# path to named, if you want a different one.
named_flags=""			# Flags for named
#named_flags="-u bind -g bind"	# Flags for named

kerberos_server_enable="NO"	# Run a kerberos master server (or NO).
kadmind_server_enable="NO"	# Run kadmind (or NO) -- do not run on
				# a slave kerberos server
kerberos_stash=""		# Is the kerberos master key stashed?
rwhod_enable="NO"		# Run the rwho daemon (or NO).
rwhod_flags=""			# Flags for rwhod
amd_enable="NO"			# Run amd service with $amd_flags (or NO).
amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map"
amd_map_program="NO"		# Can be set to "ypcat -k amd.master"
nfs_client_enable="NO"		# This host is an NFS client (or NO).
nfs_client_flags="-n 4"		# Flags to nfsiod (if enabled).
nfs_access_cache="2"		# Client cache timeout in seconds
nfs_server_enable="NO"		# This host is an NFS server (or NO).
nfs_server_flags="-u -t -n 4"	# Flags to nfsd (if enabled).
mountd_flags="-r"		# Flags to mountd (if NFS server enabled).
nfs_reserved_port_only="NO"	# Provide NFS only on secure port (or NO).
rpc_lockd_enable="NO"		# Run NFS rpc.lockd (*broken!*) if nfs_server.
rpc_statd_enable="YES"		# Run NFS rpc.statd if nfs_server (or NO).
portmap_enable="YES"		# Run the portmapper service (or NO).
portmap_flags=""		# Flags to portmap (if enabled).
rpc_ypupdated_enable="NO"	# Run if NIS master and SecureRPC (or NO).
keyserv_enable="NO"		# Run the SecureRPC keyserver (or NO).
keyserv_flags=""		# Flags to keyserv (if enabled).
rarpd_enable="NO"		# Run rarpd (or NO).
rarpd_flags=""			# Flags to rarpd.
xtend_enable="NO"		# Run the X-10 power controller daemon.
xtend_flags=""			# Flags to xtend (if enabled).

### Network Time Services options: ###
timed_enable="NO"		# Run the time daemon (or NO).
timed_flags=""			# Flags to timed (if enabled).
ntpdate_enable="NO"		# Run the ntpdate to sync time (or NO).
ntpdate_program="ntpdate"	# path to ntpdate, if you want a different one.
ntpdate_flags=""		# Flags to ntpdate (if enabled).
xntpd_enable="NO"		# Run xntpd Network Time Protocol (or NO).
xntpd_program="xntpd"		# path to xntpd, if you want a different one.
xntpd_flags="-p /var/run/xntpd.pid"	# Flags to xntpd (if enabled).

# Network Information Services (NIS) options: ###
nis_client_enable="NO"		# We're an NIS client (or NO).
nis_client_flags=""		# Flags to ypbind (if enabled).
nis_ypset_enable="NO"		# Run ypset at boot time (or NO).
nis_ypset_flags=""		# Flags to ypset (if enabled).
nis_server_enable="NO"		# We're an NIS server (or NO).
nis_server_flags=""		# Flags to ypserv (if enabled).
nis_ypxfrd_enable="NO"		# Run rpc.ypxfrd at boot time (or NO).
nis_ypxfrd_flags=""		# Flags to rpc.ypxfrd (if enabled).
nis_yppasswdd_enable="NO"	# Run rpc.yppasswdd at boot time (or NO).
nis_yppasswdd_flags=""		# Flags to rpc.yppasswdd (if enabled).

### Network routing options: ###
defaultrouter="NO"		# Set to default gateway (or NO).
static_routes=""		# Set to static route list (or leave empty).
gateway_enable="NO"		# Set to YES if this host will be a gateway.
router_enable="NO"		# Set to YES to enable a routing daemon.
router="routed"			# Name of routing daemon to use if enabled.
router_flags="-q"		# Flags for routing daemon.
mrouted_enable="NO"		# Do multicast routing (see /etc/mrouted.conf).
mrouted_flags=""		# Flags for multicast routing daemon.
ipxgateway_enable="NO"		# Set to YES to enable IPX routing.
ipxrouted_enable="NO"		# Set to YES to run the IPX routing daemon.
ipxrouted_flags=""		# Flags for IPX routing daemon.
arpproxy_all=""			# replaces obsolete kernel option ARP_PROXYALL.
forward_sourceroute="NO"	# do source routing (only if gateway_enable is set to "YES")
accept_sourceroute="NO"		# accept source routed packets to us

### ATM interface options: ###
atm_enable="NO"			# Configure ATM interfaces (or NO).
#atm_netif_hea0="atm 1"		# Network interfaces for physical interface.
#atm_sigmgr_hea0="uni31"	# Signalling manager for physical interface.
#atm_prefix_hea0="ILMI"		# NSAP prefix (UNI interfaces only) (or ILMI).
#atm_macaddr_hea0="NO"		# Override physical MAC address (or NO).
#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
#atm_scsparp_atm0="NO"		# Run SCSP/ATMARP on network interface (or NO).
atm_pvcs=""			# Set to PVC list (or leave empty).
atm_arps=""			# Set to permanent ARP list (or leave empty).

### ISDN interface options: ###
isdn_enable="NO"		# Enable the ISDN subsystem (or NO).
isdn_fsdev="/dev/ttyv4"		# Output device for fullscreen mode (or NO for daemon mode).
isdn_flags="-dn -d0x1f9"	# Flags for isdnd
isdn_trace="NO"			# Enable the ISDN trace subsystem (or NO).
isdn_traceflags="-f /var/tmp/isdntrace0"	# Flags for isdntrace

### Miscellaneous network options: ###
icmp_bmcastecho="NO"	# respond to broadcast ping packets


##############################################################
###  System console options  #################################
##############################################################

keymap="NO"		# keymap in /usr/share/syscons/keymaps/* (or NO).
keyrate="NO"		# keyboard rate to: slow, normal, fast (or NO).
keybell="NO"		# bell to duration.pitch or normal or visual (or NO).
keychange="NO"		# function keys default values (or NO).
cursor="NO"		# cursor type {normal|blink|destructive} (or NO).
scrnmap="NO"		# screen map in /usr/share/syscons/scrnmaps/* (or NO).
font8x16="NO"		# font 8x16 from /usr/share/syscons/fonts/* (or NO).
font8x14="NO"		# font 8x14 from /usr/share/syscons/fonts/* (or NO).
font8x8="NO"		# font 8x8 from /usr/share/syscons/fonts/* (or NO).
blanktime="300"		# blank time (in seconds) or "NO" to turn it off.
saver="NO"		# screen saver: Uses /modules/${saver}_saver.ko
moused_enable="YES"	# Run the mouse daemon.
moused_type="auto"	# See man page for rc.conf(5) for available settings.
moused_port="/dev/psm0" # Set to your mouse port.
moused_flags="-3"	# Any additional flags to moused.
allscreens_flags=""	# Set this vidcontrol mode for all virtual screens


##############################################################
###  Miscellaneous administrative options  ###################
##############################################################

cron_enable="YES"	# Run the periodic job daemon.
lpd_enable="NO"		# Run the line printer daemon.
lpd_flags=""		# Flags to lpd (if enabled).
usbd_enable="NO"	# Run the usbd daemon.
usbd_flags=""		# Flags to usbd (if enabled).
sendmail_enable="YES"	# Run the sendmail daemon (or NO).
sendmail_flags="-bd -q30m" # -bd is pretty mandatory.
dumpdev="NO"		# Device name to crashdump to (if enabled).
check_quotas="NO"	# Check quotas (or NO).
accounting_enable="NO"	# Turn on process accounting (or NO).
ibcs2_enable="NO"	# Ibcs2 (SCO) emulation loaded at startup (or NO).
linux_enable="NO"	# Linux emulation loaded at startup (or NO).
svr4_enable="NO"	# SysVR4 emulation loaded at startup (or NO).
rand_irqs="NO"		# Stir the entropy pool (like "5 11" or NO).
clear_tmp_enable="NO"	# Clear /tmp at startup.
ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib"
			# shared library search paths
ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout"
			# a.out shared library search paths
kern_securelevel_enable="NO"	# kernel security level (see init(8)), 
kern_securelevel="-1"	# range: -1..3 ; `-1' is the most insecure
update_motd="YES"	# update version info in /etc/motd (or NO)
vinum_drives=""		# put in names of disks containing vinum drives

##############################################################
### Allow local configuration override at the very end here ##
##############################################################
#
#

for i in ${rc_conf_files}; do
	if [ -f $i ]; then
        	. $i
	fi
done




>Description:
	
	When I installed PAO3 on my NEC Versa LX and tried to use a US Robotics 
	PCMCIA modem, it recognized the modem card and allocated it
	(i.e. short two-beep sequence then a higher-pitched multi-beep sequence)
	, but when I tried a "cu -l /dev/cuaa3", I couldn't get an OK response
	from the modem and the response when receiving a character is very slow
	in cu. Changing interrupts used has no effect. The only thing that
	makes it work is using polled I/O.





>How-To-Repeat:

	Install PAO3-19990329-beta out of the box and try to access a PCMCIA
	modem.

>Fix:
	
	


>Release-Note:
>Audit-Trail:
>Unformatted:


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199904300044.TAA00753>