Date: Fri, 12 Dec 2003 22:29:20 -0800 (PST) From: "S.Mehdi Sheikhalishahi" <sm_justice@yahoo.com> To: freebsd-questions@freebsd.org Subject: Vim Shared OBject. Message-ID: <20031213062920.15472.qmail@web41314.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hi All
I installed FreeBSD in my box.I want to start vim
editor
but the following error occurred.I think I must set
approprite path to Shared OBject library path.Please
Help me.
/usr/libexec/ld-elf.so.1: Shared object "libc.so.6"
not found.
My FreeBSD specification is :
bash-2.05# uname -a
FreeBSD cabinet.amnafzar.com 4.3-RELEASE FreeBSD
4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
i386
bash-2.05# dmesg
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California.
All rights reserved.
FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (233.86-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 50331648 (49152K bytes)
avail memory = 44650496 (43604K bytes)
Preloaded elf kernel "kernel" at 0xc044d000.
Intel Pentium detected, installing workaround for F00F
bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0
on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port
0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port
0x6300-0x631f irq 11 at de
vice 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on
uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller>
port 0x5f00-0x5f0f at device
7.3 on pci0
pci0: <S3 ViRGE DX/GX graphics accelerator> at 11.0
irq 10
xl0: <3Com 3c905C-TX Fast Etherlink XL> port
0x6400-0x647f mem 0xe4000000-0xe400
007f irq 11 at device 12.0 on pci0
xl0: Ethernet address: 00:04:79:68:0c:d9
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 19470MB <QUANTUM FIREBALLlct15 20> [39560/16/63]
at ata0-master UDMA33
acd0: CDROM <CRD-8480B> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad0s3a
WARNING: / was not properly dismounted
pid 472 (vim), uid 0: exited on signal 11 (core
dumped)
__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031213062920.15472.qmail>