Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 31 Jan 2004 13:54:22 +0100
From:      Peter Wullinger <some-mail-drop@gmx.net>
To:        freebsd-current@freebsd.org
Subject:   CMD/SiI 649 ATA Controller Problems
Message-ID:  <20040131125422.GA657@peter.home.wul>
In-Reply-To: <20040128132021.GA1697@peter.home.wul>
References:  <20040125111743.GA564@bsd> <401672F7.8080404@noc.ntua.gr> <20040128132021.GA1697@peter.home.wul>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jan 28, 2004 at 02:20:21PM +0100, Peter Wullinger wrote:
> 
> Make that three ... on a different controller, though:
> 
> atapci1: <CMD 649 UDMA100 controller> port \
> 	0x8800-0x880f,0x9000-0x9003,0x9400-0x9407,0x9800-0x9803,0xa000-0xa007 \
> 	irq 10 at device 11.0 on pci0
> cd1 at ata2 bus 0 target 0 lun 0
> cd1: <PHILIPS CDRW48P P1.6> Removable CD-ROM SCSI-0 device 
> cd1: 16.000MB/s transfers
> 
> -- snip --

I finally managed to get some more diagnostics about my
problem here:
"boot -v" output of a RELENG_5_2 kernel from today (2004-01-31):

ata2-master: pio = 0x0c, wdma = 0x22, udma = 0x42, cable = 40 pin
(probe0: ata0:0:0:0): error 22
(probe0: ata0:0:0:0): Unretryable Error
(probe1: ata0:0:1:0): Unretryable Error
(probe1: ata0:0:1:0): Unretryable Error
[...]
(probe3: ata1:0:1:0): Retrying Command
(probe3: ata1:0:1:0): error 22
(probe3: ata1:0:1:0): Unretryable Error
[... and so on]

Removing atapci1 (the CMD 649, see below) fixes the problem
and makes the system come up without any further complaints.

I will try to test with a different controller soon and
report on the results.

Cheers,
	Peter

---
% dmesg | grep ata
atapci0: <VIA 82C686B UDMA100 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
atapci1: <CMD 649 UDMA100 controller> port 0x8800-0x880f,0x9000-0x9003,0x9400-0x9407,0x9800-0x9803,0xa000-0xa007 irq 10 at device 11.0 on pci0
ata2: at 0xa000 on atapci1
ata3: at 0x9400 on atapci1
ad0: 117800MB <IC35L120AVV207-1> [239340/16/63] at ata0-master UDMA100
ad1: 117800MB <IC35L120AVV207-1> [239340/16/63] at ata0-slave UDMA100
cd0 at ata1 bus 0 target 0 lun 0
cd1 at ata2 bus 0 target 0 lun 0
da0 at ata1 bus 0 target 1 lun 0
---
% atacontrol list
ATA channel 0:
	Master:  ad0 <IC35L120AVV207-1/V24OA66A> ATA/ATAPI rev 6
	Slave:   ad1 <IC35L120AVV207-1/V24OA66A> ATA/ATAPI rev 6
ATA channel 1:
	Master: atap <MATSHITADVD-ROM SR-8585/1X32> ATA/ATAPI rev 0
	Slave:  atap <IOMEGA ZIP 250 ATAPI/51.G> ATA/ATAPI rev 0
ATA channel 2:
	Master: atap <PHILIPS CDRW48P/P1.6> ATA/ATAPI rev 0
	Slave:       no device present
ATA channel 3:
	Master:      no device present
	Slave:       no device present
	



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040131125422.GA657>