Date: Wed, 7 Nov 2001 20:52:33 -0800 From: Gunnar H Reichert-Weygold <patron1@paganlibrary.com> To: edscott@imp.mx, freebsd-questions@freebsd.org Subject: Re: moving bktr0 from 4.3 to 4.4 Message-ID: <E161hBD-0006sl-00@raven.mail.pas.earthlink.net> In-Reply-To: <200111071609.KAA89580@www.imp.mx> References: <200111071609.KAA89580@www.imp.mx>
next in thread | previous in thread | raw e-mail | index | archive | help
Personally, I prefer fxtv. Check LINT: # Brooktree driver has been ported to the new I2C framework. Thus, # you'll need to have the following 3 lines in the kernel config. # device smbus # device iicbus # device iicbb # The iic and smb devices are only needed if you want to control other # I2C slaves connected to the external connector of some cards. # device bktr My own cofig shows: device bktr options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC device smb device smbus device iicbus device iicbb device ic device iic device iicsmb # smb over i2c bridge It's probably overkill, but it works quite well. DMESG: bktr0: <BrookTree 878> mem 0xef021000-0xef021fff irq 11 at device 13.0 on pci0 iicbb0: <I2C generic bit-banging driver> on bti2c0 iicbus0: <Philips I2C bus> on iicbb0 master-only iicsmb0: <I2C to SMB bridge> on iicbus0 smbus0: <System Management Bus> on iicsmb0 smb0: <SMBus general purpose I/O> on smbus0 iic0: <I2C general purpose I/O> on iicbus0 smbus1: <System Management Bus> on bti2c0 smb1: <SMBus general purpose I/O> on smbus1 bktr0: AVer Media TV/FM, Philips NTSC tuner. pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 13.1 irq 11 On Wednesday 07 November 2001 08:06, you wrote: > Hi, > > I have my TV card working perfectly under FreeBSD 4.3 with xawtv, but > trying to migrate to FreeBSD 4.4 I cannot get it to work. I compiled the > kernel with the following lines: > > device iicbus0 > device iicbb0 > device bktr0 > > The card is detected, and I get this from dmesg: > > bktr0: <BrookTree 878> mem 0xeddfe000-0xeddfefff irq 10 at device 9.0 on > pci0 bktr0: Pinnacle/Miro TV, Philips NTSC tuner. > pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 9.1 irq 10 > > But when I execute xawtv I get: > > This is xawtv-3.37, running on FreeBSD/i386 (4.4-RELEASE) > Xlib: extension "XVideo" missing on display ":0.0". > x11: 1024x768, 32 bit/pixel, 0 byte/scanline > bktr: pf: rgb bpp=2 mask=31744,992,31 sbytes=0 sshorts=0 (fmt=5) > bktr: pf: rgb bpp=2 mask=31744,992,31 sbytes=1 sshorts=0 (fmt=3) > bktr: pf: rgb bpp=2 mask=63488,2016,31 sbytes=0 sshorts=0 (fmt=6) > bktr: pf: rgb bpp=2 mask=63488,2016,31 sbytes=1 sshorts=0 (fmt=4) > bktr: pf: rgb bpp=3 mask=16711680,65280,255 sbytes=1 sshorts=0 (fmt=7) > bktr: pf: rgb bpp=4 mask=16711680,65280,255 sbytes=0 sshorts=0 (fmt=10) > bktr: pf: rgb bpp=4 mask=16711680,65280,255 sbytes=0 sshorts=1 (fmt=-1) > bktr: pf: rgb bpp=4 mask=16711680,65280,255 sbytes=1 sshorts=0 (fmt=-1) > bktr: pf: rgb bpp=4 mask=16711680,65280,255 sbytes=1 sshorts=1 (fmt=8) > bktr: pf: yuv h422 v111 (planar) (fmt=14) > bktr: pf: yuyv h422 v111 (packed) (fmt=13) > bktr: pf: yuv h422 v422 (planar) (fmt=-1) > ioctl METEORGSUPPIXFMT: Invalid argument > wmhooks: netwm > Warning: Cannot convert string "-*-ledfixed-medium-r-semicondensed--39-*" > to type FontStruct > > Any pointers to solve this problem would be greatly appreciated. > > > Edscott Wilson Garcia > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Don't give me that "kinkier than thou" attitude. Above address is an autoresponder! Correct email address: patron1 at paganlibrary dot com Gunnar H Reichert-Weygold http://www.paganlibrary.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E161hBD-0006sl-00>