Date: Mon, 27 Aug 2012 22:07:26 +0200 From: Per olof Ljungmark <peo@intersonic.se> To: John Baldwin <jhb@freebsd.org> Cc: Kurt Jaeger <lists@c0mplx.org>, freebsd-stable@freebsd.org, Martin Dieringer <martin.dieringer@gmx.de> Subject: Re: Thinkpad X61s cannot boot 9.1-BETA1 Message-ID: <503BD37E.9070801@intersonic.se> In-Reply-To: <201208271354.17832.jhb@freebsd.org> References: <5007CFE6.6030808@intersonic.se> <503A57DB.3020503@intersonic.se> <alpine.BSF.2.00.1208270057280.2456@thinkpad.nowhere.local> <201208271354.17832.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2012-08-27 19:54, John Baldwin wrote: > On Sunday, August 26, 2012 6:59:22 pm Martin Dieringer wrote: >> On Sun, 26 Aug 2012, Per olof Ljungmark wrote: >> >>> On 08/26/12 18:37, Kurt Jaeger wrote: >>>> Hi! >>>> >>>>> On our X61s's setting 'debug.acpi.disabled="hostres"' does not change >>>>> the inability to boot 9-BETA1, 9-RC1 or -current. >>>> >>>> I tested 9.1-RC1 on X61, and it worked without any troubles. >>>> >>> >>> Yes, it does on this one too if I install a mechanical disk. The problem > is >>> related to installing on a SSD drive, Kingston SSDNow SV200S37A/128G. >>> >>> This must be related to a change in the base system some time between >>> 9.0-RELEASE and -BETA1 as 9.0 runs and installs fine. Perhaps someone > could >>> suggest anther SSD drive with equal capacity that works? >> >> >> debug.acpi.disabled="hostres" fixed it for me on T61 and T410 >> with normal HD and (older) SSD (OCZ Summit) >> >> FreeBSD 9.1-PRERELEASE #16: Tue Aug 21 > > Can you get a verbose dmesg both with and without the "hostres" setting? > OK, will post tomorrow, a quick check with "debug.acpi.disabled="hostres"" yields same output excluding the "ata0: reset ..." lines.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?503BD37E.9070801>