Date: Thu, 13 Mar 2008 10:10:02 GMT From: Leon Kos <leon.kos@lecad.uni-lj.si> To: freebsd-acpi@FreeBSD.org Subject: Re: kern/121558: Supermicro X7SB4 Fatal trap 12 when ACPI disabled Message-ID: <200803131010.m2DAA2V0052515@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/121558; it has been noted by GNATS.
From: Leon Kos <leon.kos@lecad.uni-lj.si>
To: John Baldwin <jhb@freebsd.org>
Cc: Volker <volker@vwsoft.com>, freebsd-acpi@freebsd.org,
bug-followup@freebsd.org
Subject: Re: kern/121558: Supermicro X7SB4 Fatal trap 12 when ACPI disabled
Date: Thu, 13 Mar 2008 11:07:41 +0100 (CET)
Previously I've added hints to /boot/loader.conf and booted GENERIC with
ACPI disabled. Moving hints to /boot/device.hints does not help!
That's why I've asked if the syntax:
hw.pci13.0.INTA.irq="16"
hw.pci15.0.INTA.irq="17"
hw.pci5.0.INTA.irq="19"
is correct?
I am still getting "No I/O APIC 0 to route interrupt to" as shown in
http://www.lecad.uni-lj.si/~leon/other/x7sb4/img_1650.jpg
I've also tried to boot OpenSUSE 10.3 that has kernel 2.6.21.5-31 and it
boots with or without ACPI.
http://www.lecad.uni-lj.si/~leon/other/x7sb4/img_1651.jpg shows dmesg and
/proc/interrupts with acpi=off
http://www.lecad.uni-lj.si/~leon/other/x7sb4/img_1652.jpg is the same with
enabled ACPI (default)
Linux appears to work well with this board. Even handles reboot well while
FreeBSD 7.0 after upgrade does not as I staded before and shown in photo
http://www.lecad.uni-lj.si/~leon/other/x7sb4/img_1637.jpg
Kind regards!
Leon Kos, CAD lab, Mech.Eng., University of Ljubljana, Slovenia
(http://www.lecad.uni-lj.si/~leon)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200803131010.m2DAA2V0052515>