Date: Sun, 27 Sep 2009 15:12:37 GMT From: Takao TAGAMI <tahkun-GNATS@milkcup.jp> To: freebsd-gnats-submit@FreeBSD.org Subject: ports/139188: When "kldload vboxdrv.ko" is done, panic kernel is done. Message-ID: <200909271512.n8RFCbel049633@www.freebsd.org> Resent-Message-ID: <200909271520.n8RFK160001072@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 139188
>Category: ports
>Synopsis: When "kldload vboxdrv.ko" is done, panic kernel is done.
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-ports-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Sep 27 15:20:01 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: Takao TAGAMI
>Release: FreeBSD 7.2-RELEASE
>Organization:
milkcup
>Environment:
$ uname -a
FreeBSD bernard.milkcup.jp 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009 root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
>Description:
1.If "kldload vboxdrv.ko" is executed to execute emurator/virtualbox, kernel panic is generated.
2.panic message
xvebronxedlr vt:r afpA s1y2n cw=i0t ho fifnMtienr=r0uxp1tcs8 doifsfaMbalxe=d0
892
Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x0
fault code = supervisor read, page not present
instruction pointer = 0x20:0x0
stack pointer = 0x28:0xc53cec0c
frame pointer = 0x28:0xc53cec28
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = resume, IOPL = 0
current process = 11 (idle: cpu1)
trap number = 12
panic: page fault
cpuid = 1
Uptime: 11m27s
Physical memory: 2026 MB
Dumping 76 MB: 61 45 29 13
Dump complete
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
Rebooting...
cpu_reset: Stopping other CPUs
cpu_reset: Restarting BSP
cpu_reset_proxy: Stopped CPU 1
3.My PC information
CPU: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2669.69-MHz 686-class CPU)
Memory: 2GB
Mother Board: G33 neo(http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1224)
4.dmesg when "boot -v" is executed
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009
root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e67000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e67194.
Calibrating clock(s) ... i8254 clock: 1193180 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2669687136 Hz
CPU: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz (2669.69-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 4096 kbytes, 16-way associative, 64 bytes/line
real memory = 2137718784 (2038 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001025000 - 0x000000007d284fff, 2082865152 bytes (508512 pages)
avail memory = 2082213888 (1985 MB)
Table 'FACP' at 0x7f6b0200
Table 'APIC' at 0x7f6b0390
MADT: Found table at 0x7f6b0390
MP Configuration Table version 1.4 found at 0xc00fc740
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 130 ACPI ID 3: disabled
MADT: Found CPU APIC ID 131 ACPI ID 4: disabled
ACPI APIC Table: <021908 APIC1538>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f5cb0
pnpbios: Entry = f0000:6d8a Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu group 1
ULE: setup cpu 1
ULE: adding cpu 1 to group 1: cpus 1 mask 0x2
ACPI: RSDP @ 0x0xf9a90/0x0014 (v 0 ACPIAM)
ACPI: RSDT @ 0x0x7f6b0000/0x003C (v 1 021908 RSDT1538 0x20080219 MSFT 0x00000097)
ACPI: FACP @ 0x0x7f6b0200/0x0084 (v 1 021908 FACP1538 0x20080219 MSFT 0x00000097)
ACPI: DSDT @ 0x0x7f6b0440/0x5564 (v 1 0AAAA 0AAAA000 0x00000000 INTL 0x20051117)
ACPI: FACS @ 0x0x7f6be000/0x0040
ACPI: APIC @ 0x0x7f6b0390/0x006C (v 1 021908 APIC1538 0x20080219 MSFT 0x00000097)
ACPI: MCFG @ 0x0x7f6b0400/0x003C (v 1 021908 OEMMCFG 0x20080219 MSFT 0x00000097)
ACPI: OEMB @ 0x0x7f6be040/0x0071 (v 1 021908 OEMB1538 0x20080219 MSFT 0x00000097)
ACPI: GSCI @ 0x0x7f6be0c0/0x2024 (v 1 021908 GMCHSCI 0x20080219 MSFT 0x00000097)
ACPI: SSDT @ 0x0x7f6c0a10/0x0A7C (v 1 DpgPmm CpuPm 0x00000012 INTL 0x20051117)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (May 1 2009 08:47:24)
npx0: INT 16 interface
acpi0: <021908 RSDT1538> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc5077000 pa 0x1000
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=29c08086)
pcibios: BIOS version 3.00
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.FHR0 -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7f600000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 5
Validation 0 5 N 0 5
After Disable 0 255 N 0 5
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 14 N 0 3 4 6 7 10 11 12 14 15
Validation 0 14 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 3 4 6 7 10 11 12 14 15
Validation 0 15 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3 4 6 7 10 11 12 14 15
Validation 0 3 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 3 4 6 7 10 11 12 14 15
Validation 0 7 N 0 3 4 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x29c0, revid=0x02
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x29c1, revid=0x02
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x29c2, revid=0x02
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 32, base 0xfe980000, size 19, enabled
map[14]: type I/O Port, range 32, base 0xcc00, size 3, enabled
map[18]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, enabled
map[1c]: type Memory, range 32, base 0xfe800000, size 20, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2937, revid=0x02
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type I/O Port, range 32, base 0xc880, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2938, revid=0x02
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=15
map[20]: type I/O Port, range 32, base 0xc800, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x293c, revid=0x02
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=14
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfe97bc00, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x293e, revid=0x02
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfe974000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x2940, revid=0x02
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0104, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x2948, revid=0x02
domain=0, bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x294a, revid=0x02
domain=0, bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2934, revid=0x02
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
map[20]: type I/O Port, range 32, base 0xc480, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2935, revid=0x02
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type I/O Port, range 32, base 0xc400, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2936, revid=0x02
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=14
map[20]: type I/O Port, range 32, base 0xc080, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x2939, revid=0x02
domain=0, bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
map[20]: type I/O Port, range 32, base 0xc000, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x293a, revid=0x02
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfe97b800, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0x92
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0104, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2918, revid=0x02
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2921, revid=0x02
domain=0, bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xbc00, size 3, enabled
map[14]: type I/O Port, range 32, base 0xb880, size 2, enabled
map[18]: type I/O Port, range 32, base 0xb800, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xb480, size 2, enabled
map[20]: type I/O Port, range 32, base 0xb400, size 4, enabled
map[24]: type I/O Port, range 32, base 0xb080, size 4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2930, revid=0x02
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[10]: type Memory, range 64, base 0xfe97b400, size 8, enabled
map[20]: type I/O Port, range 32, base 0x400, size 5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x2926, revid=0x02
domain=0, bus=0, slot=31, func=5
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xac00, size 3, enabled
map[14]: type I/O Port, range 32, base 0xa880, size 2, enabled
map[18]: type I/O Port, range 32, base 0xa800, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xa480, size 2, enabled
map[20]: type I/O Port, range 32, base 0xa400, size 4, enabled
map[24]: type I/O Port, range 32, base 0xa080, size 4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x0-0x0
pcib1: no prefetched decode
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P2 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
vgapci0: <VGA-compatible display> port 0xcc00-0xcc07 mem 0xfe980000-0xfe9fffff,0xd0000000-0xdfffffff,0xfe800000-0xfe8fffff irq 16 at device 2.0 on pci0
agp0: <Intel G33 SVGA controller> on vgapci0
vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000
vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xfe980000
vgapci0: Reserved 0x100000 bytes for rid 0x1c type 3 at 0xfe800000
agp0: detected 7164k stolen memory
agp0: aperture size is 256M
uhci0: <UHCI (generic) USB controller> port 0xc880-0xc89f irq 16 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc880
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xc800-0xc81f irq 21 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc800
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe97bc00-0xfe97bfff irq 18 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfe97bc00
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xd000-0xdfff
pcib3: memory decode 0xfea00000-0xfeafffff
pcib3: no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x11ab, dev=0x6121, revid=0xb1
domain=0, bus=3, slot=0, func=0
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D3 current D0
MSI supports 1 message
map[10]: type I/O Port, range 32, base 0xdc00, size 3, enabled
pcib3: requested I/O range 0xdc00-0xdc07: in range
map[14]: type I/O Port, range 32, base 0xd880, size 2, enabled
pcib3: requested I/O range 0xd880-0xd883: in range
map[18]: type I/O Port, range 32, base 0xd800, size 3, enabled
pcib3: requested I/O range 0xd800-0xd807: in range
map[1c]: type I/O Port, range 32, base 0xd480, size 2, enabled
pcib3: requested I/O range 0xd480-0xd483: in range
map[20]: type I/O Port, range 32, base 0xd400, size 4, enabled
pcib3: requested I/O range 0xd400-0xd40f: in range
map[24]: type Memory, range 32, base 0xfeaffc00, size 10, enabled
pcib3: requested memory range 0xfeaffc00-0xfeafffff: good
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
atapci0: <Marvell 88SX6121 UDMA133 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci3
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd400
atapci0: [MPSAFE]
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xdc00
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd880
ata2: reset tp1 mask=03 ostat0=50 ostat1=50
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb
ata2: reset tp2 stat0=50 stat1=10 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xe000-0xefff
pcib4: memory decode 0xfeb00000-0xfebfffff
pcib4: no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
found-> vendor=0x10ec, dev=0x8168, revid=0x01
domain=0, bus=4, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xe800, size 8, enabled
pcib4: requested I/O range 0xe800-0xe8ff: in range
map[18]: type Memory, range 64, base 0xfebff000, size 12, enabled
pcib4: requested memory range 0xfebff000-0xfebfffff: good
pcib4: matched entry for 4.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 17
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff irq 17 at device 0.0 on pci4
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfebff000
re0: MSI count : 2
re0: attempting to allocate 1 MSI vectors (2 supported)
msi: routing MSI IRQ 256 to vector 52
re0: using IRQ 256 for MSI
re0: Using 1 MSI messages
re0: Chip rev. 0x38000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:19:db:63:f5:8f
re0: [MPSAFE]
re0: [FILTER]
uhci2: <UHCI (generic) USB controller> port 0xc480-0xc49f irq 23 at device 29.0 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc480
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 53
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xc400-0xc41f irq 19 at device 29.1 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc400
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 54
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xc080-0xc09f irq 18 at device 29.2 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc080
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xc000-0xc01f irq 16 at device 29.3 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc000
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe97b800-0xfe97bbff irq 23 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfe97b800
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb3 usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 8 ports with 8 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0x0-0x0
pcib5: no prefetched decode
pcib5: Subtractively decoded bridge.
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f,0xb080-0xb08f irq 19 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb400
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xb080
ata3: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xbc00
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xb880
ata3: reset tp1 mask=03 ostat0=50 ostat1=00
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xb800
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb480
ata4: reset tp1 mask=03 ostat0=7f ostat1=7f
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata4: reset tp2 stat0=ff stat1=ff devices=0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH9 SATA300 controller> port 0xac00-0xac07,0xa880-0xa883,0xa800-0xa807,0xa480-0xa483,0xa400-0xa40f,0xa080-0xa08f irq 19 at device 31.5 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xa400
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x10 bytes for rid 0x24 type 4 at 0xa080
ata5: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xac00
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xa880
ata5: reset tp1 mask=03 ostat0=7f ostat1=7f
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata5: reset tp2 stat0=ff stat1=ff devices=0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xa800
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xa480
ata6: reset tp1 mask=03 ostat0=7f ostat1=7f
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata6: reset tp2 stat0=ff stat1=ff devices=0x0
ata6: [MPSAFE]
ata6: [ITHREAD]
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - 72, should be 71 [20070320]
ACPI: SSDT @ 0x0x7f6c00f0/0x0235 (v 1 DpgPmm P001Ist 0x00000011 INTL 0x20051117)
cpu0: switching to generic Cx mode
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (1828, 2090)
est0: Invalid freq 2336, ignored.
est0: Invalid id16 (set, cur) = (1565, 2090)
est0: Invalid freq 2003, ignored.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 82a082a0600082a
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ex_isa_identify()
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcb800-0xcdfff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 56
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 57
ata1: [MPSAFE]
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 58
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 133523 -> 100000
procfs registered
lapic: Divisor 2, Frequency 166855464 hz
Timecounter "TSC" frequency 2669687136 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata2-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: DMA limited to UDMA33, device found non-ATA66 cable
ad4: 157066MB <Hitachi HDS721616PLAT80 P22OA60A> at ata2-master UDMA33
ad4: 321672960 sectors [319120C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
acd0: <ATAPI CDROM/V100Y> CDROM drive at ata2 as slave
acd0: 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire
ad6: 19541MB <Maxtor 92049U4 FA500S60> at ata3-master SATA150
ad6: 40020624 sectors [39703C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad6
ad6: Intel check1 failed
ad6: Adaptec check1 failed
ad6: LSI (v3) check1 failed
ad6: LSI (v2) check1 failed
ad6: FreeBSD check1 failed
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 1
ioapic0: Assigning ISA IRQ 15 to local APIC 0
ioapic0: Assigning PCI IRQ 16 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 1
ioapic0: Assigning PCI IRQ 21 to local APIC 0
ioapic0: Assigning PCI IRQ 23 to local APIC 1
msi: Assigning MSI IRQ 256 to local APIC 0
GEOM_LABEL: Label for provider ad6s1a is ufsid/4abab6460f436417.
GEOM_LABEL: Label for provider ad6s1d is ufsid/4abab6477ff1891d.
GEOM_LABEL: Label for provider ad6s1e is ufsid/4abab648583ee709.
GEOM_LABEL: Label for provider ad6s1f is ufsid/4abab64856cf02ce.
GEOM_LABEL: Label for provider ad6s1g is ufsid/4abab647cf63ef54.
Trying to mount root from ufs:/dev/ad6s1a
start_init: trying /sbin/init
GEOM_LABEL: Label ufsid/4abab6460f436417 removed.
GEOM_LABEL: Label for provider ad6s1a is ufsid/4abab6460f436417.
GEOM_LABEL: Label ufsid/4abab647cf63ef54 removed.
GEOM_LABEL: Label for provider ad6s1g is ufsid/4abab647cf63ef54.
GEOM_LABEL: Label ufsid/4abab6477ff1891d removed.
GEOM_LABEL: Label for provider ad6s1d is ufsid/4abab6477ff1891d.
GEOM_LABEL: Label ufsid/4abab64856cf02ce removed.
GEOM_LABEL: Label for provider ad6s1f is ufsid/4abab64856cf02ce.
GEOM_LABEL: Label ufsid/4abab648583ee709 removed.
GEOM_LABEL: Label for provider ad6s1e is ufsid/4abab648583ee709.
GEOM_LABEL: Label ufsid/4abab6460f436417 removed.
GEOM_LABEL: Label ufsid/4abab647cf63ef54 removed.
GEOM_LABEL: Label ufsid/4abab6477ff1891d removed.
GEOM_LABEL: Label ufsid/4abab64856cf02ce removed.
GEOM_LABEL: Label ufsid/4abab648583ee709 removed.
5.coredump
http://www.milkcup.jp/vmcore.tar.bz2
>How-To-Repeat:
Whenever "kldload vboxdrv.ko" is executed, it reproduces it.
>Fix:
none
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200909271512.n8RFCbel049633>