Date: Mon, 24 Feb 2003 19:06:01 +0100 From: Arne Steinkamm <arne@Steinkamm.COM> To: freebsd-sparc@freebsd.org Cc: arne@steinkamm.com Subject: Problem booting E250 / SCSI errors Message-ID: <20030224180601.GA21547@steinkamm.com>
next in thread | raw e-mail | index | archive | help
Hello,
I try to install 5.0-release on an E250.
System is as empty as possible.
The system goes immediately in an endless loop telling me, that
sym0:9: No MSG OUT phase after selection with ATN.
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
I tried to read and understand the code in the source but, I have to admit,
the SCSI background is missing, so I'm not able to find a workaround here.
How can I "boot -c" the system -- to speak in x86 terms -- to try it without
sym0?
Another question, related to the project I'm currently working on:
Is FreeBSD/sparc64 ready now to be used as a production mailserver ?
I have this spare machine and the hardware fits the problem pretty well but
I really do not want to support sendmail&friends on solaris.
OpenBSD has no SMP support (currently only one CPU installed 'cause debugging)
and NetBSD made me a little sad the last weeks...
Thanks in advance
.//. Arne
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #0: Fri Jan 17 20:03:38 GMT 2003
root@numenor.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0880000.
Preloaded mfs_root "/boot/mfsroot" at 0xc08801a0.
Timecounter "tick" frequency 400000000 Hz
cpu0: Sun Microsystems UltraSparc-II Processor (400.00 MHz CPU)
Model: SUNW,Ultra-250
Initializing GEOMetry subsystem
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xc047c958
nexus0: <OpenFirmware Nexus device>
nexus0: <associations>, type (unknown) (no driver attached)
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Psycho, impl 0, version 4, ign 7c0 initialializing counter-timer
Timecounter "counter-timer" frequency 1000000 Hz
DVMA map: 0xfe000000 to 0xffffffff
device 0/1/0: latency timer 10 -> 82
pcib0: ofw_pci_init: no interrupt mapping found for 0/1/0 (preset 0)
device 0/1/1: latency timer 10 -> 82
pcib0: ofw_pci_init: mapping intr for 0/1/1 to 33 (preset was 0)
device 0/3/0: latency timer 17 -> 140
pcib0: ofw_pci_init: mapping intr for 0/3/0 to 32 (preset was 0)
device 0/3/1: latency timer 17 -> 140
pcib0: ofw_pci_init: mapping intr for 0/3/1 to 38 (preset was 0)
pci0: <PCI bus> on pcib0
ebus0: revision 0x01
ebus0: <PCI-EBus2 bridge> mem 0x71000000-0x717fffff,0x70000000-0x70ffffff at device 1.0 on pci0
ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached)
ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached)
ebus0: <se> addr 0x1400400000-0x140040007f irq 43 (no driver attached)
ebus0: <se> addr 0x1400200000-0x140020007f irq 35 (no driver attached)
ebus0: <su> addr 0x14003083f8-0x14003083ff irq 41 (no driver attached)
ebus0: <su> addr 0x14003062f8-0x14003062ff irq 33 (no driver attached)
ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x14003043bc-0x14003043cb irq 33 (no driver attached)
eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 80e71b36
ebus0: <flashprom> addr 0x1000000000-0x10000fffff,0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,envctrltwo> addr 0x1400600000-0x1400600003 irq 37,40 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x8000-0xffff irq 33 at device 1.1 on pci0
hme0: Ethernet address: 08:00:20:e7:1b:36
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <875> port 0x400-0x4ff mem 0x12000-0x12fff,0x10000-0x100ff irq 32 at device 3.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875> port 0x800-0x8ff mem 0x16000-0x16fff,0x14000-0x140ff irq 38 at device 3.1 on pci0
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
pcib1: <U2P UPA-PCI bridge> on nexus0
pcib1: Psycho, impl 0, version 4, ign 7c0 pci1: <PCI bus> on pcib1
nexus0: <rsc>, type system-service-processor (no driver attached)
nexus0: <mc>, type memory-controller (no driver attached)
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
sym0:9: No MSG OUT phase after selection with ATN.
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:9: No MSG OUT phase after selection with ATN.
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
sym0:9: No MSG OUT phase after selection with ATN.
(noperiph:sym0:0:-1:-1): SCSI BUS reset detected.
...
--
Arne Steinkamm | Mail (MIME): arne@steinkamm.com IRC: Arne
Tel.: +49.89.299.756 | URL: http://WWW.Steinkamm.COM/ NIC-Handle: AS306
Laendstrasse 4 | PGP KeyID: AAB3844D PGP fingerprint:
80538 Muenchen GERMANY | 7B EE D6 05 0E C8 33 DC C1 2D 1D 49 8A 98 DF 26
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-sparc" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030224180601.GA21547>