Date: Mon, 23 Feb 2009 12:00:30 +1030 From: "Daniel O'Connor" <doconnor@gsoft.com.au> To: freebsd-stable@freebsd.org Subject: Intel Q45 problems on 7.1-STABLE Message-ID: <200902231200.38164.doconnor@gsoft.com.au>
next in thread | raw e-mail | index | archive | help
--nextPart2141986.bPZGNLoyN5 Content-Type: multipart/mixed; boundary="Boundary-01=_3wfoJyQYFyreFOj" Content-Transfer-Encoding: 7bit Content-Disposition: inline --Boundary-01=_3wfoJyQYFyreFOj Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi, I recently got an Intel DQ45CB based system and I am trying to use the onbo= ard=20 video. Initially it hung solid when X started, however when I reduced the amount o= f=20 RAM to 2Gb it worked OK. Unfortunately if I exit X, or go to the text conso= le=20 and back to X then the machine locks solid (no numlock, have to hard reset). I note that dmesg reports 32764k of stolen memory, however I set the DVMT R= AM=20 to 128Mb (and 256Mb, makes no difference). Also the aperture size is always= =20 reported as 256Mb no matter what it actually is in the BIOS. I have disabled the glx & dri modules in xorg.conf (attached) and it seemed= to=20 work better for a bit but then crashed a little later. Currently I am stuck= =20 with VESA which is functional but a bit slow. I am using xorg 7.4 and I have a 7.1-STABLE from only a week ago, if anyone= =20 has some patches I'd be happy to test them :) dmesg & xorg.log are attached too. =2D-=20 Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C --Boundary-01=_3wfoJyQYFyreFOj Content-Type: text/plain; charset="utf-8"; name="dmesg.boot" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.boot" Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD is a registered trademark of The FreeBSD Foundation. =46reeBSD 7.1-STABLE #0: Wed Feb 18 19:23:15 CST 2009 root@obtuse-2ng.gsoft.com.au:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz (2800.12-MHz 686-class= CPU) Origin =3D "GenuineIntel" Id =3D 0x1067a Stepping =3D 10 Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=3D0x408e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM= ,SSE4.1,XSAVE> AMD Features=3D0x20100000<NX,LM> AMD Features2=3D0x1<LAHF> Cores per package: 2 real memory =3D 2110783488 (2013 MB) avail memory =3D 2052956160 (1957 MB) ACPI APIC Table: <INTEL DQ45CB > =46reeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <INTEL DQ45CB> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acp= i0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf220-0xf227 mem 0xd0000000-0xd03ff= fff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 agp0: <Intel Q45 SVGA controller> on vgapci0 agp0: detected 32764k stolen memory agp0: aperture size is 256M vgapci1: <VGA-compatible display> mem 0xd0400000-0xd04fffff at device 2.1 o= n pci0 pci0: <simple comms> at device 3.0 (no driver attached) atapci0: <Intel ATA controller> port 0xf210-0xf217,0xf200-0xf203,0xf1f0-0xf= 1f7,0xf1e0-0xf1e3,0xf1d0-0xf1df irq 18 at device 3.2 on pci0 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] pci0: <simple comms, UART> at device 3.3 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xf0e0-0xf0ff mem 0x= d0600000-0xd061ffff,0xd0624000-0xd0624fff irq 20 at device 25.0 on pci0 em0: Using MSI interrupt em0: [FILTER] em0: Ethernet address: 00:1c:c0:9d:2e:47 uhci0: <UHCI (generic) USB controller> port 0xf0c0-0xf0df irq 16 at device = 26.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xf0a0-0xf0bf irq 21 at device = 26.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0xf080-0xf09f irq 18 at device = 26.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0626400-0xd06267ff irq 18= at device 26.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: waiting for BIOS to give up control usb3: timed out waiting for BIOS usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 uhub3: 6 ports with 6 removable, self powered hdac0: <Intel (Unknown) High Definition Audio Controller> mem 0xd0620000-0x= d0623fff irq 22 at device 27.0 on pci0 hdac0: HDA Driver Revision: 20090131_0127 hdac0: [ITHREAD] uhci3: <UHCI (generic) USB controller> port 0xf060-0xf07f irq 23 at device = 29.0 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: <UHCI (generic) USB controller> on uhci3 usb4: USB revision 1.0 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: <UHCI (generic) USB controller> port 0xf040-0xf05f irq 19 at device = 29.1 on pci0 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 uhub5: 2 ports with 2 removable, self powered uhci5: <UHCI (generic) USB controller> port 0xf020-0xf03f irq 18 at device = 29.2 on pci0 uhci5: [GIANT-LOCKED] uhci5: [ITHREAD] usb6: <UHCI (generic) USB controller> on uhci5 usb6: USB revision 1.0 uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 uhub6: 2 ports with 2 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xd0626000-0xd06263ff irq 23= at device 29.7 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb7: waiting for BIOS to give up control usb7: timed out waiting for BIOS usb7: EHCI version 1.0 usb7: companion controllers, 2 ports each: usb4 usb5 usb6 usb7: <EHCI (generic) USB 2.0 controller> on ehci1 usb7: USB revision 2.0 uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7 uhub7: 6 ports with 6 removable, self powered umass0: <Generic USB2.0-CRW, class 0/0, rev 2.00/51.95, addr 2> on uhub7 pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib1 fwohci0: <Lucent FW322/323> mem 0xd0500000-0xd0500fff,0xd0501000-0xd05010ff= irq 22 at device 1.0 on pci1 fwohci0: [FILTER] fwohci0: OHCI version 1.0 (ROM=3D0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:90:27:00:02:41:76:6b fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:90:27:41:76:6b fwe0: Ethernet address: 02:90:27:41:76:6b fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:90:27:00:02:41:76:6b @ 0xfffe00000000, S400, ma= xrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x12e0000 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH10 SATA300 controller> port 0xf1b0-0xf1b7,0xf1a0-0xf1a3,= 0xf190-0xf197,0xf180-0xf183,0xf170-0xf17f,0xf160-0xf16f irq 19 at device 31= =2E2 on pci0 atapci1: [ITHREAD] ata4: <ATA channel 0> on atapci1 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci1 ata5: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci2: <Intel ICH10 SATA300 controller> port 0xf150-0xf157,0xf140-0xf143,= 0xf130-0xf137,0xf120-0xf123,0xf110-0xf11f,0xf100-0xf10f irq 19 at device 31= =2E5 on pci0 atapci2: [ITHREAD] ata6: <ATA channel 0> on atapci2 ata6: [ITHREAD] ata7: <ATA channel 1> on atapci2 ata7: [ITHREAD] acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp= i0 sio0: type 16550A sio0: [FILTER] cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6164a2206004a22 device_attach: est0 attach returned 6 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 6164a2206004a22 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xcc800-0xcd7ff pnpid ORM0000 on isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: [ITHREAD] ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ata1: [ITHREAD] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd0: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, ad= dr 2> on uhub0 kbd2 at ukbd0 uhid0: <Microsoft Comfort Curve Keyboard 2000, class 0/0, rev 2.00/1.73, ad= dr 2> on uhub0 ums0: <Microsoft Microsoft Basic Optical Mouse, class 0/0, rev 1.10/3.90, a= ddr 3> on uhub0 ums0: 3 buttons and Z dir. Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) firewire0: bus manager 0 (me) ad8: 238475MB <WDC WD2500AAKS-00B3A0 01.03A01> at ata4-master SATA300 GEOM_LABEL: Label for provider ad8s1 is ntfs/XPPro. GEOM_LABEL: Label for provider ad8s2a is ufs/slash. GEOM_LABEL: Label for provider ad8s2d is ufs/var. GEOM_LABEL: Label for provider ad8s2e is ufs/usr. acd0: DVDR <HL-DT-STDVD-RAM GH22NS30/1.01> at ata5-master SATA150 hdac0: HDA Codec #2: Analog Devices AD1882 hdac0: Adding 58 (nid=3D35): Max connection reached! max=3D32 pcm0: <HDA Analog Devices AD1882 PCM #0 Analog> at cad 2 nid 1 on hdac0 pcm1: <HDA Analog Devices AD1882 PCM #1 Analog> at cad 2 nid 1 on hdac0 SMP: AP CPU #1 Launched! da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI-0 device=20 da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da1 at umass-sim0 bus 0 target 0 lun 1 da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI-0 device=20 da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da2 at umass-sim0 bus 0 target 0 lun 2 da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device=20 da2: 40.000MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da3 at umass-sim0 bus 0 target 0 lun 3 da3: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI-0 device=20 da3: 40.000MB/s transfers da3: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ufs/slash WARNING: / was not properly dismounted WARNING: /usr was not properly dismounted /usr: mount pending error: blocks 20 files 3 WARNING: /var was not properly dismounted /var: mount pending error: blocks 48 files 0 WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted --Boundary-01=_3wfoJyQYFyreFOj Content-Type: text/plain; charset="utf-8"; name="xorg.conf" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="xorg.conf" Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "ServerFlags"=20 Option "AllowEmptyInput" "off"=20 Option "AutoAddDevices" "off"=20 EndSection=20 Section "Files" ModulePath "/usr/local/lib/xorg/modules" FontPath "/usr/local/lib/X11/fonts/misc/" FontPath "/usr/local/lib/X11/fonts/TTF/" FontPath "/usr/local/lib/X11/fonts/OTF" FontPath "/usr/local/lib/X11/fonts/Type1/" FontPath "/usr/local/lib/X11/fonts/100dpi/" FontPath "/usr/local/lib/X11/fonts/75dpi/" EndSection Section "Module" Load "extmod" Load "record" Load "dbe" #Load "glx" Disable "glx" Load "xtrap" #Load "dri" Disable "dri" Load "freetype" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/sysmouse" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "ColorKey" # <i> #Option "CacheLines" # <i> #Option "Dac6Bit" # [<bool>] #Option "DRI" # [<bool>] #Option "NoDDC" # [<bool>] #Option "ShowCache" # [<bool>] #Option "XvMCSurfaces" # <i> #Option "PageFlip" # [<bool>] Identifier "Card0" #Driver "intel" Driver "vesa" VendorName "Intel Corporation" BoardName "4 Series Chipset Integrated Graphics Controller" BusID "PCI:0:2:0" Option "DRI" "False" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection --Boundary-01=_3wfoJyQYFyreFOj-- --nextPart2141986.bPZGNLoyN5 Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) iD8DBQBJofw35ZPcIHs/zowRAlaBAJ429ufSuVBQd8FFLnqBLTVKpf2uGgCgowJb jkV+WfzGdYwo96vmhADo2yA= =WlyU -----END PGP SIGNATURE----- --nextPart2141986.bPZGNLoyN5--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200902231200.38164.doconnor>