Date: Mon, 25 Oct 1999 13:51:48 +0600 (ESS) From: Ilia Chipitsine <ilia@cgilh.chel.su> To: Fredrik Carlen <fredrik.carlen@telia.com> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Musician with Sound problems Message-ID: <Pine.BSF.4.10.9910251350270.283-100000@localhost.cgu.chel.su> In-Reply-To: <99102423075800.00533@orcslayer.leonis.net>
next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE----- On Sun, 24 Oct 1999, Fredrik Carlen wrote: > It seems like a whole lotta people have troubles getting their soundcards to > work on this mailing list, and to be frank, so have I. I'm not expecting > someone to solve my problems, just gimme something to work with. I _have_ read > all of the sound related stuff in "The complete FreeBSD", so I think I need > something else... > > The sound related stuff in dmesg is : > "sb0 at 0x220 irq 5 drq 1 on isa you may want to use "pcm0", it's better. > Hmm... Could this be an ESS688 > based card (rev 11) > > NOTE! SB Pro support required with your soundcard! > snd0: <SoundBlaster Pro 3.1> " > > My kernel config file has this stuff in it, which i think should be appropriate: > "controller snd0 > device sb0 at isa? port 0x220 irq 5 drq 1" > > When I recently played a system sound, I got a small beep (not from the system > speaker, but really from the speakers attached to the sound board) and a bunch > of errors saying: > "Sound: DMA (output) timed out - IRQ/DRQ config error? > Sound: DMA (output) timed out - IRQ/DRQ config error? > Sound: DMA (output) timed out - IRQ/DRQ config error? > Sound: DMA (output) timed out - IRQ/DRQ config error? > Sound: DMA (output) timed out - IRQ/DRQ config error? > Sound: DMA (output) timed out - IRQ/DRQ config error? > Sound: DMA (output) timed out - IRQ/DRQ config error? > Sound: DMA (output) timed out - IRQ/DRQ config error? > [...I think you've gotten _that_ by now!]" > > The following error used to pop up when I start X, but this no longer > happens(!): "maudio: cannot open audio device" > (Like I said, I don't get this now...for some reason...) > > I have tried, in /dev/ : > "# ./MAKEDEV snd0" > ...but when I then proceed to: > "# ls -l | grep snd0" , > snd0 isn't there! > How can this be? $ ls /dev/dsp* > > When I recently played a system sound, I got a small beep and abunch of errors > saying: > "Sound: DMA (output) timed out - IRQ/DRQ config error? > Sound: DMA (output) timed out - IRQ/DRQ config error? > Sound: DMA (output) timed out - IRQ/DRQ config error? > Sound: DMA (output) timed out - IRQ/DRQ config error? > Sound: DMA (output) timed out - IRQ/DRQ config error? > Sound: DMA (output) timed out - IRQ/DRQ config error? > Sound: DMA (output) timed out - IRQ/DRQ config error? > Sound: DMA (output) timed out - IRQ/DRQ config error? > [...and so on, and so on...]" > > The _whole_ of > "$ startx >Xserver_output 2>&1" > comes here: > > "XFree86 Version 3.3.3.1 / X Window System > (protocol Version 11, revision 0, vendor release 6300) > Release Date: December 29 1998 > If the server is older than 6-12 months, or if your card is newer > than the above date, look for a newer version before reporting > problems. (see http://www.XFree86.Org/FAQ) > Operating System: FreeBSD 3.0-CURRENT i386 [ELF] > Configured drivers: > S3: accelerated server for S3 graphics adaptors (Patchlevel 0) > newmmio, mmio_928, s3_generic > Using syscons driver with X support (version 2.0) > (using VT number 4) > > XF86Config: /etc/XF86Config > (**) stands for supplied, (--) stands for probed/default values > (**) XKB: rules: "xfree86" > (**) XKB: model: "pc101" > (**) XKB: layout: "se" > (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200 > (**) Mouse: buttons: 3 > (**) S3: Graphics device ID: "Primary Card" > (**) S3: Monitor ID: "Primary Monitor" > Warning: The directory "/usr/X11R6/lib/X11/fonts/local" does not exist. > Entry deleted from font path. > (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi" > (--) S3: PCI: Trio32/64 rev 54, Linear FB @ 0xe0000000 > (--) S3: chipset: Trio64V+ rev. 54 > (--) S3: chipset driver: newmmio > (--) S3: card type: PCI > (**) S3: videoram: 1024k > (--) S3: Ramdac type: s3_trio64 > (--) S3: Ramdac speed: 135 MHz > (--) S3: Using Trio32/64 programmable clock (MCLK 52.500 MHz) > (--) S3: Maximum allowed dot-clock: 95.000 MHz > (**) S3: Mode "800x600": mode clock = 50.000 > (**) S3: Using 16 bpp. Color weight: 565 > (--) S3: Virtual resolution set to 800x600 > (--) S3: Local bus LAW is 0xE0000000 > (--) S3: Using a banksize of 1024k, line width of 800 > (--) S3: Using a single 54x54 area at (746,601) for expanding pixmaps > (--) S3: Using 16 planes of 746x54 at (0,601) aligned 8 as font cache > KCharset: Wrong charset! > > maudio OSS Error: 5 > maudio OSS Error: 5 > maudio OSS Error: 5 > KCharset: Wrong charset!" > > > I am really grateful for all the help I can get, and I am going start with > recompiling with another set of IRQ/DRQ's > /Fredrik ("What am I - a musician or a computer software engineer?") Carlen > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -----BEGIN PGP SIGNATURE----- Version: 2.6.3ia Charset: noconv iQB1AwUBOBQMF+RxlWKN2EXhAQGxPgL7BYR3eovFdvb3ksuOKsdcn78P3U2aQcWc bRk5u0T6FXdIsK6Xk1Cre3B3zw32o2NVlWsNIDMJKWUeGVvpm4BBGNatz9KFBh/g HVgkcGAodoKjwUF3amQ/TaNms9Lh584D =NOL5 -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9910251350270.283-100000>