Date: Mon, 30 Aug 1999 14:44:42 +0200 (CEST) From: Mauro Allegrini <mauro@binomia.com> To: freebsd-questions@freebsd.org Subject: PnP sound card Message-ID: <Pine.BSF.4.05.9908301443130.927-100000@silvia.binomia.com>
next in thread | raw e-mail | index | archive | help
I have a ALS120 chipset ISA sound card and FBSD 2.2-STABLE.
I am using Luigi's sound drivers and my PNP card seems to be
recognised. The problem is: I hear no sound at all! Of course, I've
checked my mixer and the volume is ok.In fact, I hear only the bump from the
speakers,so the card anyhow works.
Here it is my CONFIG lines:
controller pnp0 # this is required for PnP support
device pcm0 at isa ? port? tty irq 5 drq 1 flags 0x13 vector pcmintr
int 5 DMA #0 is 1 and DMA #1 is 3
Here is pnpinfo output:
---
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID ALS0120 (0x20019305), Serial Number 0xffffffff
PnP Version 1.0, Vendor Version 0
Device Description: PnP Sound Chip
Logical Device ID: @@@2001 0x01200000 #0
Device supports I/O Range Check
TAG Start DF
Good Configuration
I/O Range 0x220 .. 0x220, alignment 0x10, len 0x10
[16-bit addr]
IRQ: 5 - only one type (true/edge)
DMA: channel(s) 1
8-bit, not a bus master, count by byte, , Type F
DMA: channel(s) 0 3
8-bit, not a bus master, count by byte, , Type F
TAG Start DF
Acceptable Configuration
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
IRQ: 5 7 9 10 11 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type F
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type F
TAG Start DF
Sub-optimal Configuration
I/O Range 0x100 .. 0x280, alignment 0x10, len 0x10
[16-bit addr]
IRQ: 5 7 9 10 11 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Type F
TAG End DF
Logical Device ID: @H@2001 0x01200001 #1
Device supports I/O Range Check
TAG Start DF
Good Configuration
I/O Range 0x388 .. 0x388, alignment 0x8, len 0x8
[16-bit addr]
TAG Start DF
Acceptable Configuration
I/O Range 0x400 .. 0x438, alignment 0x8, len 0x8
[16-bit addr]
TAG End DF
Logical Device ID: @P@2001 0x01200002 #2
Device supports I/O Range Check
TAG Start DF
Good Configuration
I/O Range 0x200 .. 0x200, alignment 0x8, len 0x8
[16-bit addr]
TAG Start DF
Acceptable Configuration
I/O Range 0x440 .. 0x478, alignment 0x8, len 0x8
[16-bit addr]
TAG End DF
Logical Device ID: @X@2001 0x01200003 #3
Device supports I/O Range Check
TAG Start DF
Good Configuration
I/O Range 0x330 .. 0x330, alignment 0x2, len 0x2
[16-bit addr]
IRQ: 9 - only one type (true/edge)
TAG Start DF
Acceptable Configuration
I/O Range 0x300 .. 0x390, alignment 0x10, len 0x2
[16-bit addr]
IRQ: 5 7 9 10 11 - only one type (true/edge)
TAG End DF
End Tag
Successfully got 38 resources, 4 logical fdevs
-- card select # 0x0001
CSN ALS0120 (0x20019305), Serial Number 0xffffffff
Logical device #0
IO: 0x0220 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 5 0
DMA 1 3
IO range check 0x00 activate 0x01
Logical device #1
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x00
Logical device #2
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x00
Logical device #3
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x00
----
And here it is my dmesg output:
ed1 <NE2000 PCI Ethernet (RealTek 8029)> rev 0 int a irq 10 on pci0:12:0
ed1: address 00:00:e8:55:f6:60, type NE2000 (16 bit)
Probing for devices on PCI bus 1:
vga0 <VGA-compatible display device> rev 1 int a irq 11 on pci1:0:0
Probing for PnP devices:
CSN 1 Vendor ID: ALS0120 [0x20019305] Serial 0xffffffff
PnP: override config for CSN 1 LDN 0 vend_id 0x20019305
Any help will be much appreciated.
TIA,
Mauro
--
Mauro Allegrini PGP key available on request
mauro@binomia.com
FreeBSD: The power to serve
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9908301443130.927-100000>