From owner-freebsd-hardware@FreeBSD.ORG Thu Jun 24 14:02:50 2004 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 9FA4816A4CE for ; Thu, 24 Jun 2004 14:02:50 +0000 (GMT) Received: from fulcrum.mig-29.net (dsl-200-78-45-190.prod-infinitum.com.mx [200.78.45.190]) by mx1.FreeBSD.org (Postfix) with ESMTP id DF9A143D1F for ; Thu, 24 Jun 2004 14:02:47 +0000 (GMT) (envelope-from mig@mig-29.net) Received: by fulcrum.mig-29.net (Postfix, from userid 1000) id 6ED3633C48; Thu, 24 Jun 2004 09:01:52 -0500 (CDT) Date: Thu, 24 Jun 2004 09:01:52 -0500 From: Manuel Rabade Garcia To: hardware@freebsd.org Message-ID: <20040624140152.GA894@mig-29.net> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="6c2NcOVqGQ03X4Wi" Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.5.6i Subject: Sony DSC P73 and umass failed (CBI reset failed, STALLED) X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 24 Jun 2004 14:02:50 -0000 --6c2NcOVqGQ03X4Wi Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit Hi everyone, i buy a Sony DSC P73 Digital Camera wich supports USB Normal mode (as a 'standard' storage device), PTP mode and Picture Bridge (for other Sony devices i think). I use FreeBSD 5.2.1 (see dmesg above) and when i connect it the umass fails to detect the storage device and kernel says: umass0: Sony Sony DSC, rev 2.00/5.00, addr 2 umass0: CBI reset failed, STALLED umass0: CBI reset failed, STALLED umass0: CBI reset failed, STALLED umass0: CBI reset failed, STALLED umass0: CBI reset failed, STALLED The output of 'usbdevs -v' is: mig@fulcrum:~$ usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 addr 2: low speed, power 100 mA, config 1, Microsoft Trackball Explorer®(0x0024), Microsoft(0x045e), rev 1.21 port 2 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 addr 2: full speed, self powered, config 1, Sony DSC(0x0010), Sony(0x054c), rev 5.00 port 2 powered I wan to send a pr but i don't know what other information could be useful (the dmesg and usbdevs i think are not enough), i am very interested in coperating to get it working :). Thanks to everyone and keep up the good work :) -- Manuel Rabade Garcia WWW - http://mig-29.net GPG - 1024D/AA3325C0 2002-09-30 Fingerprint - D2E5 76E1 CE2D 8783 545D 1F41 399B 5765 AA33 25C0 --6c2NcOVqGQ03X4Wi Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: attachment; filename="dmesg.txt" Content-Transfer-Encoding: 8bit Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE-p5 #0: Tue Apr 20 13:36:34 CDT 2004 root@:/usr/obj/usr/src/sys/FULCRUM Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b4e000. Preloaded elf module "/boot/modules/linux.ko" at 0xc0b4e1cc. Preloaded acpi_dsdt "/boot/acpi_dsdt.aml" at 0xc0b4e278. Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0b4e2c0. Preloaded elf module "/boot/modules/acpi.ko" at 0xc0b4e36c. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz (1993.54-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff real memory = 536748032 (511 MB) avail memory = 511143936 (487 MB) netsmb_dev: loaded Pentium Pro MTRR support enabled VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc0877782 (1000022) VESA: NVidia ACPI: DSDT was overridden. ACPI-0375: *** Info: Table [DSDT] replaced by host OS npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard pcibios: BIOS version 2.10 Using $PIR table, 11 entries at 0xc00fbb90 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: port 0x530-0x537 on acpi0 acpi_tz0: port 0x530-0x537 on acpi0 acpi_acad0: on acpi0 acpi_cmbat0: on acpi0 acpi_cmbat1: on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib0: slot 29 INTA is routed to irq 11 pcib0: slot 29 INTC is routed to irq 11 pcib0: slot 31 INTB is routed to irq 11 pcib0: slot 31 INTB is routed to irq 11 agp0: mem 0xe8000000-0xebffffff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pcib1: slot 0 INTA is routed to irq 11 nvidia0: mem 0xdff80000-0xdfffffff,0xe0000000-0xe7ffffff,0xfc000000-0xfcffffff irq 11 at device 0.0 on pci1 uhci0: port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Microsoft Microsoft Trackball Explorer®, rev 1.10/1.21, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. uhci1: port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pcib2: at device 30.0 on pci0 pci2: on pcib2 pcib2: slot 0 INTA is routed to irq 11 pcib2: slot 1 INTA is routed to irq 11 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0xf8fffc7f irq 11 at device 0.0 on pci2 xl0: Ethernet address: 00:08:74:e5:9e:ba miibus0: on xl0 ukphy0: on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto cbb0: at device 1.0 on pci2 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: slot 1 INTA is routed to irq 11 cbb0: [MPSAFE] cbb1: at device 1.1 on pci2 cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: slot 1 INTA is routed to irq 11 cbb1: [MPSAFE] fwohci0: mem 0xf8ff8000-0xf8ffbfff,0xf8fff000-0xf8fff7ff irq 11 at device 1.2 on pci2 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 32:4f:c0:00:08:40:d8:41 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 sbp0: on firewire0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 32:4f:c0:40:d8:41 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pcm0: port 0xdc80-0xdcbf,0xd800-0xd8ff irq 11 at device 31.5 on pci0 pcm0: pci0: at device 31.6 (no driver attached) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 speaker0 port 0x67,0x65,0x63,0x61 on acpi0 fdc0: port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x280-0x287,0x2f8-0x2ff irq 3 drq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 orm0: