Date: Wed, 22 Nov 2000 14:59:40 +0000 (GMT) From: justin <oneiros@miseria.org> To: scsi@freebsd.org Subject: Root mount failed; question Message-ID: <Pine.BSF.4.21.0011221444080.18317-100000@ichor.miseria.org>
next in thread | raw e-mail | index | archive | help
Since 4.1.1, i have been having a problem with FreeBSD being unable to
mount in the final stages of booting. i get:
Root mount failed: 22
when it gets to the UFS section of mounting the filesystems. originally i
thought that it was due to 4.1.1's non-official support of the adaptec
29160N scsi card. now that 4.2 has come out and the same thing has
happened, i'm wondering if it is my setup?
the disk is "dangerously dedicated", and the hardware and filesystems are
detailed below.
my question is this: has anyone else seen this happen? is there something
in the scsi setup itself (hardware, etc) that i should look at?
many thanks,
justin
Filesystem Size Used Avail Capacity Mounted on
/dev/da0s1a 992M 37M 876M 4% /
/dev/da0s1e 15G 857M 13G 6% /usr
/dev/ad0s1e 25G 807M 22G 3% /usr/home
/dev/da0s1f 485M 1.9M 444M 0% /var
procfs 4.0K 4.0K 0B 100% /proc
FreeBSD 4.1-STABLE #0: Thu Nov 2 13:45:07 GMT 2000
root@baltazar.ef.uni-lj.si:/usr/src/sys/compile/ELEND
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 801820954 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (801.82-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 536858624 (524276K bytes)
avail memory = 520257536 (508064K bytes)
Preloaded elf kernel "kernel.old" at 0xc0286000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device 4.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 4.2 irq 10
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at
device 4.3 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd000-0xd01f mem
0xe1000000-0xe10fffff,0xe3800000-0xe3800fff irq 11 at device 7.0 on pci0
fxp0: Ethernet address 00:e0:18:99:03:89
pci0: <ATI Mach64-GP graphics accelerator> at 9.0 irq 10
ahc0: <Adaptec 29160N Ultra160 SCSI adapter> port 0xb400-0xb4ff mem
0xe0000000-0xe0000fff irq 11 at device 10.0 on pci0
ahc0: aic7892 Wide Channel A, SCSI Id=7, 16/255 SCBs
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert disabled, rule-based forwarding
disabled, default to accept, logging limited to 100 packets/entry by
default
ad0: 26105MB <WDC WD273BA> [53040/16/63] at ata0-master using UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-6702B> at ata1-master using PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 6 lun 0
da0: <IBM DPSS-318350N S80D> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0011221444080.18317-100000>