Date: Thu, 14 Feb 2002 21:08:34 -0500 From: "theVanguardian" <theVanguardian@yahoo.com> To: <freebsd-questions@FreeBSD.ORG> Subject: Suspend Problems Message-ID: <000201c1b5c5$adbe5000$97672c42@anant>
next in thread | raw e-mail | index | archive | help
Hi,
I have a Dell Latitude C800 and whenever I suspend, I seem to
get a bunch of error messages after resuming. The laptop actually
suspends, its resuming that's the problem. The main problem I'm having
is my mouse acts erratically and my USB port stops working. Here's my
dmesg, with the section marked where the errors begin after I have
resumed:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.5-RELEASE #0: Mon Jan 28 14:31:56 GMT 2002
murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (997.82-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268353536 (262064K bytes)
avail memory = 256307200 (250300K bytes)
Preloaded elf kernel "kernel" at 0xc04b5000.
Preloaded elf module "snd_maestro3.ko" at 0xc04b509c.
Preloaded elf module "snd_pcm.ko" at 0xc04b5140.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00fbc20
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82801BA/BAM (ICH2) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4d46 graphics accelerator> at 0.0 irq 11
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on
pci0
pci2: <PCI bus> on pcib2
pcm0: <ESS Technology Maestro3> port 0xec00-0xecff mem
0xf8ffe000-0xf8ffffff irq 5 at device 3.0 on pci2
xl0: <3Com 3c556 Fast Etherlink XL> port 0xe800-0xe8ff mem
0xf8ffd800-0xf8ffd87f,0xf8ffdc00-0xf8ffdc7f irq 11 at device 6.0 on pci2
xl0: Ethernet address: 00:04:76:42:65:33
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <unknown card> (vendor=0x10b7, dev=0x1007) at 6.1 irq 11
pcic0: <TI PCI-4451 PCI-CardBus Bridge> irq 11 at device 15.0 on pci2
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial
isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-4451 PCI-CardBus Bridge> irq 11 at device 15.1 on pci2
pcic1: PCI Memory allocated: 0x44001000
pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial
isa irq]
pccard1: <PC Card bus (classic)> on pcic1
pci2: <unknown card> (vendor=0x104c, dev=0x8027) at 15.2 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=244c)> at device 31.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xbfa0-0xbfaf at device
31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port
0xdce0-0xdcff irq 11 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
orm0: <Option ROMs> at iomem
0xc0000-0xcffff,0xd0000-0xd07ff,0xd0800-0xd0fff,0xd1000-0xd17ff,0xd1800-
0xd1fff,0xd2000-0xd27ff,0xd2800-0xd2fff,0xd3000-0xd37ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 19077MB <IBM-DJSA-220> [38760/16/63] at ata0-master UDMA66
acd0: DVD-ROM <LG DVD-ROM DRN-8080B> at ata0-slave using PIO4
Mounting root from ufs:/dev/ad0s2a
******** ERRORS START HERE AFTER RESUMING FROM STANDBY ************
usb0: host controller process error
usb0: host controller halted
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
psmintr: out of sync (0000 != 0008).
uhub0: device problem, disabling port 1
xl0: watchdog timeout
Please CC me as I'm not subscribed to the list. Thanks.
-- Anant
\**********************/
* *
* O *
* \_____/ *
* _____ *
* / \ *
* | *
* / __ *
* __|_/ \__/ *
* | *
* \ *
* __ | *
* / \_____/ *
* | *
* \_ *
* *
/**********************\
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000201c1b5c5$adbe5000$97672c42>