From owner-freebsd-current@FreeBSD.ORG Sun Oct 17 17:45:30 2004 Return-Path: Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 64A2E16A4D6 for ; Sun, 17 Oct 2004 17:45:24 +0000 (GMT) Received: from av4-1-sn3.vrr.skanova.net (av4-1-sn3.vrr.skanova.net [81.228.9.111]) by mx1.FreeBSD.org (Postfix) with ESMTP id 2C2E943D2F for ; Sun, 17 Oct 2004 17:45:24 +0000 (GMT) (envelope-from daniel_k_eriksson@telia.com) Received: by av4-1-sn3.vrr.skanova.net (Postfix, from userid 502) id 8A34837EEB; Sun, 17 Oct 2004 19:45:23 +0200 (CEST) Received: from smtp1-2-sn3.vrr.skanova.net (smtp1-2-sn3.vrr.skanova.net [81.228.9.178]) by av4-1-sn3.vrr.skanova.net (Postfix) with ESMTP id 7A56137E48 for ; Sun, 17 Oct 2004 19:45:23 +0200 (CEST) Received: from sentinel (h130n1fls11o822.telia.com [213.64.66.130]) by smtp1-2-sn3.vrr.skanova.net (Postfix) with ESMTP id 3FDA138006 for ; Sun, 17 Oct 2004 19:45:23 +0200 (CEST) From: "Daniel Eriksson" To: Date: Sun, 17 Oct 2004 19:45:14 +0200 Organization: Home Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook, Build 11.0.6353 Thread-Index: AcS0amOT76m5k6msS6idso6xEWR3cAABPbUg X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 In-Reply-To: Subject: RE: Current crash on today's kernel X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 17 Oct 2004 17:45:30 -0000 Sorry about the lack of details in the previous message! The machine is using both ataraid and gvinum. (But cannot use geom_stripe since it doesn't want to play nice with ataraid.) At the time of the crash I was pulling data off of it using Samba, and there was also at least two fast uploads to filesystem using sftp. When using ACPI there seems to be some sort of interrupt problem, possibly with the SATA controller. It results in an unusually high interrupt load even when the machine is mostly idle. I will try with ACPI again after I switch some cards around. Below is the dmesg, mptable and vmstat -i output. /Daniel Eriksson KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #0: Sun Oct 17 15:14:55 CEST 2004 daniel@xxx.xxx.xxx:/usr/obj/usr/src/sys/XXX Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) MP 2600+ (2000.08-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0 Features=0x383fbff AMD Features=0xc0480000 real memory = 1073217536 (1023 MB) avail memory = 1040691200 (992 MB) MPTable: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 1 cpu1 (AP): APIC ID: 0 ioapic0: Assuming intbase of 0 ioapic0 irqs 0-23 on motherboard npx0: [FAST] npx0: on motherboard npx0: INT 16 interface pcib0: pcibus 0 on motherboard pci0: on pcib0 agp0: port 0x1490-0x1493 mem 0xea100000-0xea100fff,0xec000000-0xefffffff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 5.0 (no driver attached) isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: at device 7.3 (no driver attached) em0: port 0x1400-0x143f mem 0xe8000000-0xe803ffff,0xe8080000-0xe809ffff irq 16 at device 8.0 on pci0 em0: Ethernet address: 00:04:23:ac:20:8a em0: Speed:N/A Duplex:N/A em1: port 0x1440-0x147f mem 0xe8040000-0xe807ffff,0xe80a0000-0xe80bffff irq 17 at device 8.1 on pci0 em1: Ethernet address: 00:04:23:ac:20:8b em1: Speed:N/A Duplex:N/A ahc0: port 0x1000-0x10ff mem 0xe80c0000-0xe80c0fff irq 17 at device 9.0 on pci0 ahc0: [GIANT-LOCKED] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs pcib2: at device 16.0 on pci0 pci2: on pcib2 atapci1: port 0x3000-0x307f,0x30c0-0x30cf,0x3080-0x30bf mem 0xea000000-0xea01ffff,0xea021000-0xea021fff irq 16 at device 4.0 on pci2 atapci1: failed: rid 0x20 is memory, requested 4 ata2: channel #0 on atapci1 ata3: channel #1 on atapci1 ata4: channel #2 on atapci1 ata5: channel #3 on atapci1 atapci2: port 0x2000-0x20ff,0x30d0-0x30d3,0x30d8-0x30df,0x30d4-0x30d7,0x30e0-0x30e7 irq 17 at device 5.0 on pci2 ata6: channel #0 on atapci2 ata7: channel #1 on atapci2 atapci3: port 0x2400-0x24ff,0x30e8-0x30eb,0x30f0-0x30f7,0x30ec-0x30ef,0x30f8-0x30ff irq 17 at device 5.1 on pci2 ata8: channel #0 on atapci3 ata9: channel #1 on atapci3 atapci4: port 0x2800-0x28ff,0x3400-0x3403,0x3408-0x340f,0x3404-0x3407,0x3410-0x3417 irq 19 at device 7.0 on pci2 ata10: channel #0 on atapci4 ata11: channel #1 on atapci4 atapci5: port 0x2c00-0x2cff,0x3418-0x341b,0x3420-0x3427,0x341c-0x341f,0x3428-0x342f irq 19 at device 7.1 on pci2 ata12: channel #0 on atapci5 ata13: channel #1 on atapci5 cpu0 on motherboard cpu1 on motherboard orm0: at iomem 0xe0000-0xe3fff,0xc0000-0xcafff on isa0 pmtimer0 on isa0 atkbdc0: at port 0x64,0x60 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: can't assign resources (port) unknown: can't assign resources (memory) unknown: can't assign resources (port) unknown: can't assign resources (port) Timecounters tick every 1.000 msec ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to accept, logging unlimited ad0: 117800MB [239340/16/63] at ata0-master UDMA100 ad1: 117800MB [239340/16/63] at ata0-slave UDMA100 ad2: 117800MB [239340/16/63] at ata1-master UDMA100 ad3: 117800MB [239340/16/63] at ata1-slave UDMA100 em0: Link is up 1000 Mbps Full Duplex ad4: 239372MB [486344/16/63] at ata2-master SATA150 ad6: 238475MB [484521/16/63] at ata3-master SATA150 ad8: 239372MB [486344/16/63] at ata4-master SATA150 em1: Link is up 100 Mbps Full Duplex ad12: 238475MB [484521/16/63] at ata6-master UDMA100 ad13: 238475MB [484521/16/63] at ata6-slave UDMA100 ad14: 239372MB [486344/16/63] at ata7-master UDMA133 ad15: 239372MB [486344/16/63] at ata7-slave UDMA133 ad16: 194481MB [395136/16/63] at ata8-master UDMA133 ad17: 194481MB [395136/16/63] at ata8-slave UDMA133 ad18: 194481MB [395136/16/63] at ata9-master UDMA133 ad19: 239372MB [486344/16/63] at ata9-slave UDMA133 ad20: 114473MB [232581/16/63] at ata10-master UDMA100 ad21: 114473MB [232581/16/63] at ata10-slave UDMA100 ad22: 117246MB [238216/16/63] at ata11-master UDMA133 ad23: 117246MB [238216/16/63] at ata11-slave UDMA133 ad24: 114473MB [232581/16/63] at ata12-master UDMA100 ar0: 476950MB [60802/255/63] status: READY subdisks: disk0 READY on ad12 at ata6-master disk1 READY on ad13 at ata6-slave ar1: 478744MB [61031/255/63] status: READY subdisks: disk0 READY on ad14 at ata7-master disk1 READY on ad15 at ata7-slave ar2: 388962MB [49585/255/63] status: READY subdisks: disk0 READY on ad17 at ata8-slave disk1 READY on ad16 at ata8-master ar3: 228946MB [29186/255/63] status: READY subdisks: disk0 READY on ad23 at ata11-slave disk1 READY on ad24 at ata12-master Waiting 5 seconds for SCSI devices to settle sa0 at ahc0 bus 0 target 5 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 15) da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 8759MB (17938986 512 byte sectors: 255H 63S/T 1116C) da1 at ahc0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-3 device da1: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled da1: 8759MB (17938986 512 byte sectors: 255H 63S/T 1116C) da2 at ahc0 bus 0 target 10 lun 0 da2: Fixed Direct Access SCSI-3 device da2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da2: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) da3 at ahc0 bus 0 target 11 lun 0 da3: Fixed Direct Access SCSI-3 device da3: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da3: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) da4 at ahc0 bus 0 target 12 lun 0 da4: Fixed Direct Access SCSI-3 device da4: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da4: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) da5 at ahc0 bus 0 target 13 lun 0 da5: Fixed Direct Access SCSI-3 device da5: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da5: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/da0s1a Pre-seeding PRNG: kickstart. Loading configuration files. Entropy harvesting: point_to_point kickstart. kernel dumps on /dev/da0s1b swapon: adding /dev/da0s1b as swap device swapon: adding /dev/da1s1b as swap device Starting file system checks: /dev/da0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/da0s1a: clean, 197205 free (1333 frags, 24484 blocks, 0.5% fragmentation) /dev/da1s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/da1s1e: clean, 913768 free (32 frags, 114217 blocks, 0.0% fragmentation) /dev/da0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/da0s1e: clean, 253813 free (21 frags, 31724 blocks, 0.0% fragmentation) /dev/da1s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/da1s1d: clean, 198959 free (2087 frags, 24609 blocks, 0.4% fragmentation) /dev/da0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/da0s1f: clean, 1026218 free (20410 frags, 125726 blocks, 0.8% fragmentation) /dev/da0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/da0s1d: clean, 182953 free (393 frags, 22820 blocks, 0.2% fragmentation) net.inet.tcp.sendspace: 32768 -> 262144 net.inet.tcp.recvspace: 65536 -> 262144 kern.ipc.maxsockbuf: 262144 -> 2097152 kern.maxfiles: 12328 -> 32768 kern.maxfilesperproc: 11095 -> 16384 kern.ipc.somaxconn: 128 -> 1024 net.inet.ip.intr_queue_maxlen: 50 -> 500 net.isr.enable: 0 -> 1 Setting hostname: xxx.xx.xxx em0: flags=8843 mtu 1500 options=1b inet xxx.xxx.xxx.xxx netmask 0xffffff00 broadcast xxx.xxx.xxx.255 ether 00:04:23:ac:20:8a media: Ethernet autoselect status: no carrier em1: flags=8843 mtu 1500 options=1b inet 192.168.xxx.1 netmask 0xffffff00 broadcast 192.168.xxx.255 ether 00:04:23:ac:20:8b media: Ethernet autoselect status: no carrier lo0: flags=8049 mtu 16384 inet 127.0.0.1 netmask 0xff000000 ============================================================================ === MPTable, version 2.0.15 ---------------------------------------------------------------------------- --- MP Floating Pointer Structure: location: BIOS physical address: 0x000f7170 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0x43 mode: Virtual Wire ---------------------------------------------------------------------------- --- MP Config Table Header: physical address: 0x0009e470 signature: 'PCMP' base table length: 316 version: 1.4 checksum: 0x8c OEM ID: 'TYAN ' Product ID: 'PAULANER ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 31 local APIC address: 0xfee00000 extended table length: 324 extended table checksum: 18 ---------------------------------------------------------------------------- --- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 1 0x10 BSP, usable 6 10 0 0x383fbff 0 0x10 AP, usable 6 10 0 0x383fbff -- Bus: Bus ID Type 0 PCI 1 PCI 2 PCI 3 ISA -- I/O APICs: APIC ID Version State Address 2 0x11 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 3 0 2 0 INT active-hi edge 3 1 2 1 INT active-hi edge 3 0 2 2 INT active-lo level 0 8:B 2 17 INT active-hi edge 3 4 2 4 INT active-lo level 0 8:A 2 16 INT active-hi edge 3 6 2 6 INT active-hi edge 3 7 2 7 INT active-hi edge 3 8 2 8 INT active-hi edge 3 9 2 9 INT active-lo level 2 7:A 2 19 INT active-lo level 1 5:A 2 18 INT active-hi edge 3 12 2 12 INT active-hi edge 3 13 2 13 INT active-hi edge 3 14 2 14 INT active-hi edge 3 15 2 15 INT active-lo level 0 9:A 2 17 INT active-lo level 2 0:C 2 19 INT active-lo level 2 4:A 2 16 INT active-lo level 2 5:A 2 17 INT active-lo level 2 5:A 2 17 INT active-lo level 2 7:A 2 19 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 3 0 255 0 NMI active-hi edge 1 0:A 255 1 ---------------------------------------------------------------------------- --- MP Config Extended Table Entries: -- System Address Space bus ID: 0 address type: I/O address address base: 0x0 address range: 0x10000 -- System Address Space bus ID: 0 address type: memory address address base: 0x40000000 address range: 0xaa100000 -- System Address Space bus ID: 0 address type: prefetch address address base: 0xea100000 address range: 0xdf00000 -- System Address Space bus ID: 0 address type: memory address address base: 0xf8000000 address range: 0x6e00000 -- System Address Space bus ID: 0 address type: memory address address base: 0xfee01000 address range: 0x11ff000 -- System Address Space bus ID: 0 address type: memory address address base: 0xa0000 address range: 0x24000 -- System Address Space bus ID: 0 address type: memory address address base: 0xc8000 address range: 0x2000 -- System Address Space bus ID: 0 address type: memory address address base: 0xcc000 address range: 0x2000 -- System Address Space bus ID: 0 address type: memory address address base: 0xd0000 address range: 0x1000 -- System Address Space bus ID: 0 address type: memory address address base: 0xd2000 address range: 0x1000 -- System Address Space bus ID: 0 address type: memory address address base: 0xd4000 address range: 0x1000 -- System Address Space bus ID: 0 address type: memory address address base: 0xd6000 address range: 0x1000 -- System Address Space bus ID: 0 address type: memory address address base: 0xd8000 address range: 0x2000 -- System Address Space bus ID: 0 address type: memory address address base: 0xe0000 address range: 0x12000 -- System Address Space bus ID: 0 address type: memory address address base: 0xf8000 address range: 0x4000 -- Bus Heirarchy bus ID: 3 bus info: 0x01 parent bus ID: 0 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000000 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000001 ============================================================================ === # vmstat -i interrupt total rate irq1: atkbd0 2 0 irq0: clk 5142796 995 irq4: sio0 1056 0 irq6: fdc0 10 0 irq8: rtc 658343 127 irq13: npx0 1 0 irq14: ata0 205255 39 irq15: ata1 205046 39 irq16: em0 atapci1 11635073 2251 irq17: em1 ahc0++ 6549430 1267 irq19: atapci4+ 442467 85 Total 24839479 4807