Date: Sun, 14 Dec 2003 23:32:42 +1100 (EST) From: =?iso-8859-1?q?Darryl=20Barlow?= <darrylb_au44@yahoo.com.au> To: freebsd-questions@freebsd.org Subject: "No Carrier" 802.11b FreeBsd 5.1 Avaya Texas Instruments Message-ID: <20031214123242.17492.qmail@web42001.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
I have installed FreeBSD on a Desktop Machine with a
TI 1410 PCI Cardbus
Bridge and an Avaya Silver Wireless Network Card. The
card connects
perfectly to a D-Link Access Point in Debian and even
in Windows XP.
However, in FreeBSD there is "no carrier" no matter
what I seem to try.
Troubleshooting help would be much appreciated.
Device seems to come up with:
ifconfig wi0 inet 192.168.4.8 netmask 255.255.255.0
ssid HOME wepmode ON
wepkey 1234567890
dmesg is as follows:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California.
All rights reserved.
FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at
0xc06d4000.
Preloaded elf module "/boot/kernel/acpi.ko" at
0xc06d421c.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1199664705 Hz
CPU: AMD Athlon(tm) Processor (1199.66-MHz 686-class
CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 134135808 (127 MB)
avail memory = 122912768 (117 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V-133 > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00f1720
acpi0: power button is handled as a fixed feature
programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port
0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge>
mem
0xe6000000-0xe7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver
attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port
0xd800-0xd80f at device 4.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f
irq 9 at device 4.2 on
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f
irq 9 at device 4.3 on
pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <multimedia> at device 9.0 (no driver attached)
cbb0: <TI1410 PCI-CardBus Bridge> at device 10.0 on
pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: slot 10 INTA is routed to irq 5
rl0: <RealTek 8139 10/100BaseTX> port 0xa400-0xa4ff
mem 0xd5000000-0xd50000ff
at device 11.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be
unstable in autoselect mode
pcib0: slot 11 INTA is routed to irq 10
rl0: Ethernet address: 00:50:bf:27:7b:64
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
pci0: <multimedia, audio> at device 12.0 (no driver
attached)
sym0: <810a> port 0x9800-0x98ff mem
0xd4800000-0xd48000ff irq 9 at device 13.0
on pci0
sym0: Symbios NVRAM, ID 7, Fast-10, SE, parity
checking
sym0: open drain IRQ line driver
sym0: using LOAD/STORE-based firmware.
atapci1: <Promise PDC20265 UDMA100 controller> port
0x8000-0x803f,0x8400-0x8403,0x8800-0x8807,0x9000-0x9003,0x9400-0x9407
mem
0xd4000000-0xd401ffff irq 10 at device 17.0 on pci0
ata2: at 0x9400 on atapci1
ata3: at 0x8800 on atapci1
fdc0: <Enhanced floppy controller (i82077, NE72065 or
clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in
COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60
irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
orm0: <Option ROM> at iomem 0xcc000-0xcdfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 16 steps (100% to 6.2%),
currently 100.0%
wi0: <Avaya Communication Avaya Wireless PC Card> at
port 0x100-0x13f irq 5
function 0 config 1 on pccard0
wi0: 802.11 address: 00:02:2d:74:3b:25
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (7.28.1)
wi0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ad0: 29333MB <WDC WD307AA-00BAA0> [59598/16/63] at
ata0-master UDMA66
ad4: 76319MB <ST380011A> [155061/16/63] at ata2-master
UDMA100
ad6: 76319MB <ST380011A> [155061/16/63] at ata3-master
UDMA100
acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-115
0133> at ata1-master PIO4
acd1: DVD-R <PIONEER DVD-RW DVR-106D> at ata1-slave
PIO4
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
ad0: UDMA ICRC error cmd=read fsbn 1529248 retrying
Mounting root from ufs:/dev/ad0s1a
ad0: UDMA ICRC error cmd=read fsbn 4415 of 4415-4418
retrying
ad0: UDMA ICRC error cmd=read fsbn 4415 of 4415-4418
retrying
ad0: UDMA ICRC error cmd=read fsbn 4447 of 4447-4450
retrying
ad0: UDMA ICRC error cmd=read fsbn 4447 of 4447-4450
retrying
ad0: UDMA ICRC error cmd=read fsbn 18463 of
18463-18590 retrying
ad0: UDMA ICRC error cmd=read fsbn 18463 of
18463-18590 retrying
ad0: UDMA ICRC error cmd=read fsbn 18463 of
18463-18590 retrying
ad0: UDMA ICRC error cmd=read fsbn 18463 of
18463-18590 falling back to PIO
mode
ifconfig shows:
wi0:
flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu
1500
inet 192.168.4.88 netmask 0xffffff00 broadcast
192.168.4.255
inet6 fe80::202:2dff:fe74:3b25%wi0 prefixlen
64 scopeid 0x4
ether 00:02:2d:74:3b:25
media: IEEE 802.11 Wireless Ethernet
autoselect (DS/2Mbps)
status: no carrier
ssid HOME 1:HOME
stationname "FreeBSD WaveLAN/IEEE node"
channel -1 authmode OPEN powersavemode OFF
powersavesleep 100
wepmode MIXED weptxkey 1
wepkey 1:64-bit
wicontrol (omitting or changing some details) shows:
NIC serial number: [ ]
Station name: [ FreeBSD
WaveLAN/IEEE node ]
SSID for IBSS creation: [ HOME ]
Current netname (SSID): [ HOME ]
Desired netname (SSID): [ HOME ]
Current BSSID: [
00:40:05:ae:fe:27 ]
Channel list: [ 7ff ]
IBSS channel: [ 10 ]
Current channel: [ 10 ]
Comms quality/signal/noise: [ 41 97 56 ]
dBm Coms Quality: [ 43 ]
Promiscuous mode: [ Off ]
Process 802.11b Frame: [ Off ]
Intersil-Prism2 based card: [ 0 ]
Port type (1=BSS, 3=ad-hoc): [ 1 ]
MAC address: [ ]
TX rate (selection): [ 0 ]
TX rate (actual speed): [ 2 ]
RTS/CTS handshake threshold: [ 2347 ]
Create IBSS: [ Off ]
Access point density: [ 1 ]
Power Mgmt (1=on, 0=off): [ 0 ]
Max sleep time: [ 100 ]
PRI Identity: [ 21 1 4 4 ]
STA Identity: [ 31 1 7 28 ]
Card ID register: [ 1 1 4 2 ]
Regulatory Domains: [ usa, canada,
eu/au, es, fr, jp new ]
Temperature Range: [ 1 ]
WEP encryption: [ On ]
TX encryption key: [ 1 ]
Encryption keys: [ ][ ][ ][ ]
http://personals.yahoo.com.au - Yahoo! Personals
New people, new possibilities. FREE for a limited time.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031214123242.17492.qmail>